hi,
does anybody know how to enable/disable xp_cmdshell in sql server
2000.
i our server this sp has been disbaled for security puropse.but i need
to use it in a job.so please can any body guide me?
thanks for the help.
-Shark.
Hi allI have a stored procedure that has the lineEXEC master..xp_cmdshell 'dtsrun /Stestjob1 /N testdts /E'If I run the SP from an access front end as a trusted user or from ascheduled job it runs fine and exectues the dts.If I run the stored procedure using VB6 as a standard connection the dtsjobwont run. I get back Execute permissions denied on xp_cmd.. on databasemasterdb_connect_string = "Provider=SQLOLEDB.1;Persist Security Info=False;UserID=test_connect;PWD=pw1test;Initial Catalog=testdb;Data Source=" &database_name....Set cmd = New ADODB.Commandcmd.ActiveConnection = db_connect_stringcmd.CommandType = adCmdStoredProccmd.CommandText = "testStoredProcedure"cmd.ExecuteDo I need to give test_connect permisions to run the test stored procedure.I hoped that because the VB called a stored procedure and the connection hadpermissions to execute the SP then it would be the SP that called thexp_command....can anyone tell me the accepted way to do thismany thanksAndy
View 2 Replies View RelatedI have a trigger that should be execute on each row insert and only ifappcode = 'I' and datasent = 0. It should execute a DTS package. TheDTS package by itself runs about 6 seconds. Trigger was createdsuccessfuly. When I try to insert a row my db hangs. I can see thatSPID on my db is hang by SPID from master db. It doesn't completeuntil I kill that SPID. Why is that?This is the trigger that I am trying to execute:CREATE TRIGGER myExportON ruExportFOR INSERTASdeclare @appcode varchar (10)select @appcode = appcode from ruexport where appcode = 'I' anddatesent = 0if @appcode = 'I'exec master..xp_cmdshell 'DTSRun /S "KOCL384017SQL" /N "Sys_Export" /G"{17D112A8-413E-420F-A624-3790BDFBED9F}" /W "0" /E'goAny suggestions?
View 2 Replies View RelatedHi,
I'm just moving over one of our databases from SQL2000 to 2005. Everything is working fine, and all web sites are working, however I just can't seem to get xp_cmdshell to function on the 2005 server.
I have enabled xp_cmdshell, and when I run a stored procedure, which writes the contents of one column to a text file, it says "invalid object name". This table is definitely there, and is actually updated earlier on in the same SP, so permissions for that are fine.
This is the line causing the problem (if I take it out, the rest of the SP works no problems):
--write the text file
EXEC master.sys.xp_cmdshell 'bcp "SELECT newslettertext FROM mydatabase.dbo.newsletters" queryout D:ewslettertext extbody.txt -U -P -c'
Error = [Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'mydatabase.dbo.newsletters'.
SQLState = 37000, NativeError = 8180
Error = [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared.
NULL
Could it be to do with permissions on the master.sys.xp_cmdshell? If so, wouldn't it give me a "permission denied" error?
Any help would be greatly appreciated!
Thanks
I am trying to issue an xp_cmdshell command via a guest account. I have given the guest user in the master db exec rights, and when I do something simple like
execute xp_cmdshell 'dir c:'
I just get the reply that the command completed without any returned data. However when I am on as 'sa' I get the results back as expected.
Any ideas anyone!
And can I send an argument with the command in the commandline.
Thanks in advance from a student in Norway
I have an external program which runs by the xp_cmdshell. This program get data from serial port and then store it back to the database (directly, by JDBC) It seems to me that when xp_cmdshell is running a program, the whole SQL server stop responding to any other request. (Is this normal?) Anyways, I insert a record into a table and this triggers an external program to run. But then the whole SQL server is hold at that stage. Logins are ok but no SQL or T-SQL commands are accepted. It seems to me like the SQL server (xp_cmdshell in specific) is waiting for the external program to terminate but the external program is waiting for the server is be ready to accept data. They are both waiting for each other. Any suggestions here?
View 3 Replies View Relatedhow i can clear sql server logs by run xp_cmdshell stored procedure.
(my user in sql server is a admin).
i don't want use enterprise manager . i want write a query and use at xp_cmdshell .
befor thx.
Hi,
I have to named instances on one server. I'd like to use xp_cmdshell for some interfaces.
I've "activated" the xp_cmdshell feature. I set a proxy account und and gave the sql user the right to exec xp_cmdshell.
Unfortunately the command
EXEC sp_xp_cmdshell_proxy_account 'DOMAINproxyaccount','APassword'
throws following error:
Msg 15121, Level 16, State 200, Procedure xp_cmdshell, Line 1
An error occurred during the execution of xp_cmdshell. A call to 'LogonUserW' failed with error code: '1326'.
