Xml Parsing Error:system Error:265926
May 19, 2004
Hello,
When i run text data through OPENXML which has data more than 3956 charcters i get the following error .
Server: Msg 6603, Level 16, State 1
XML parsing error: System error: 265926
Microsoft has the following fix..
http://support.microsoft.com/default.aspx?scid=kb;EN-US;285006
But I already have SQL Server 2000 service pack 3 and MDAC 2.7 service pack 1 refresh . I did upgrade to sql server 2000 Service Pack 3a with no luck. I was wondering if any one faced a similar situation ....
Thanks!!!
View 1 Replies
ADVERTISEMENT
Nov 25, 2007
System.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)
i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.
Thanks,
View 2 Replies
View Related
Nov 13, 2007
heres my code behind in UploadImage.aspx.vb _____________________________________________________________________________________________________________________________Imports System.Data.SqlClientImports System.ConfigurationImports System.IOPartial Class UploadImage Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim conn As New SqlConnection Dim comm As New SqlCommand Dim connStr As String connStr = ConfigurationManager.ConnectionStrings("TESDA").ConnectionString conn = New SqlConnection(connStr) comm = New SqlCommand("Insert into TImage (CategoryName,Picture,MimeType) VALUES (@name,@pic,@type)", conn) 'gi convert and image to byte array Dim data(FileUpload1.PostedFile.ContentLength - 1) As Byte FileUpload1.PostedFile.InputStream.Read(data, 0, FileUpload1.PostedFile.ContentLength) comm.Parameters.Add("name", System.Data.SqlDbType.Text) comm.Parameters("name").Value = System.IO.Path.GetFileName(FileUpload1.PostedFile.FileName).ToLower comm.Parameters.Add("pic", System.Data.SqlDbType.Image) comm.Parameters("pic").Value = data comm.Parameters.Add("type", System.Data.SqlDbType.NChar) comm.Parameters("type").Value = FileUpload1.PostedFile.ContentType If FileUpload1.HasFile = True Then Try conn.Open() comm.ExecuteScalar() Label1.Text = "Successfully uploaded" conn.Close() Finally End Try End If End Sub Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load End Sub Protected Sub Button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button2.Click Server.Transfer("image.aspx") End SubEnd Class______________________________________________________________________________________________________________________________then here my code behind in Image.aspx.vb________________________________________________________________________________________________________Imports System.Data.SqlClientImports System.ConfigurationPartial Class image Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim conn As New SqlConnection Dim comm As New SqlCommand Dim connStr As String Dim reader As SqlDataReader Dim dataBuffer() As Byte connStr = ConfigurationManager.ConnectionStrings("TESDA").ConnectionString conn = New SqlConnection(connStr) comm = New SqlCommand("Select * from TImage where no = @no", conn) comm.Parameters.Add("no", System.Data.SqlDbType.Int) comm.Parameters("no").Value = 5 conn.Open() reader = comm.ExecuteReader reader.Read() Response.Clear() Response.AddHeader("Content-type", reader("CategoryName")) Response.AddHeader("Content-type", reader("MimeType")) Dim blen As Integer = CType(reader("picture"), Byte()).Length dataBuffer = reader("Picture") Response.OutputStream.Write(dataBuffer, 0, blen) Response.Close() conn.Close() End SubEnd Class_____________________________________________________________________________________________________________________ When I am going to call the Image.aspx it always prompt this error:XML Parsing Error: no element foundLocation: http://localhost:4730/tesdaweb/UploadImage.aspxLine Number 1, Column 1:Is there something wrong in my codes... Please helpthanks...
View 1 Replies
View Related
Sep 7, 2007
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
View 5 Replies
View Related
Oct 5, 2007
Hi, i am getting an error message after executed this code, i am not familiar with SQL CE, i have no idea to solve this problem. Following is my code and the error message.
SQL Statement =
SELECT Distinct(CustID),CustName FROM tblBirtdhayList WHERE
DatePart(Month,date_of_birth) = DatePart(Month, @StartDate)
Passing Parameter :
daBirthDay.AddInParameter(cmdBirthDay, "@StartDate", DbType.String, StartDate)
Error Message : There was an error parsing the query [Token Line Number = 1, Token Line Offset = 377, Token in Error = ) ]
View 3 Replies
View Related
Apr 2, 2007
hi all
I try to run the query below it throw me an exception, error parsing , is there anywat to resolve it?
