Xp_cmdhsell Component Turns Off After The Reboot.
Feb 15, 2008
Whenever Veritas backup update is installed and xp_cmdhsell component is turned off in SQL server 2005 Standard Edition Sp2 after rebooting.
SQL Server blocked access to procedure €™sys.xp_cmdshell€™ of component €˜xp_cmdshell€™ because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of €˜xp_cmdshell€™ by using sp_configure. For more information about enabling €˜xp_cmdshell€™, see €œSurface Area Configuration€? in SQL Server Books Online. [SQLSTATE 42000] (Error 15281). The step failed.
Can anyone explain me why it's happening and Is there any way we can avoid this happening in production server.
Any coments will be highly appreciated.
View 4 Replies
ADVERTISEMENT
Aug 7, 2014
So I have been struggling with a way to perform inventory turn calculations in SQL. I'll start off with the formula. Basically the formula is Cost of Goods Sold over last 12 months / Average Inventory Value over the last 12 months. Short hand as COGS/AvgInventoryValue = Turns
In order to obtain the COGS value I take the Avg(UnitCost) * Sum(InvoicedQty) in the last 12 Months for Sales documents. This is represented as DOCUMENTTYPE = 2
Then divide AvgInventoryValue
To obtain the AvgInventoryValue I need to know the Quantity purchased in the 12 month period * Avg(UnitCost) + QuantityOnHand at the start of the period * Avg(UnitCost)
The purchased documents are represented with DOCUMENTTYPE = 6
The purchases will be positive since we are putting value in. The sales are negative since value is going out. I'll start with a simple example where the product is at zero Quantity On Hand at the beginning of the period.
--CREAT THE TEMP TABLE
create table #VALUEENTRY
(
ITEMNO VARCHAR (50) NOT NULL
, POSTINGDATEDATETIME NOT NULL
, DOCUMENTTYPEINT NOT NULL
[code]....
Is there another approach I should take to obtain the inventory turns?Also how do I account for periods earlier than 12 months where inventory is left over?In the sample data this item happened to be at zero inventory on hand at the start of the period. Also I believe it is my subquery's which are throwing the numbers off but I'm not sure how to isolate the subquery to just perform the result for a specific item. It is aggregating the entire table. How can I make the subquery more specific?
View 3 Replies
View Related
Oct 26, 2007
Hello,
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Please advice.
Thank you.
View 7 Replies
View Related
Jan 23, 2007
Hi,
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
Appreciate a help.
Gulden
View 4 Replies
View Related
Jul 6, 2015
While importing data from Excel source , some column is getting null value even though excel column has value.To Resolve the issue we tried with
HKEY_LOCAL_MACHINESOFTWAREWow6432NodeMicrosoftOffice14.0Access Connectivity EngineEnginesExcel
1.Change the Value of the Row TypeGuessRows from 8 (Default value) to 0 and ImportMixedType = text
• xls
HKEY_LOCAL_MACHINESOFTWAREMicrosoftJet4.0EnginesExcel
1.Change the Value of the Row TypeGuessRows from 8 (Default value) to 0 and ImportMixedType = text
the connection string of the excel
UPPER(REVERSE(SUBSTRING( REVERSE(@[User::VarInputExcelFile]), 1, 5) ) ) == ".XLSX" ? "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + @[User::VarInputExcelFile] + ";Extended Properties="Excel 12.0;HDR=Yes;IMEX=1";":"Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=" + @[User::VarInputExcelFile] + ";Extended Properties="EXCEL 8.0;HDR=Yes;IMEX=1";"
by doing the above setting also , the column is coming as null from excel source even though there is data in excel.
View 2 Replies
View Related
Dec 6, 2006
IF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies
View Related
Mar 16, 2007
In a Data Flow, I have the necessity to use a SSIS variable of type €œObject€? inside Script Component and assign to it the content of 'n' variables of string type.
On exiting from the script the variable of type object should contain something like in the following lines:
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBBBBBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDDDDDDDDDDD
€¦€¦€¦€¦€¦€¦€¦.
€¦€¦€¦€¦€¦€¦€¦.
On exiting from the data flow I will use the variable of type Object in a Script Task, by reading each element in a cyclic fashion.
Is there anyone who have experienced something like this? Could anyone provide any example of that?
Thanks in advance!
View 3 Replies
View Related
Aug 13, 2007
Hi all
I'm into a project which uses a lot of views for joining 2 or more tables. Using the MERGE component in SSIS will be a huge effort coz it only has 2 inputs and I gotta SORT the input too.