... and yes, the username and password should be valid ;-)
When I exec (makes no sense, I now...)
EXEC xp_cmdshell 'echo 123'
The following error occurs:
Msg 15121, Level 16, State 200, Procedure xp_cmdshell, Line 1
An error occurred during the execution of xp_cmdshell. A call to 'LogonUserW' failed with error code: '1326'.
Has anyone of you an idea?
Thank you very much, Frederik
SQL Server 2005: Microsoft SQL Server Enterprise Edition (64-bit)
Microsoft Windows NT 5.2 (3790)
SQL Version 9.00.3175.00
I have 2 identical servers... one for DEV and one for TEST. On the DEV server, I can use xp_cmsdhell to execute "administrative commands" such as NET SHARE and AT. On the identically configured TEST server, I can not. Those command return the "System error 5 has occurred. Access is denied" error. I CAN run other commands via xp_cmdshell (DIR, NET USE, etc.). This is true regardless of the account I connect as.
The SQL Server service accounts in both instances are domain accounts belonging to the local admin group.
I "know" that I ran across this when setting up the DEV server and am "fairly sure" I found a reference to a known problem with 2005's xp_cmdshell and administrative commands. But for the life of me I can not now find any such reference, nor can I find any differences between the DEV and TEST servers in the area of users, groups, policies, or anything else security-related. (99.9% of the internet searches I do end up being about either enabling xp_cmdshell -- done -- or setting up an xp_cmdshell proxy account -- not needed).
Any input is greatly appreciated.
Thanks!
-dave
I am using XP_CMDSHELL to run 2 Windows commands (from a SQL 2005 SP2 server) that access files on a remote server (called webserver). The two commands are:
1. cscript.exe \webserverwwwrootEur_SaveProductImages.vbs
2. dir \webserverwwwroot
Up until very recently this worked fine. Now I am getting Access Is Denied errors:
For #1:
Microsoft (R) Windows Script Host Version 5.6
Copyright (C) Microsoft Corporation 1996-2001. All rights reserved.
CScript Error: Loading script "\webserverwwwrootEur_SaveProductImages.vbs" failed (Access is denied. ).
For #2:
Access is denied.
This happens if the above commands are run through a job, or directly with Query Analyzer as SA.
I understand that XP_CMDSHELL commands are run in the security context of the SQL Server startup account. The SQL Server startup account is called SQLServer and this account exists on both webserver and the database server. On both servers the username & password are identical and the user is in the local Administrators group. The two servers are in a workgroup.
Things I have tried (with no effect):
1. Restarted the servers
2. Deleted and recreated the SQLServer login on both servers
3. Changed the startup account for SQL Server through the SQL Server Configuration Manager to another account and back to SQLServer.
The most revealing tests are these:
1. If I log into the database server myself using the SQLServer account I can run the above commands in a Command Prompt with no problem
2. I installed SQL 2005 Express SP2 on webserver using the same startup account (SQLServer). If I run the same XP_CMDSHELL commands as above but accessing files on the database server, the commands work!
So, an XP_CMDSHELL command run under SQL Express using the local SQLServer account to access a remote server works, but an XP_CMDSHELL command run under SQL Server using a local SQLServer account (that is supposedly identical to the same named account on the other server) does not work !!?!?!?
It is almost as if XP_CMDSHELL commands run under SQL Server are NOT using the SQLServer startup account, but using some other weaker account. How can I tell if this is true?
How can I get this back working (as it was a week ago). The only thing I can think that happened on the servers to cause this is the installation of Windows Updates.
Thanks
How to write errors in event log of machine from SQL Server through XP_Cmdshell
View 1 Replies View RelatedI am using the xp_cmdshell to run a batch file that is trying to open the Adobe Acrobat Reader.
When I run the batch file in the command prompt, it opens perfectly.
When I run it in SQL with xp_cmdshell, it returns the contents fine, and I notice it tries to open Acrobat, but it is under the username "system". And I cannot get it to load in a visible area, and for some reason it doesnt seem to load properly under system.
Any ideas? Any Suggestions?
Please advise.
Marco
Hello, i have a question that the sql server 2000 is install in window 2000 server. If i want to update to window 2003. Is that any problem in sql server 2000. I am worry about whether we will have problem after update. What i need to do? Many thanks.
View 5 Replies View RelatedHi All,
I would like to know, how the datetime will be stored in the sqlserver datetime column.
Because some time i am giving the date in dd/mm/yyyy and sometime mm/dd/yyyy.
while give the date in mm/dd/yyyy works fine but not in the another case. and also while i execute a query on query analyser it shows the datetime in
yyyy/mm/dd format.
So anyone can please tell me how the dates will be stored in the datetime column of sqlserver database?
Thanks in Advance.