SELECT TYPE2.list_price as 'TYPE2'
FROM TBL_MST_PRICE TYPE2
WHERE
price_grp_code = (SELECT price_grp_code FROM TBL_MST_PRICE_GRP WHERE prd_code = '' AND cust_code = '')
View 1 Replies
View Related
Sep 20, 2007
There was an error parsing the query. [ Token line number = 8,Token line offset = 26,Token in error = UPDATE ]
*********************** START CODE ***********************
CmdString = @"INSERT INTO tbl_document
(Batch_id, DocLastUser_id, FileDrawer_id, ParentDocument_id, DocCount, PageNumber, FileName, FileSize, FileCRC, DocIndexed, DocVerified,
DocCommitted, DocOCR, DocLastUpdated, SynchronizationKey)
VALUES (@Batch_id,@DocLastUser_id,@FileDrawer_id, -10, @DocCount, @PageNumber, @FileName, @FileSize, @FileCRC, @DocIndexed, @DocVerified, @DocCommitted, @DocOCR, GETDATE(), @Batch_id
+ N'_' +@FileName + N' _' + GETDATE())
UPDATE tbl_document
SET ParentDocument_id = @@IDENTITY
WHERE (Document_id = @@IDENTITY)";
ReturnCmd = New SqlCeCommand(CmdString, conn);
ReturnCmd.CommandType = CommandType.Text;
// Adds Parameters to cmd.Parameters
GetDBParameter(cmd.Parameters, inDb2Use, "@DocLastUser_id", Globals.gUserID);
GetDBParameter(cmd.Parameters, inDb2Use, "@DocCount", inObject2Insert.Count);
GetDBParameter(cmd.Parameters, inDb2Use, "@PageNumber", inObject2Insert.PageNumber);
GetDBParameter(cmd.Parameters, inDb2Use, "@FileName", inObject2Insert.FilePath);
GetDBParameter(cmd.Parameters, inDb2Use, "@FileSize", inObject2Insert.FileSize);
GetDBParameter(cmd.Parameters, inDb2Use, "@FileCRC", inObject2Insert.FileCRC);
GetDBParameter(cmd.Parameters, inDb2Use, "@DocIndexed", inObject2Insert.Indexed);
GetDBParameter(cmd.Parameters, inDb2Use, "@DocVerified", inObject2Insert.Verified);
GetDBParameter(cmd.Parameters, inDb2Use, "@DocCommitted", inObject2Insert.Committed);
GetDBParameter(cmd.Parameters, inDb2Use, "@Batch_id", inObject2Insert.Batch_id);
GetDBParameter(cmd.Parameters, inDb2Use, "@FileDrawer_id", inObject2Insert.FileDrawer_id);
GetDBParameter(cmd.Parameters, inDb2Use, "@DocOCR", inObject2Insert.OCR);
GetDBParameter(cmd.Parameters, inDb2Use, "@Id", SqlDbType.Int, True);
cmd.ExecuteScalar()
*********************** END CODE ***********************
Is it that you cannot run more than one cmd type per cmd, or is there someother call that i need to make? I've made other calls to the database for Inserts and Updates and Gets, they all work fine.
Please help ASAP
View 1 Replies
View Related
May 23, 2007
We are using sql server 2005 Enterprise Edition with service pack1
I got the following error messages in the SQL log
The operating system returned error 21(The device is not ready.) to SQL Server during a read at offset 0x00000000090000 in file '....mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
fcb::close-flush: Operating system error 21(The device is not ready.) encountered.
I got these errors for about 2 hrs and after that I see these messages in the sql log
Starting up database ' '
1 transactions rolled forward in database '' (). This is an informational message only. No user action is required.
0 transactions rolled back in database ' ' (). This is an informational message only. No user action is required.
Recovery is writing a checkpoint in database ' ' ( ). This is an informational message only. No user action is required.
