In SSRS 2005, I have created a graph with x and y axis.
On the graph there are several lines based on the sql query.
The question is, how is it possible to place the last value in (y axis) on the last point of the graph line.
Thanks
I have a line graph which shows positive and negative values. Is it possible to have the line one color when its negative and another when its positive?
kam
Hey guys. I feel like the prodigal son that has returned. It's been while!
In your experience, what is the most like kind of cause to the cpu graph sitting quite high most of the time along with a constant second graph line in red at around the 10% line.
I feel that my aim should be to get rid of the red line alltogether. I've got a few ideas, but I don't know for certain how to target that particular symptom.
Any suggestions?
Hi
Is it possible to specify the last value as a data label on a line graph...
Regards
Karen
Hello,I am in the process of making a very simple stats page that will show us how many tasks we've completed. Here is what I have so far: Here is the SQL that makes it work: SelectCommand="SELECT Count(TicketID), Category FROM Tickets GROUP BY Category ORDER BY Count(TicketID) DESC ">My problem is with how the totals seem to go on forever. Instead of being in proportion to each other as a percentage of a the total amount of tickets.. they just increase in size with each additonal entry. Can someone help me restructure this so that I can calculate the totals individually and as a whole and then apply the totals to create a proportional bar graph?Thank you greatly for your help,Mark
View 2 Replies View RelatedI am developing several charts with column type and sub type as stacked. There is a requirement from the users that they want an option to choose the type of chart.
Is it possible to change chart type dynamically from say Column type to Line type based on user option in front-end?
Any help will be appreciated.
Thanks in advance !!
I am trying to use FOR XML under SQL Server 2014 to write out a large XML data set. I want it to look like
<CVS_Member_Add_Change>
  <RecordType>3</RecordType>
  <Carrier>1266</Carrier>
  <MultiBirthCode>0000000</MultiBirthCode>
  <MemberType></MemberType>
[Code] ....
That's how it looks when you click on the results of a small subset of the query. Â Just what I want. Â Unfortunately when you try to right click and save it you getÂ
<dataroot><CVS_Member_Add_Change><RecordType>3</RecordType><Carrier>1266</Carrier<MultiBirthCode>0000000</MultiBirthCode><MemberType></MemberType<LanguageCode>1</LanguageCode><DURFlag></DURFlag><DURKey></DURKey><SocialSecurityNumber>000000000</SocialSecurityNumber</CVS_Member_Add_Change>
Everything being on one line blows up the translator application that reads the data.
The FOR XML statement copied out of the query is below.
FOR XML RAW ('CVS_Member_Add_Change'), ROOT('dataroot'), ELEMENTSÂ
GO
Is there a way in the T-SQL to force it to break lines neatly?
Is there a way to force it to a specific file name or directory?
Basically I'm running a number of selects, using unions to write out each select query as a distinct line in the output. Each line needs to be multiplied by -1 in order to create an offset balance (yes this is balance sheet related stuff) for each line. Each select will have a different piece of criteria.
Although I have it working, I'm thinking there's a much better or cleaner way to do it (I use the word better loosely)
Example:
SELECT 'Asset', 'House', TotalPrice * -1
FROM Accounts
WHERE AvgAmount > 0
UNION
SELECT 'Balance', 'Cover', TotalPrice
FROM Accounts
WHERE AvgAmount > 0
What gets messy here is having to write a similar set of queries where the amount is < 0 or = 0
I'm thinking something along the lines of building a table function contains all the descriptive text returning the relative values based on the AvgAmount I pass to it.
I'm hoping to create a graph with durations as bar graphs and % met as a line graph. Is this possible in BIDS?
View 1 Replies View RelatedHi,
for some AP issue, the file I upload must be without the line feed/carriage return in the last line.
for example:
original fixed-length file (exported from SSIS)
line NO DATA
1 AA123456 50 60
2 BB123456 30 40
3 CC123456 80 90
4 <-- with line feed/carriage return in the last line
The file format that AP request. The file only has 3 records, so it should end in the third line.
line NO DATA
1 AA123456 50 60
2 BB123456 30 40
3 CC123456 80 90
Should I use script component to do it ? I am new for VB . Anyone would help me ?
Thank you all.
I need the Trend line for the following data in Line chart they are the following data. The following are the graph are my output and i need the trend line for these Key_gap value.
This is the link [URL] ....
I need the same trend line for the Bar-Chart in SSRS 2005.
I hope I'm posting this in the correct forum (forgive me if I'm not) since I'm not sure if this is an issue with inserting an item into a db or the processing of what I get out of it. I wrote a basic commenting system in which someone my post a comment about something written on the site. I wanted to keep it very simple, but I at least want the ability for a user to have newlines in their comment without having to hardcode a <br /> or something like that. Is there a way for me to detect a newline if someone, for example, is going to their next paragraph?