Regards,
Dhanasekaran. G
I am currently running SQL Server 2000 Standard on my production system, and I am looking to upgrade the system to Windows 2000 Adv. Server. I would also like to upgrade SQL Server 2000 Standard to SQL Server 2000 Enterprise to utilize more than 2GB of memory. Can anyone tell me what is the best way to upgrade the system, and please provide some feedback on your experiences with the upgrade. Thanks in advance.
View 2 Replies View RelatedWe are experiencing a problem with Sql Server 2000 linking to anAccess 97 file. We have two machines that link to this .mdb file, andwe recently upgraded one to newer hardware, SP3a, MDAC 2.8, etc. Thelink on this upgraded machine no longer works, giving this message:Server: Msg 7399, Level 16, State 1, Line 1OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error.[OLE/DB provider returned message: Cannot open a database created witha previous version of your application.]OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0'IDBInitialize::Initialize returned 0x80004005: ].The link on the older machine still works. We decided to tryconverting a copy of the file to Access 2000 to see if the newerpatches/drivers/whatever no longer supported 97. We set up a link onboth machines to this file, and they both work. However, on theupgraded machine, the following error is receievedServer: Msg 7399, Level 16, State 1, Line 1OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error.[OLE/DB provider returned message: System resource exceeded.]OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0'ICommandText::Execute returned 0x80004005: ].when making 1-3 connections to the the linked server, while the oldermachine supports at least 7 simultaneous queries connecting to thelinked server and still hasn't produced that error.Does anyone have any idea if there is a known issue with linking toAccess 97/2000 files under MDAC 2.8, Jet 4.0, etc? Any light anyonecan shine on this subject would be greatly appreciated.
View 1 Replies View RelatedWhat is the limitation of memory that SQL Server 2000 Standard can usewhen running on a Windows 2000 Advanced Server platform?
View 1 Replies View RelatedHi, I need to know if somebody knows like making the update of Standard SQL 2000 to Enterprise. Greetings.
View 3 Replies View RelatedThanks in advance. What is maximum SQL Server database (*.mdf) file size with SQL Server 2000 as part of Microsoft Small Business Server 2000? (Database files were limited to 10 GB in SBS 4.5 with SQLServer 7.0... has this changed?).
View 1 Replies View RelatedCan you install Sql Server 2000 Developer Edition with MSDE 2000 release A already installed?
View 2 Replies View RelatedMy objective is to use Enterprise Manager to move (copy) my SQL db from the server to my windows desktop computer.
I downloaded MSDE and am having trouble installing it, no doubt because I do not understand the documentaion (ReadMeMSDE2000A.htm).
When I try to run setup, I get that message that says:
"A strong SA password is required for security reasons. Please use SAPWD switch to supply the same."
Considering my purpose, do I need a "strong" SA password? If not, how do I get around it? If yes, how do I set it up?
I am a Mac user so I have poor windows skills, please make it as painless as possible for me, thanks!
Ron
venu writes "Hi,
Am very new to MS SQL adminstration
Can anybody help me out how to work on Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A just for the practice.
The activity which am going to workout on MSDE is below.
How to install SQL(on XP)
How the layout will be(like if i insall MSDE what are all Application will be and how they depends on each other)
How to create/delete tables if so, how can we do it either by GUI or CUI
just i need a clarifications reg same
Thank you,
venu"
Hi,Simple question: A customer has an application using Access 2000frontend and SQL Server 2000 backend. Data connection is over ODBC.There are almost 250 concurrent users and is growing. Have theysqueezed everything out of Access? Should the move to a VB.Net frontendtaken place ages ago?CheersMike
View 4 Replies View RelatedHi,
Just upgraded some development desktops to Vista Business. However we need
to still connect to some older remote windows 2000/SQL 2000 servers.
Trying to setup an ODBC system DSN on our Vista Business local desktop we get the
following errors -
-START ERROR WINDOW-
Connection Failed:
SQLState: '01000'
SQL Server Error: 772
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen
(SECDoClientHandshake()0.
Connection failed:
SQLState: '08001'
SQL Server Error: 18
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SSL Security Error
-END ERROR WINDOW-
Any help greatly appreciated as this is stopping us from making
database/table connections etc. We've checked the firewall setup and all is well there.
PS - we can still connect fine using XP or windows 2000 desktops and their
local DSNs.
