Xp_sendmail, ODBC Issues. Thanks For The Previous Help.
Jul 2, 2002
Send Mail works fine when I just want to send a message. However, when I try to send the results from a query as an attachment, I get a ODBC error. Here is example of the code and the error code that I recieve.
Use MyDatabase
go
exec master.dbo.xp_sendmail 'Doe,John',
@query = 'Select * from tblMyTable',
@subject = 'SQL Server Report',
@message = 'The contents of the tblMyTable:',
@attach_results = 'TRUE', @width = 250
go
Send Mail works fine when I just want to send a message. However, when I try to send the results from a query as an attachment, I get a ODBC error. Here is example of the code and the error code that I recieve.
Use MyDatabase go exec master.dbo.xp_sendmail 'Doe,John', @query = 'Select * from tblMyTable', @subject = 'SQL Server Report', @message = 'The contents of the tblMyTable:', @attach_results = 'TRUE', @width = 250 go
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated) Version 11.0.50727.1 RTMREL Microsoft .NET Framework Version 4.5.51650
SQL Server Integration Services Microsoft SQL Server Integration Services Designer Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated) Version 11.0.50727.1 RTMREL Microsoft .NET Framework Version 4.5.50938
SQL Server Integration Services Microsoft SQL Server Integration Services Designer Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
I apologize if this is not the correct forum for this posting. Looking at the descriptions, it appeared to be the best choice.
I am running Windows XP Pro SP2. I have installed the SQL Native Client for XP. However, when I try to add a new data source through ODBC Connection Manager, SQL Native Client is not listed as an option. I have followed this procedure on three other systems with no problems. What would be causing the SQL Native Client to not show up in the list of available ODBC data sources?
Hi all,I am having trouble getting linked Oracle 9 server in MS SQL Server2005 Express to work properly. My machine is running Windows XP.The Microsoft and Oracle OLE DB Providers have problems dealing withOracle's Numeric Data Type, so I decided to use Microsoft's OLE DB forODBC Provider and an Oracle ODBC source. When using the Microsoft ODBCfor Oracle Driver in my ODBC source I have inconsistent behavior.Sometimes my queries are processed properly, then other times I get thefollowing errorOLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC driver for Oracle][Oracle]".Msg 7303, Level 16, State 1, Line 1Cannot initialize the data source object of OLE DB provider "MSDASQL"for linked server "ODBCBEAST".I have no idea why sometimes I can connect to the linked server with noproblems andwhy other times it performs like this. I'm not changing anything aboutthe system I can think of. When I use an Oracle client (PL/SQL) I haveabsolutely no problems connecting. TNSPING returns that the connectionis good.This is unacceptable so I decided to try my luck with the Oracle 10gODBC driver. However when I use this and perform an openquery selectagainst the linked server I get back only 11 rows, when I know that thedatabase has over 100 rows (in fact when using the Microsoft ODBCdriver and it works that's what I get). I figured maybe the buffersetting needed to be raised in the ODBC configuration so I took it from64000 to 600000 (a magnitude of 10) but I still get back only 11 rows.I'm at my wit's end.Any suggestions on resolving one or the other problem would be muchappreciated.Thanks much
I am trying to use xp_sendmail with no luck. My SQL mail works fine and I am logged in as sa. Here is the csript that I am using. The script works on my local box(which is running Win 2K Advanced Server and SQL 7). It will not work on my production boxes. Any suggestions?
I am using xp_sendmail in a stored procedure.I need to update the fields after the mail sent. Is there a way to capture the errors or server messages that occurs. I am using the following code.....
If @send_Mail=0 Begin update MasterleadPool/*Updates the MasterleadPool table once the mail sent */ Set EmailSent='Y', Dateout=getdate() where AssToID=@AssToID and EmailSent='N' and AssToFlag='Y' End
I used @@error to capture the error but it does'nt work. I got server message as follows.... So the problem is it should'nt go to update statement if there is any type of errors in sending a mail..
Server: Msg 17903, Level 18, State 1, Line 0 MAPI login failure.
However in doing this, it never works (go figure or I wouldn't be submitting this). I have defined the variable @EMAIL_ADDRESS_LNK appropriately to reference a field in a table and I'm positive that the value in the field is valid.
What am I missing? If this is not possible, is there a workaround. Thanks in advance for any assistance you can provide.
How robust is xp_sendmail? I would like to roll thru 10 - 20 thousand records, strip the email and send a newsletter...
I'm a definite newby when it comes to mail servers (and how they interact with SQL Server 7.0)...so I'm not sure whether this type of processing would crash/stall the server.
can xp_sendmail handle this type of processing?
I appreciate your help,
p.s. can u point me to any good articles on the subject?
I have a query that works on its own, however when I put it into xp_sendmail it fails. It appears that the "set" command does not work. Here is the query. Any suggestions? Can you use variables within xp_sendmail @ query section?
EXEC master.dbo.xp_sendmail @recipients = 'Richard Peoples', @subject = 'The following Budget Checked items need attention.', @query ='DECLARE @A1 CHAR (20) DECLARE @A2 CHAR (2) SET @A1 = 'Yvette Palomo' SET @A2 = 'N' IF (select COUNT (*) from FSPROD75.dbo.PS_C_JRNLLN_BUDCHK where RETURN_TO_ANALYST = @A1 AND BUDGET_CHECK_CLEAR= @A2) > 0 begin select A.JOURNAL_ID, A.PROJECT_ID, A.ACCOUNT, B.XLATLONGNAME from FSPROD75.dbo.PS_C_JRNLLN_BUDCHK A INNER JOIN FSPROD75.dbo.XLATTABLE B ON A.BCM_LINE_STATUS = B.FIELDVALUE where (((A.RETURN_TO_ANALYST)= @A1) AND ((A.BUDGET_CHECK_CLEAR)=@A2)) AND (B.FIELDNAME = "BCM_LINE_STATUS") end'
I'm using XP_Sendmail on an NT Server and it works fine. We have a new Windows 2000 server, which the SQL Mail has been set up correctly, and the test passes.