Let me know if you need a better explanation.
Thanks in advance!
G'day everyoneThat's a space between the ticks.It's all part of a longer script but seeing as the failure occurs online 1if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[config]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[config]GOThat's three lines only. Does it matter that they're in Unicode?Any ideas?Kind regards,Bruce M. AxtensSoftware EngineerStrapper Technologies
View 3 Replies View RelatedWe have a line graph which plots the actual data points (x,y), everything is working fine with this graph. Now we need to add a trend line to this existing graph after going thro. the articles we came to know that there is no direct option in SSRS to draw a trend line. So we need to calculate the trend values ourselves which we need to plot as atrend line. This trend line is similar to the trend line which comes in Excel chart, do anyone know how to calculate the trend values from the actual data points. We got through several formulas, but were not clear, have anyone tried out exactly the same, if so please help us out by providing an example to calculate the trend values.
View 1 Replies View RelatedHEllo can anybody tell me how to monitor a long store procedure
line by line. Also how to put progress bar in it to tell user how
much is done.
Sabih.
Hi,
When creating a line chart, I would like to be able to show Markers for the data points, but no line between these points (as you can do in excel).
I have set the line setting to none (for the lines of interest), however the lines still show.
Is this a bug, or am i missing something obvious settings-wise?
Cheers,
M
Im a beginner here and i have a graph, in the graph I need to show the actual number that the graph is showing can i do this. My graph has numbers that go down the side from 5,000 to 0 in 1000, increments. Say the number is 2234 i need to show thatnumber in that graph somewhere. Can i do that?
HiIt's my stored procedure 1 CREATE PROCEDURE singleSearch2
2 @SQ nvarchar(30),
3 @pType nvarchar(11),
4 @pCol nvarchar(11)
5 AS
6 BEGIN
7 DECLARE @SQL NVarChar(1000)
8 SELECT @SQL='SELECT *,'
9 SELECT @SQL=@SQL+' CASE RTRIM(LTRIM(op))'
10 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'e'+CHAR(39)+' THEN '+CHAR(39)+'اجاره'+ CHAR(39)
11 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'r'+CHAR(39)+' THEN '+CHAR(39)+'رهن'+CHAR(39)
12 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'f'+ CHAR(39)+' THEN '+ CHAR(39) +' Ù?روش '+CHAR(39)
13 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'e r'+CHAR(39)+' THEN '+CHAR(39)+ 'اجاره - رهن '+CHAR(39)
14 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'e f'+CHAR(39)+' THEN '+CHAR(39)+'اجاره - Ù?روش '+CHAR(39)
15 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'r f'+CHAR(39)+' THEN '+CHAR(39)+' رهن - Ù?روش '+CHAR(39)
16 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'e r f'+CHAR(39)+' THEN '+CHAR(39)+'اجاره - رهن - Ù?روش'+CHAR(39)
17 SELECT @SQL=@SQL+' ELSE op END AS xop, CASE LTRIM(RTRIM(type)) '
18 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'z -'+CHAR(39)+' THEN '+CHAR(39)+'زمین'+CHAR(39)
19 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'m -'+CHAR(39)+' THEN '+CHAR(39)+'مسکونی'+CHAR(39)
20 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'t -'+CHAR(39)+' THEN '+CHAR(39)+'تجاری'+CHAR(39)
21 SELECT @SQL=@SQL+' ELSE [type] END AS [xtype] FROM [data] '
22 SELECT @SQL=@SQL+' WHERE ([type] LIKE %'+CHAR(39)+@pType+CHAR(39)+'%) AND ('+@pCol+' LIKE %'+CHAR(39)+@SQ+CHAR(39)+'%)'
23 Exec (@SQL)
24 END
25 GO
and i face this error: Line 1: Incorrect syntax near '-'.
Hi
Anyone have any idea how to make a line style dashed or dotted in a line chart please?
If I change the series style to dashed or dotted it still appears as a solid line, yet the legend displays a dashed or dotted line....
Thanks
My question is about coding style for specifying constraints when creating tables.