Parameter
Access 2000/XP
SQL Server 7.0
SQL Server 2000
MSDE 2000
Number of instances per server
n/a
n/a
16
16
Number of databases per instance / server
n/a
32,767
32,767
32,767
Number of objects per database
32,768
2,147,483,647
2,147,483,647
2,147,483,647
Number of users per database
n/a
16,379
16,379
16,379
Number of roles per database
n/a
16,367
16,367
16,367
Overall size of database (excluding logs)
2 GB
1,048,516 TB
1,048,516 TB
2 GB
Number of columns per table
255
1024
1024
1024
Number of rows per table
limited by storage
limited by storage
limited by storage
limited by storage
Number of bytes per row
(Excluding TEXT/MEMO/IMAGE/OLE)
2 KB
8 KB
8 KB
8 KB
Number of columns per query
255
4,096
4,096
4,096
Number of tables per query
32
256
256
256
Size of procedure / query
64 KB
250 MB
250 MB
250 MB
Number of input params per procedure / query
199
1,024
2,100
2,100
Size of SQL statement / batch
64 KB
64 KB
64 KB
64 KB
Depth of subquery nesting
50
32
32
32
Number of indexes per table
32
250 (1 clustered)
250 (1 clustered)
250 (1 clustered)
Number of columns per index
10
16
16
16
Number of characters per object name
64
128
128
128
Number of concurrent user connections
255
32,767
32,767
5
Hi, I am trying to edit some data from a SQL2000-datasource in ASP.NET 2.0 and have a problem with a column that has bit-data and is used for selection. SQL2005 works fine when declaring <SelectParameters> <asp:Parameter DefaultValue="TRUE" Name="APL" Type="boolean" /> </SelectParameters>When running this code with SQL2000, there are no error-msgs, but after editing a record the "APL"-column looses its value of 1 and is set to 0. Looks like an issue with type-conversion, we've hit incompatibilities between SQL200 and 2005 with bit/boolean several times before. So, how is this done correctly with SQL2000? (I've tried setting the Type to "int16" -> err. Also setting Defval="1" gave an err) ThanksMichael
View 2 Replies View RelatedI've created a small company database where the tables reside in a SQLServer database. I'm using Access 2000 forms for a front end.I've got a System DSN set-up to SQL Server and am using links withinAccess 2000 to get to the SQL Server tables.My forms worked fine until I made a few minor changes to the databaseschema on SQL Server (e.g. added a foreign key, or added a column).After that, all the links break - I click on a table link and get anerror msg like "invalid object name."Deleting the links after a schema change and re-adding the links seemedto fix the problem. The forms I'd already created seemed to work fineafter re-creating the links.But then I got more advanced with my forms. I have it set up so thatfor certain entry fields, the combobox gets populated with values froma table (the description appears in the drop-down and the correspondingprimary key value gets populated in the table). I created a number offorms using this technique, entered data, and everything worked fine.Made a small schema change and it broke everything -- not the actualtable links, but the functionality for the drop-downs. My values nolonger appeared, and this was true for forms that accessed tables whoseschemas did not change.This is driving me nuts. Is there any way to keep my forms frombreaking each time I make a small schema change?Thanks.- Dana
View 5 Replies View RelatedHello,I received the error message below when i'm trying to install SQLServer 2000 standard edition into a Windows 2000 Professionaleworkstation.Error :Microsoft SQL server 2000 Standard Edition server components is notsupported on this operating system. Only client components will beavailable for installation.Any request modification ?Best regards,Thanks
View 1 Replies View RelatedI've just started getting this EXCEPTION_ACCESS_VIOLATION (0xc0000005) on machines using Windows 2000 sp4 connecting to SQLServer. This is crashing JVMs (multiple Sun versions and BEA also) in the Java VM frame (outside our code). This has just started recently - perhaps with the last set of patches? Has anyone else seen this or know what I could do to get more information? Could this be related to updates to named pipes?
Thanks!
-Brian Temple
Hi,
I worked on a project in ASP.NET using SQL server 2000 as the back end. Its a conversion application that I rewrote in ASP.NET using C#. I need to import the old data in Access db into SQL server 2000 and I have very little knowledge about doing it. The data in not a direct one -one transformation. There are considerable changes to the Database design and data types. Any help and suggestions wud be really helpful. Also, any article links wud be great.
Thanks
We have a SQL Server 7.0 system in NT 4.0 environment. We upgraded our users to Access 2000 and started to work with this. Now we installed a new
server which is Windows 2000 based and the domain is different from
the SQL servers domain. We then installed Access 2000 on Windows 2000
to use with terminal server. But I noticed that there was a problem
with the program. I then looked at the program which was written on Access 2000 and saw that the tables and views can't be seen. The program runs but
I can't see the views and tables. Another thing is access disconects from SQL Server when I want to see the tables. So what can be the problem.
In one part there is an Access 2000 on Windows 2000 server. On the other part SQL Server 7.0 on Windows NT 4.0. And Access can't see the tables in SQL server.
I have a public mailbox that gets information mailed to it (in a pre-determined format).
Is there a way for that info to be put into a table in SQL Server without any user interaction (something running on the exchange server)?
I hope I've given enough info.
Thanks for any and all help!
Ron