CHECKDB for database '' finished without errors on (local time). This is an informational message only; no user action is required.
Can anyone please help me in troubleshooting this issue. Why this migh have happened.
any help would be appreciated.
Thanks
View 5 Replies
View Related
Jun 20, 2007
Hi there
I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.
I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.
It reads in the description
c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:
Operating system error 112(error not found) encountered.
Looking in the error log I see :
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.
Error: 17053, Severity: 16, State: 1.
C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.
DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.
This is a new server with about 90% of disk space NTFS still available
Any idea's thanks.
View 5 Replies
View Related
Mar 22, 2006
HI ,
This is a problem I encountered when I had to detach a database file (type .mdf):
1) I went to the MS SQL Management Server Studi and detached my database file successfully from a connection called Workhorse.
2) I needed to place the .mdf database file into a zip file in order to put it on a remote server. I did this using Shared Portal. This was also successful
3) However when I tried reattaching the database file, I got this error:
CREATE FILE encountered operating system error 5A(Access denied.) while attempting to open or create the physical file "CProgram FilesMSSQL ServerMSSQLData<databasename>.mdf'
Q) The database file and log file (ldf) exist in the correct directory so I don't know what happened. Can any one help?
Thanks much
Tonante
View 42 Replies
View Related
Nov 20, 2006
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
View 5 Replies
View Related
Dec 28, 2005
Hi,I keep getting this error message for a trans.log backup.Operating system error112(error not found).The disk has about 6GB space free, and the backup should only take upabout 550 MB, so I would think it is not space related but...The disk is NTFS.Any ideas?
View 2 Replies
View Related
Apr 20, 2007
Hi.
I'm very new to DB stuff. I've created a SQL Server CE database and I'm trying to implement a query notification using a SqlDependency object, as per the instructions at:
http://www.codeproject.com/cs/database/chatter.asp
I've connected to my DB using SQL Server Management Studio Express, and I'm getting the following error when trying to execute an ALTER DATABASE command:
I have no clue what I could be doing wrong. Is this operation supported using CE? Is there really something wrong with my syntax?
Major Error 0x80040E14, Minor Error 25501
> alter database GESim.Diagnostics set ENABLE_BROKER
There was an error parsing the query. [ Token line number = 1,Token line offset = 7,Token in error = database ]
Help appreciated...
Just Mike
View 3 Replies
View Related
Jun 8, 2007
I have a package that opens an XML file and stores the XML to a variable. Then the package executes a stored procedure passing the variable containing the XML data. This package had been working perfectly until I applied service pack 2 to SQL Server. Now when I execute the package I get an error when the stored procedure attempts to exeucte. The error is: "XML parsing: line 615, character 11, illegal xml character". The strange thing is that I can run profiler and copy out the command that is being executed and paste it into a query window and it exeuctes successfully in the query window. So does anyone know what changed with service pack two that is causing this problem and/or how to resolve it?
The position that the error message is referring to is the last character in the xml variable that the package is passing to the stored procedure. What I find strange is that it throws an error when called from the package but not when executed in the query window. Any help would be greatly appreciated. Below is a copy of the command from profiler that is throwing the error:
exec sp_executesql N'EXEC dbo.ABF_UpdateBillerList @P1, @P2',N'@P1 nvarchar(max),@P2 datetime',N'<billers>
<biller Key="8958">
<billerFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</billerFieldUpdates>
<addresses>
<address Key="26741">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="26742">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33073">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33074">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
</addresses>
<masks>
<mask Key="218293">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
<mask Key="218888">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
</masks>
<akas>
<aka Key="13159">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="13160">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="13161">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="16948">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
</akas>
<contacts>
<contact Key="26740">
<contactFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</contactFieldUpdates>
<phones>
<phone Key="16411">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
<phone Key="16412">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
<biller Key="5136">
<billerFieldUpdates effDate="2007-06-07">
<acdind>C</acdind>
<billerNoteCurrent>State Farm Insurance is accepting payments electronically for auto, life, fire and health premium payments. Verify the premium account number matches one of the masks AND one of the addresses listed. Send all Paper Payments to: P. O. Box 588002, North Metro, GA 30029-8002, they may be addressed to State Farm Insurance or State Farm Insurance Support Center or Insurance Support Center</billerNoteCurrent>
<billerNotePrior>State Farm Insurance is accepting payments electronically for auto, life, fire and health premium payments. Verify the premium account number matches one of the masks AND one of the addresses listed. Send all Paper Payments to: P. O. Box 588002, North Metro, GA 30028-8002, they may be addressed to State Farm Insurance or State Farm Insurance Support Center or Insurance Support Center</billerNotePrior>
</billerFieldUpdates>
</biller>
<biller Key="8820">
<masks>