Two styles for defining constraints:
In-line:
CREATE TABLE Fruit
(
FruitID INT IDENTITY(1,1)
CONSTRAINT PK_fruit PRIMARY KEY CLUSTERED,
FruitName NVARCHAR(50),
FruitTypeID INT
CONSTRAINT FK_fruit_fruit_types FOREIGN KEY
REFERENCES FruitTypes (FruitTypeID) ON UPDATE CASCADE,
DateCreated DATETIME DEFAULT GETDATE()
)
Out-of-line:
CREATE TABLE Fruit
(
FruitID INT,
FruitName NVARCHAR(50),
FruitTypeID INT,
DateCreated DATETIME
)
ALTER TABLE Fruit ALTER COLUMN FruitID INT NOT NULL
ALTER TABLE Fruit ADD
CONSTRAINT PK_fruit PRIMARY KEY CLUSTERED (FruitID),
CONSTRAINT FK_fruit_fruit_types FOREIGN KEY (FruitTypeID)
REFERENCES FruitTypes (FruitTypeID),
CONSTRAINT DF_fruit_date_created DEFAULT
GETDATE() FOR DateCreated
Which style do you prefer and why?
Hi folks,
I run into problems where some metrics have value associated with dim attributes Markets where some don't have... The graph shows NaN, in the reporting services. Is there a way to get of NaN. something like filter out.
--Imran
Hi everybody,
I've been reading the book MCITP Self-Paced Training Kit (Exam 70-441): Designing Database Solutions by Using Microsoft SQL Server(TM) 2005 (Self-Paced Training Kits) as a part of my preparation for exam 70-441
The book is really clear, and I could understand everything easily because I've some experience as a database developer.
Until now, there's only one thing that I didn't fully understand:
On pages 53 and 54, it mentions a type of hierarchy called: a graph hierarchy, and it gives a small example made the things even more complicated
I've many books about database design theories, but they don't use the term (graph hierarchy) any where...
So, I appreciate if you can point me to an online resource or a book that discusses this term thorougly.
Thank you
Hi,
I have setup a chart with series on right hand side.
The series is from one of the fields.
How is it possible to remove series and instead place each series name on a graph line?
Or at the very least, how can I place a text on each graph line?
Thanks
Hello everybody,
I have a small challenge for you.
I'm developing an application using SQL Integration Services and SQL Reporting Services. I need to have the ability to drill down from a graph created with Reporting Services.
Let me explain: If I have a pie chart, I want to be able to click in one of the slides and see the information details that could be in another graph or in a table.
Somebody know how to do this?
Thanks for your help
I have a simple bar graph. All I am looking to do is display the values on each bar. Can someone please help me. Thanks
View 1 Replies View RelatedHi,
I tried to backup the master key by the following syntax :
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'mypassword'
BACKUP MASTER KEY TO FILE = 'c: empmaster' ENCRYPTION BY PASSWORD = 'mypassword'
but it failed and i got the following message:
Cannot write into file 'c: empmaster'. Verify that you have write permissions, that the file path is valid, and that the file does not already exist.
NB: I am using the "sa" user to execute this command.
I know that we have a security permission issue , but where and how ?
Regards,
Tarek Ghazali
SQL Server MVP
Good evening,
View 8 Replies View RelatedHi!
I need to represent a graph in TSQL.
The graph is directed. It is essentially a number of trees which all have various (non-root) nodes in common with each other.
Any ideas or pointers would be most welcome :)
Thanks,
Angelos
Hi,
trying to develop a report that shows the sum total for each month during a specified date range.
I have parameters asking for the start date and end date of the date range, the report needs to show the months in between this date range.
One of the fields in the dataset is durationminutes which I need to sum for each month then divide by 60 to show hours. I then need to show the total of each month in a bar graph (with each month along the x axis).
If anyone can shed some light on how I am going to do this it would be greatly appreciated.
Thanks.
I'm going to create a graph using SSRS. there is a date field. I want to show only the date , not with the time. How do I do this?
Also Can I use two different data sets in a single graph?
Thanks
i wanna create two line types on the same graph. I'm using the following queries.
Code Block
select count(l.created) as LoanOriginationNumberPreApproved , convert(char( 11), l.Created) as PreApprovedDate
from LoanApplication l
where l.Status <> 'Cancelled'
Group by l.Created
and
Code Block
select count(l.SubmittedOn) as LoanOriginationNumber , convert(char( 11), l.SubmittedOn) as SubmittedDate
from LoanApplication l
where l.Status <> 'Cancelled'
Group by l.SubmittedOn
I combined these queries. I add clumns of the second query to select statement of first code. also added group by l.submittedon to group by l,created as group by l.created, l.submiited on. This is the problem.(I mean grouping)
But then SSRS does not allow me to put preaaproveddate and submitteddate to drop category filed?
Does anyone know how to do that?
I have a report control in my report. But I want to expand graph depending on the selected number of months (Parameter) by users.
But there is no formula option for graph control. Is there any workaround?
Greetings,
I dont know where to post this. I am hoping someone else has run into this in the past.
I have a report with a chart component that works fine in i.e and safari. In fire fox the chart is stretched really bad. If I right click on the image or press reload from the report toolbar the chart is correct.
Whats really odd is this happens only when the toolbar is visible.