Isnt it possible to have a VIEW like component that joins more than 2 tables and DOESNT need sorting??
(I've thought about creating views in database engine but it breaks my data floe in SSIS and is'nt a practical solution)
View 4 Replies
View Related
Mar 30, 2006
I am writing a custom dataflow transformation component and I need to get the name of the preceeding component.
I have been trying to find a way to get a reference to the Package object, MainPipe object or IDTSPath90 object (connecting to the IDTSInput90 of my component) from my component because I think from there I can get to the information I want.
Does anyone have any suggestions?
TIA . . . Ed
View 7 Replies
View Related
Nov 27, 2007
No idea where this bug crept in from. Have been using SSIS for 1.5 years now without hitting this problem.
I had a script component opening an XML document and parsing it using XPATH. I added some code that uses StreamReader / Streamwriter (closing one stream before starting the other). The code works without issue in my C# app.
And it ran without issue 2-3 times in SSIS. Then suddenly after running my package again, the script component says it completes successfully, yet nothing happens. I set a breakpoint on the first line of code - it never hits it. I add a msgbox as the first line of code - and it never displays.
I then close my package / exit out of ssis ... and then re-open it. When i open my script component, all of my code is GONE. All references that I added are gone.
I tried adding the streamreader/writer process to a dll I created from my c# app ... and added the DLL to the package -- same result.
I can reproduce this on 2 different computers.
Anyone experience this problem ? Any idea how to stop it ? Or debug it ?
Here is a slimmed down code sample of what causes the error :
Public Class ScriptMain
Public Sub Main()
Try
Dim xmlDoc As New XmlDocument
xmlDoc.Load("c:ulkasync_86281519_20070628045850225_4.xml")
MsgBox("xmlLoaded") --this doesn't display once the package starts "acting up"
Catch ex As Exception
MsgBox(ex.Message)
UpdateXML("c:ulkasync_86281519_20070628045850225_4.xml", ex.Message)
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub UpdateXML(ByVal fileName As String, ByVal message As String)
Try
Dim invalidChar As String = message.Trim().Substring(message.Trim().IndexOf("0x"), 4)
Dim rd As StreamReader = New StreamReader(fileName)
Dim xml As String = rd.ReadToEnd()
Xml = Xml.Replace(invalidChar, String.Empty)
xml = xml.Replace("", String.Empty)
xml = xml.Replace("<![CDATA[<![CDATA[", "<![CDATA[")
xml = xml.Replace("]]>]]>", "]]>")
MsgBox("replaced")
rd.Close()
Dim wr As StreamWriter = New StreamWriter(fileName)
wr.Write(xml)
wr.Close()
Dim xdoc As XmlDocument = New XmlDocument()
xdoc.Load(fileName)
Catch ex As Exception
UpdateXML(fileName, ex.Message)
End Try
End Sub
End Class
View 4 Replies
View Related
Mar 26, 2002
Our NT person thinks that rebooting the SQL 2000 (on WIn 2000) server every month is a good idea (this is a client production box). I am strongly against it. For starters any trends I am trying to capture with performance monitor become useless every time we do this. I am willing to listen to every one's opinion, but I hope by now that SQL 2000 is stable enough not to have to do this.
View 1 Replies
View Related
Oct 15, 2004
I seem to recall somewhere that a Microsoft Windows Server (2000 for example) should be rebooted once a week.
Is this an urban myth? If so....I can't seem to find a doc on it.
googled:
microsoft server maintenance reboot schedule recommendation
thoughts?
View 2 Replies
View Related
Jan 25, 2006
I'm very new to SQL Server. I need to reboot the server for some reason. I need your help to list out what a the step that I need to follow to perform this process.
Regards,
Ilmi
View 5 Replies
View Related
Aug 22, 2007
After reboot, some db were detached, some not.
How come?
View 3 Replies
View Related
Jul 23, 2005
Hello,I have a server running Windows 2000 Advanced and Sql Server. Thesystems runs fine throughout the day but reboots at night, somtimesmultiple times. The event log has a message that reads "The previoussystem shutdown at X:XX PM was unexpected."Any ideas?Paul
View 3 Replies
View Related
Jul 20, 2005
Hi all,I wanted SQL server to sent me an email when it reboots. I created an Alertbut doesn't seem to be working. Any suggestions.Thanks,
View 1 Replies
View Related
Aug 5, 2004
Hi all, I'm trying to install MSDE in silent mode and without using a .ini file (on a machine with windows 2000 server and SQL 2000 already insatalled).