<mask Key="229786">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>560100##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229787">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>570105##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229788">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>570106##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229789">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>580100##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
</biller>
<biller Key="9494">
<addresses>
<address Key="37164">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 1087</address1Current>
<cityCurrent>Norwich </cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>CT</stateCurrent>
<postalCodeCurrent>06360-1087</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
<akas>
<aka Key="20439">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Norwich Dept of Public Utilities</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="7572">
<masks>
<mask Key="229757">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>5########</maskFormatCurrent>
<maskLengthCurrent>9</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
</biller>
<biller Key="8844">
<addresses>
<address Key="26200">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>07101-0197</postalCodeCurrent>
<postalCodePrior>07101</postalCodePrior>
</addressFieldUpdates>
</address>
<address Key="26201">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>90030-0179</postalCodeCurrent>
<postalCodePrior>90030</postalCodePrior>
</addressFieldUpdates>
</address>
<address Key="37112">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 7835</address1Current>
<cityCurrent>Edison</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>NJ</stateCurrent>
<postalCodeCurrent>08818-7835</postalCodeCurrent>
</addressFieldUpdates>
</address>
<address Key="37113">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 54228</address1Current>
<cityCurrent>Los Angeles</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>CA</stateCurrent>
<postalCodeCurrent>90054-0228</postalCodeCurrent>
</addressFieldUpdates>
</address>
<address Key="37114">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 11731</address1Current>
<cityCurrent>Newark</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>NJ</stateCurrent>
<postalCodeCurrent>07101-4731</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
<akas>
<aka Key="20435">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>First Investors - SMART</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20436">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>First Investors Federal - Smart</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
<contacts>
<contact Key="26199">
<contactFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<stateCurrent />
<statePrior>NJ</statePrior>
<emailCurrent>billersupport@orcc.com</emailCurrent>
<emailPrior>billersupport@princetonecom.com</emailPrior>
<organizationCurrent>Online Resources</organizationCurrent>
<organizationPrior>Princeton eCom</organizationPrior>
</contactFieldUpdates>
<phones>
<phone Key="16180">
<phoneFieldUpdates effDate="2007-06-11">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
<phone Key="19346">
<phoneFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<phoneNumCurrent>609-606-3370</phoneNumCurrent>
<phoneTypeCurrent>Phone</phoneTypeCurrent>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
<biller Key="3956">
<masks>
<mask Key="123272">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>601921##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="123912">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>601918##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229658">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>601916##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229659">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>603464##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
</biller>
<biller Key="8215">
<addresses>
<address Key="20880">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>19355-1114</postalCodeCurrent>
<postalCodePrior>19355</postalCodePrior>
</addressFieldUpdates>
</address>
<address Key="20885">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>19493-0001</postalCodeCurrent>
<postalCodePrior>19493</postalCodePrior>
</addressFieldUpdates>
</address>
</addresses>
<akas>
<aka Key="19477">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Transamerica Life Insurance Company</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="19478">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>TLIC</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="7450">
<billerFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</billerFieldUpdates>
<addresses>
<address Key="31492">
<addressFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
</addresses>
<contacts>
<contact Key="31491">
<contactFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</contactFieldUpdates>
<phones>
<phone Key="17309">
<phoneFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
<biller Key="8169">
<akas>
<aka Key="20419">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLICO CO.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20420">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life Insurance Co.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20421">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLIC LTC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20422">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Long Term Care</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20423">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth LTC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20424">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLAIC Co.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20425">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life and Annuity Insurance Company</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20426">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life and Annuity Insurance Co.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20427">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLAIC LTC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20428">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Metlife, CO.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20429">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Metlife Insurance Co of Connecticut</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20430">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>MIC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20431">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Metlife Ins Co of CT</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20432">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLICNY CO.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20433">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life Insurance Co of New York</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20434">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLICNY LTC</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="9983">
<addresses>
<address Key="37075">
<addressFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<address1Current>PO Box 1335</address1Current>
<cityCurrent>Buffalo</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>NY</stateCurrent>
<postalCodeCurrent>14240-1335</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
<masks>
<mask Key="229671">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>##############</maskFormatCurrent>
<maskLengthCurrent>14</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229672">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>###############</maskFormatCurrent>
<maskLengthCurrent>15</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229673">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>##################</maskFormatCurrent>
<maskLengthCurrent>18</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229674">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>####-####</maskFormatCurrent>
<maskLengthCurrent>9</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229675">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>###-####</maskFormatCurrent>
<maskLengthCurrent>8</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
<akas>
<aka Key="20380">
<akaFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<nameCurrent>Creditor Interchange</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20381">
<akaFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<nameCurrent>Creditors Exchange</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="1767">
<addresses>
<address Key="5189">
<addressFieldUpdates effDate="2007-06-06">
<acdind>C</acdind>
<postalCodeCurrent>50704-0780</postalCodeCurrent>
<postalCodePrior>50704-0788</postalCodePrior>
</addressFieldUpdates>
</address>
</addresses>
</biller>
<biller Key="1770">
<addresses>
<address Key="37073">
<addressFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<address1Current>1001 Fannin St. STE 4000</address1Current>
<cityCurrent>Houston</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>TX</stateCurrent>
<postalCodeCurrent>77002-6711</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
</biller>
<biller Key="10101">
<addresses>
<address Key="36672">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>15250-7877</postalCodeCurrent>
<postalCodePrior>15250-0877</postalCodePrior>
</addressFieldUpdates>
</address>
</addresses>
</biller>
<biller Key="8957">
<billerFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</billerFieldUpdates>
<addresses>
<address Key="26738">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="26739">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33071">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33072">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
</addresses>
<masks>
<mask Key="218292">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
<mask Key="218887">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
</masks>
<akas>
<aka Key="13157">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="13158">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="16947">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
</akas>
<contacts>
<contact Key="26737">
<contactFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</contactFieldUpdates>
<phones>
<phone Key="16409">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
<phone Key="16410">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
</billers> ','2007-06-05 00:00:00:000'
Thanks!
gn
View 5 Replies
View Related
May 12, 2006
Hello All,
I have come across this issue with the Flat File Source when the delimiter is set to a comma.
"""KAILUA KONA,HI""","CA",
In the data snippet above and with the setting of using a comma as a column delimiter
and a " as the text qualifer.
the data will be parsed in this fashion:
"""KAILUA as a column:
HI""" as a column
CA as column
when it should be
"KAILUA,HI" as a column
CA as column.
Is there a way to let the Flat File Source to let it know not to parse the data in multiple quotes ?
Thank you
Eric Flores
View 5 Replies
View Related
May 13, 2004
Windows 2000 Server SP4 + SQL Server 2000 Enterprise Editon SP3,RAID5.
the windows event log give the following error information:
I/O error 2(The system cannot find the file specified) detected during write at offset 0x0000010c6c4000 in file 'D:Program FilesMicrosoft SQL ServerMSSQLdataGJSZBANK_Data.MDF'.
I have searched microsoft knowledge base and got this article:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;828339
but don't understand some contents in the topic:
For example, if you encounter the following error message in the SQL Server Errorlog file, SQL Server encountered operating system error 2 when it uses a Windows API call to write to the tempdb primary database file:
Error: 823, Severity: 24, State: 4
I/O error 2(The system cannot find the file specified.) detected during write at offset 0x00000000284000 in file 'D:Program FilesMicrosoft SQL ServerMSSQLdata empdb.mdf'
Because SQL Server has already successfully opened the file and did not receive an “Invalid Handle” error, the error is likely being raised in a lower-level kernel software component, such as the file system or a device driver. This problem does not indicate a problem in SQL Server, and it must be investigated as an issue with the file system or a device driver that is associated with the file.