At the end of the installation, the machine reboot automatically, but I need to stop this reboot.
Someone can help me?
Thanks all
View 2 Replies
View Related
Jul 16, 2004
We have to add some hardware and I was wondering if someone could provide a stepwise tip to do it .
It is a 3 Server Environment Pub/Dist/Sub
All three running under SQL2K
Here is what I am planning.
a. Uncheck the Enable in Distributed Agent for each replication
b. Wait for all replications to complete
c. Shut down Publisher ? Or do I have to do something else before that.
Please explain a little .
Thanks
View 2 Replies
View Related
Apr 28, 2008
Do you guys reboot your SQL 2005 servers at a set schedule? If so, how often are you rebooting the servers?
-A
View 2 Replies
View Related
May 24, 2007
I've just rebooting the db server and I've currently got 82 connections open to the server. vb6 apps connect fine but .Net apps are sruggling - sa is sql200 query analyzer. they can't get a connection to the server - it just hangs for ages. any idea?
View 2 Replies
View Related
Jul 20, 2005
Here is the block of the sproc that I?ve created. All lines executefine except for the ?exec master..xp_cmdshell @reboottc?. In order tomake this work from the query analyzer I had to set the MSSQLSERVERservice to have the same credentials as the thin clients we are tryingto shut down, that means the service is running as an Administrator onthe sql server with the same u/p as administrator on thin clients.declare @RoomNumber varchar(6) -- for testingset @RoomNumber = '1144' -- for testingDECLARE @RoomIP varchar(15), @RebootTCvarchar(120), @shutdownStart varchar(20), @shutdownEnd varchar(85)-- @ShutDownStart and @ShutDownEnd will be usedwith the @RoomIP to build the shutdown command sent to the thinclientsSET @ShutDownStart = 'shutdown -r -f -m \'SET @ShutDownEnd = ' -t 5 -c "MandatoryiConnect Reboot issued during guest check in/out process"'SELECT @RoomIP = IP FROM Rooms WHERERoomNumber = cast(@RoomNumber AS INT)SET @RebootTC = @ShutDownStart + @RoomIP +@ShutDownEnd-- print @RebootTC -- for testing-- @RebootTC ends up looking like the line below based on the@RoomNumber-- shutdown -r -f -m \172.18.16.103 -t 5 -c "Mandatory iConnectReboot issued during guest check in/out process?-- Also the command below runs correctly when executed from SQL QueryAnalyzerEXEC master..xp_cmdshell @RebootTC
View 1 Replies
View Related
Feb 15, 2008
An IT dept. I have been consulting with has started to reboot SQL server every night. They are saying that this is the best practices. I would like to know if anyone has any other ideas on this subject. What is the best practices for how often a SQL server should be rebooted, daily, weekly, monthly ... ?
Thanks
View 9 Replies
View Related
Feb 20, 2007
I just installed SP2. I wanted to install the AdventureWorksDW database as part of the Database Engine Tuning Advisor tutorial. It said my install was not finished and I had a "pending reboot requirement." I shut down, and 8 different updates ran. When I tried to install the AdventureWorksDW database again, I got the same message. I'll see if there are still more updates to run.
View 10 Replies
View Related
Feb 20, 2007
I installed SP1 for SS 2005 on a quasi-production server, which is why I didn't mind rebooting the server. Unfortunately, it's been 5 hours and the server still hasn't rebooted. (I see a gray screen and a pointer, and that's it... but there's still disk access happening. I'm not really sure what it's doing.)
What's the best way to avoid the 5 hour reboot in the future?
Thanks,
Robert
View 3 Replies
View Related
Nov 7, 2002
It takes my server forever to reboot, does anyone know how to fix this or is this a problem with the system or just how it is? Thanks
View 12 Replies
View Related
Jun 30, 2004
Got an issue:
I am running SQL Server 7.0 on a Web server and recently the SQL Server has been acting up. Basically what happens is every time the server is restarted the Service Manager fails to restart. I even get an error telling me that the service failed to start. So, when I log back in I have to physically restart the Service Manager. I have the services set to start automatically. Can anyone direct me where to look...perhaps a SQL Server log that might give me a clue. My application and error logs only tell me that it stops. Any ideas?
View 2 Replies
View Related
May 2, 2004
Hi,
I have transactional replication set up between two dedicated servers. Server A is the PDC and Server B is a BDC (they are both Win2000 boxes). Both the servers are brand new, and replaced the two that were running like clock work (replication wise) for the last 12 months. I never had this problem with the old servers....
When the servers are shut down (as the case was a couple of weeks back with a power failure) or just recently when they were move to another room. Both servers boot up at the same time. Server B (which is the server holding the db being replicated) boots quicker and as a result replication fails and is then 'sucessfully stopped'. Unless I am aware of the server being rebooted and can monitor this potential problem, within 2 days the logfile grows to large and everything comes to a crashing halt.
I just remove replication, truncate and shrink the log, reset replication and we're away.... BUT I really need to know why it is happening in the first place. I figure there must be a setting that I have forgotten about or something.
Both servers are Win2000 (SP4) and SQL2000(SP3a).
Any help would be appreciated.
Thanks
Casper
View 3 Replies
View Related
Feb 28, 2007
is there a way to find out when the sql server was last rebooted (or how long its been up) in tsql or command prompt (which I will take into tsql)
ta
View 7 Replies
View Related
Jul 23, 2005
To All,I have a SQL2KSP3a database(<1GB) running on a 4x3GB physical CPU with4GB of ram. It is Windows Server 2003 with hyper-threading turn on.There are ~420 .Net users/cxns (fat client, no web/app servers) withconnection pooling and ~1 trx/sec. The database growth is neglegeableand actually is not even relevent which I will explain in a minute.99% of the trxs are from one SP that does a select. The resultsets arerelatively small as well 1~100 rows. Yes I have tuned it with indextuning wizard as well, changed the SQL memory configurations, etc....My problem is this...The first day after a reboot, the server runs 6%CPU during peak hours.During the non-peak hours until the next day something apparentlyhappens. The next day (2nd day after a reboot), it jumps to 40%CPUduring peak hours. The server will continue to run at 40%CPU duringpeak hours until the next reboot. This phenomenon has been occurringfor 6 months or more and the traffic on the server is the same for day1 as it is for day 2,3,4,... This database was on another server with100+ dbs and exibited the same behavior, thus bringing that server toits knees, and thus we had to move it to the server in question with noother dbs.I have googled my eyes out, Microsoft site, white papers, perfmon,SQLDiag, PSSDiag, execution plans, index tuning wizard, and the listgoes on! I currently have a case open with Microsoft that has beenopen for months now. I have been passed around to the 3rd "MS TechSpecialist". I have ran PSSDiag a total of 6 times for them for hourson end. I have changed MAXDOP. I could give more information, but Iwould be here for days. I am running out of patience/ideas andMicrosoft is apparently blowing smoke.Any ideas are greatly appreciated!Thanks in advance!JL
View 10 Replies
View Related
Jul 17, 2007
Everytime I reboot my sql server 2000 the guest account on tempdb is gone, but the guest account on master remains.
Can anyone offer my any ideas how I can stop that from happening?
View 4 Replies
View Related
Jun 11, 2007
If I am running SQL Server 2005 in a clustered environment, what is the safest way to restart the SQL server agent? It is currently running but I need to restart it for maintenance purposes.
Is the safeway way to restart is to login to the SQL Server Management Studio as the system administrator, select the SQL Server Agent object, right-mouse click and select "Restart?"
View 2 Replies
View Related
Jun 5, 2007
Hello,
OS: Windows XP Embedded
MSDE: 2000 SP3 to SP4
I want to avoid reboot after upgrading MSDE from SP3 to SP4.
setup.exe seems to no option to avoid reboot.
The resason to avoid reboot is continue to do some process after upgrade MSDE.
Regards,
View 3 Replies
View Related
Jun 17, 2015
I have a few SQL instances on my server (jdjfdijdk)Â
They where called and organized like this:
MyServer - Database1
MyServer/BBserver - Database2
For some reason instance MyServer/BBserver has stopped and I couldn't make it start so I decided to reboot the server. After reboot the MyServer/BBserver was working but when open the other instance MyServer using Management Studio the Database1 disappear and the Database2 can be accessed by MyServer/BBserver and MyServer instances.
Even a backup made of Database1 and stored atÂ
C:Program Files (x86)Microsoft SQL ServerMSSQL.2MSSQLBackup vanished.
How to recover Database1?
View 19 Replies
View Related