Does that mean this is not a SQL Server error?
Does that mean something wrong with my operating system? or something wrong with my hard disk?
View 1 Replies
View Related
Jan 29, 2007
Hello!
Hopefully someone can help me.
I have scripts to refresh database as SQL daily jobs. (O.S is Win2K3 and SQL server 2000 and SP4) It was worked and I got the following message this morning from SQL error log.
Internal I/O request 0x5FDA3C50: Op: Read, pBuffer: 0x0D860000, Size: 65536, Position: 25534864896, RetryCount: 10, UMS: Internal: 0x483099C8, InternalHigh: 0x0, Offset: 0xF1FF1E00, OffsetHigh: 0x5, m_buf: 0x0D860000, m_len: 65536, m_actualBytes: 0, m_errcode: 1450, BackupFile: \XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK
BackupMedium::ReportIoError: read failure on backup device '\XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK'. Operating system error 1450(Insufficient system resources exist to complete the requested service.).
View 1 Replies
View Related
Jul 20, 2005
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
View 3 Replies
View Related
Jul 5, 2007
Hello,
I am getting the following error from my SqlClr proc. I am using a third party API, which is making call to some webservice.
System.InvalidOperationException: There is an error in XML document (11, 2). ---> System.ArgumentException: Item has already been added. Key in dictionary: 'urn:iControl:Common.ULong64' Key being added: 'urn:iControl:Common.ULong64'
System.ArgumentException:
at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
at System.Collections.Hashtable.Add(Object key, Object value)
at System.Xml.Serialization.XmlSerializationReader.AddReadCallback(String name, String ns, Type type, XmlSerializationReadCallback read)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.InitCallbacks()
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, Boolean elementCanBeType, String& fixupReference)
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, String& fixupReference)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.Read5926_get_failover_stateResponse()
at Microsoft.Xml.Serialization.GeneratedAssembly.ArrayOfObjectSerializer8221.Deserialize(XmlSerializationReader reader)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, Xml
...
System.InvalidOperationException:
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at iControl.SystemFailover.get_failover_state()
at F5CacheManager.GetActiveLBIPaddress()
Found a similar problem in a different thread, but couldn't find any solution. I was wondering if there is an open case for this issue?
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=398142&SiteID=1
View 4 Replies
View Related
May 29, 2008
I'm sure I am not undestanding some basic concept here but the following formula always produces an invalid token error at the '-' sign. In this example, I'm trying to subtract out a specific month from the total (this is a simplified example, my actual formula needs to compute a % change over time using lag...)
This produces the invalid token error (it always errors at the '-' in the equation)
with member [Measures].[MyCalcMeasure] as [Measures].[MyBaseMeasure]-([Date Submitted].[Date Submitted YQMD].[month].&[2008]&[1],[Measures].[MyBaseMeasure])
select [Measures].[MyCalcMeasure] on columns,
[MyDim].[MyHierarchy].[Level1].members on rows
from MyCube
But this works
with member [Measures].[MyCalcMeasure] as [Measures].[MyBaseMeasure]
select [Measures].[MyCalcMeasure] on columns,
[MyDim].[MyHierarchy].[Level1].members on rows
from MyCube
As does this
with member [Measures].[MyCalcMeasure] as ([Date Submitted].[Date Submitted YQMD].[month].&[2008]&[1],[Measures].[MyBaseMeasure])
select [Measures].[MyCalcMeasure] on columns,
[MyDim].[MyHierarchy].[Level1].members on rows
from MyCube
What am I missing?
View 3 Replies
View Related
Jan 14, 2008
Hello everyone,
I have a package that extracts data from a Flat File. If any errors or truncation occur during the extraction of the input data, the package should fail. All fields that have erroneous values should be reported in the log file.
My Solution:
- I have created a Data Flow Task that contains a Flat File Source Adapter and a dummy destination.
- I have left the default "Error Output" configuration of the Flat File Source adapter, namely if a truncation or an error occur for a certain column, then the reaction is "Fail Component".
Problem:
This configuration gives me only the first erroneous column in the row being processed.
Question:
Is it possible to make the Flat File Source adapter continue parsing the current row before it fails? This way, I would be able to get all the erroneous columns in the row in one shot.
Thanks in advance...
Samar
View 6 Replies
View Related
Nov 2, 2006
Hi,
Does anyone else have this error message pop up in SSMS when you try to parse sql statements:
.Net SqlClient Data Provider: Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
There was a thread back in March 2006 that mentioned this error, but the posted resolution was to install SP1. I have SP1 installed but I still get the error.
I only receive the error when I'm parsing statements, if I run the statement it's fine.
Thanks
Matt
View 8 Replies
View Related
Jul 27, 2007
Hello all
Trying to delete some data from a SSCE (2005) DB produces the exception:
SqlCeException
There was an error parsing the query. [ Token line number = 1,Token line offset = 43,Token in error = C]
Here is the code I am using
string dsc = Application.StartupPath + "\FCDB07.sdf";
conn = new SqlCeConnection("DataSource = " + dsc);
conn.Open();
cmd = conn.CreateCommand();
cmd.CommandText = "DELETE FROM DataContainer WHERE FileName =" + dgContainers[0, SelRowIndex].Value.ToString();
cmd.ExecuteNonQuery(); //There was an error parsing the query. [ Token line number = 1,Token line offset = 43,Token in error = C ]
conn.Close();
Any Idea on What causes this?
TIA
Trophus
View 3 Replies
View Related
Nov 23, 2007
Hey all-
I'm trying to insert some values into an SQL Compact database on a WM6 device but there is something apparently wrong with my SQL statement...
The program is going to allow users to schedule an SMS message to be sent at a certain date and time. I'm using a database to keep track of the scheduled SMS messages. The database has 3 rows: phone number, message, and the date/time to be sent.
Here is the relevent code:
private void scheduleMenu_Click(object sender, EventArgs e)
{
//connect to DB and do our scheduling magic
string message = messageBox.Text; //should rename messageBox...
string phoneNum = phoneNumBox.Text;
string dataBase = @"Program FilesSMS_Scheduler2SMSDatabase.sdf";
//SqlCeEngine eng = new SqlCeEngine(dataBase);
SqlCeConnection conn = new SqlCeConnection("Data Source=" + dataBase);
conn.Open();
//insert phone number, message text, and date/time into DB
string cmd = "INSERT INTO Scheduler(phoneNum, message, date) VALUES("+ phoneNum + ", "+ message + ", "+ dateTimePicker1.Value +")";
SqlCeCommand cmdPhone = new SqlCeCommand(cmd,conn);
cmdPhone.ExecuteNonQuery(); //error occures here...
messageBox.Text = "";
MessageBox.Show("Message Scheduled!");
}
I'm guessing it doesn't like how I am trying to get the data from the different text boxes and the DateTimePicker to go inside the SQL command. Does anyone have any ideas on how to fix my SQL command or how to get data from a textbox and DateTimePicker to be inserted into a database a different way?
View 3 Replies
View Related
Oct 19, 2006
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
View 3 Replies
View Related
Jan 28, 2008
I do not know how to explain this question.
I have this procedure that does a lot of temp table selecting, some insert into tables, and it the end it gives out a table as a result. The thing is, when i run it through query anayzer, it all goes smoothly. When I run it through code (c#), i get a "System Error" message. Does anyone know why this is so?
(p.s. nocount is off)
Thanx.
View 6 Replies
View Related
Nov 25, 2003
i am not able to connect to sql server.
when i run Net View \servername
i get "system error 5 has occurred. access denied" .
what does this mean? my (client) machine has win 2000 prof. installed and the server machine has win nt server on it
View 2 Replies
View Related
Sep 10, 2007
Hi SQL TEAM
Can someone please assist, we have a Database roughly 10GB in size,
For the past 2 days now we get the following errors.
////////
FCB::Open failed: Could not open file D:MSSQL.1MSSQLDataHelpdesk.mdf for file number 1. OS error: 32(error not found).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
////////
FCB::Open: Operating system error 32(error not found) occurred while creating or opening file 'D:MSSQL.1MSSQLDataHelpdesk.mdf'. Diagnose and correct the operating system error, and retry the operation.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
////////
Can someone tell me what is causing this error?
View 4 Replies
View Related
Jul 23, 2005
Whats happening:Error#: 40002Error Item: 01000: [Microsoft...][ODBC...][SQL...]The Statement hasbeen terminated. > GETID 'INSERT INTO Table(Column1, Column2, Column 3,Column4, Column5, Column6) VALUES("","Value1","Value2","Value3","Value4","Value5")'Error Message: 01000: Microsoft...][ODBC...][SQL...]The statement hasbeen terminated.Active Form: frmFormForm Name:---GETID Stored Procedure:---CREATE PROCEDURE GETID @strsql text ASPRINT cast(@strsql as varchar(4000))EXEC(" "+@strsql + " select @@identity as id")GO---Anyone know what could be causing it? The database has changed - thefrontend code hasn't, so it has to be a database problem. Whathappened was a few tables became incorrect so we restored them from abackup. Everything else seems to work, apart from adding a new recordto this table.You can edit current records etc..just not add.Thanks in advance,
View 1 Replies
View Related
Feb 7, 2008
I have configured the system database backup using SQL Server 2005Maintenance Plan. It was running properly quite some time with in 5 to10 minutes. Suddenly I am getting this error "Process is terminateddue to StackOverflowException. The return value was unknown. Theprocess exit code was -2147023895". And the back up did not completefor 55 minutes and finally it got failed. Somebody good help me outpls.rgsPraveen
View 1 Replies
View Related
Jan 29, 2008
The code below stops as I try to open a connection. I get the following error:
ServerVersion = 'sqlConnection1.ServerVersion' threw an exception of type 'System.InvalidOperationException'
string qry = "";
qry = string.Format("insert into dbo.member(mbrFirstName, mbrLastName, mbrStreetAddress, mbrPostalAddress, mbrTelephoneNumber, mbrTelephoneJob, mbrEmail) values('{0}','{1}','{2}','{3}','{4}','{5}','{6}')", sql1, sql2, sql3, sql4, sql5, sql6, sql7);
cmd.CommandText = qry;
cmd.Connection = sqlConnection1;
sqlConnection1.Open(); //Code stops here!!!
cmd.ExecuteNonQuery();
sqlConnection1.Close();
Does anyone know what is wrong? I appreciate any help!
View 3 Replies
View Related
Dec 18, 2003
I have a DataGrid, it will return a table in SQL2000 server.
the problem is:
no data in the datagird, only a record "null" in all field.
I find a sample is add a "sqlDataAdapter1.Fill".
but if I add the code:
sqlDataAdapter1.Fill(dataSet21);
I got the error:
---------------
An unhandled exception of type 'System.Data.SqlClient.SqlException' occurred in system.data.dll
Additional information: System error.
-------------
I have search this problem fix many many time, many people has this problem, looks like no result I can find.
Please help, thanks very very much.
Thanks.
View 2 Replies
View Related
Oct 5, 2001
Hi
Can we supress the System error messages ?
if yes how ?
for ex. In a table I am adding a row which is voilating primary key constarint ..I do not want system message for that ..
Server: Msg 2627, Level 14, State 1, Line 0
Violation of PRIMARY KEY constraint 'PK_b'. Cannot insert duplicate key in object 'b'.
The statement has been terminated.
I can write a user defined message for this purpose but I am not able to supress system message .
The procedure I am using is
CREATE PROCEDURE add_b
@num int,@empno int, @name varchar(6)
AS
INSERT INTO B (num, empno, ds ) values (@num,@empno,@name)
-- Test the error value.
IF @@ERROR <> 0
BEGIN
-- Return 99 to the calling program to indicate failure.
RAISERROR ('Job id 1 expects the default level of 10.', 16, 1)
PRINT "An error occurred loading the new author information"
RETURN(99)
END
ELSE
BEGIN
-- Return 0 to the calling program to indicate success.
PRINT "The new author information has been loaded"
RETURN(0)
END
GO
Sujit
View 2 Replies
View Related