When I use execute xp_sendmail in the query analyzer on the 2000 server, it just sits there and processes for over an hour, without any error messages.
select @MB_Free = MB_Free from #FreeSpace where Drive = 'J'
if @MB_Free < 550 exec master.dbo.xp_sendmail @recipients = 'test@yahoo.com', @message = 'Running low on free space'
I can run it as a job step. However, the problem is that we don't have Microsoft Outlook to run xp_sendmail proc to get notify when the free space on the drive is low. I can run mailsend which is os command and add that as a job step. But I don't know how to combine the code above and mailsend, since one is the t-sql and the other one is command script. Any help is appreciated.
I have recently added columns to a table that is part of a xp_send mail script. meaning i run a query off of the table that had the columns added. I am now getting the error: failed with operating system error 32
I have no idea what this means. This is a copy of the script. exec xp_sendmail 'dionne, jim;eddens, david;Wiggs, Alexander;Miller, Debbie;conmdi', '(scrbbususcnc01) Failure 322 Load', @Attachments = '322Error.txt;\scrbbususcnc01archive322msg322M SG.txt;', @query = 'Use [maersk data warehouse] create table #Duplicate_Records (Equipment_Number varchar(10) ,Activity_Date varchar(6) ,Activity_Time varchar(4) ,Sighting_Code varchar(2) ,CountOfEquipment_Number int) insert into #Duplicate_Records SELECT STG_INTERMODAL_322MSG_TBL.Equipment_Number, STG_INTERMODAL_322MSG_TBL.Activity_Date, STG_INTERMODAL_322MSG_TBL.Activity_Time, STG_INTERMODAL_322MSG_TBL.Sighting_Code, Count(STG_INTERMODAL_322MSG_TBL.Equipment_Number) AS CountOfEquipment_Number FROM STG_INTERMODAL_322MSG_TBL GROUP BY STG_INTERMODAL_322MSG_TBL.Equipment_Number, STG_INTERMODAL_322MSG_TBL.Activity_Date, STG_INTERMODAL_322MSG_TBL.Activity_Time, STG_INTERMODAL_322MSG_TBL.Sighting_Code HAVING (((Count(STG_INTERMODAL_322MSG_TBL.Equipment_Numbe r))>1))
insert into #None SELECT DISTINCT STG_INTERMODAL_322MSG_TBL.* FROM [#Duplicate_Records] INNER JOIN STG_INTERMODAL_322MSG_TBL ON ([#Duplicate_Records].Sighting_Code = STG_INTERMODAL_322MSG_TBL.Sighting_Code) AND ([#Duplicate_Records].Activity_Time = STG_INTERMODAL_322MSG_TBL.Activity_Time) AND ([#Duplicate_Records].Activity_Date = STG_INTERMODAL_322MSG_TBL.Activity_Date) AND ([#Duplicate_Records].Equipment_Number = STG_INTERMODAL_322MSG_TBL.Equipment_Number) ORDER BY STG_INTERMODAL_322MSG_TBL.Equipment_Number, STG_INTERMODAL_322MSG_TBL.Activity_Date, STG_INTERMODAL_322MSG_TBL.Activity_Time, STG_INTERMODAL_322MSG_TBL.Sighting_Code;
create table #Real (Equipment_Number varchar(10) ,Activity_Date varchar(6) ,Activity_Time varchar(4) ,Sighting_Code varchar(2) ,CountOfEquipment_Number int) insert into #Real SELECT [#None].Equipment_Number, [#None].Activity_Date, [#None].Activity_Time, [#None].Sighting_Code, Count([#None].Equipment_Number) AS CountOfEquipment_Number FROM [#None] GROUP BY [#None].Equipment_Number, [#None].Activity_Date, [#None].Activity_Time, [#None].Sighting_Code HAVING (((Count([#None].Equipment_Number))>1));
SELECT STG_INTERMODAL_322MSG_TBL.* FROM [#Real] INNER JOIN STG_INTERMODAL_322MSG_TBL ON ([#Real].Equipment_Number = STG_INTERMODAL_322MSG_TBL.Equipment_Number) AND ([#Real].Activity_Date = STG_INTERMODAL_322MSG_TBL.Activity_Date) AND ([#Real].Activity_Time = STG_INTERMODAL_322MSG_TBL.Activity_Time) AND ([#Real].Sighting_Code = STG_INTERMODAL_322MSG_TBL.Sighting_Code) ORDER BY STG_INTERMODAL_322MSG_TBL.Equipment_Number, STG_INTERMODAL_322MSG_TBL.Activity_Date, STG_INTERMODAL_322MSG_TBL.Activity_Time, STG_INTERMODAL_322MSG_TBL.Sighting_Code;
drop table #Duplicate_Records drop table #None drop table #Real', @subject = '(scrbbususcnc01) Failure 322 Load' , @Attach_Results = true, @width = 3000, @Separator = '|'
it gives error saying that @table_var must be declared. even if i use temporary table, the message i get is "cannot reference object in tempdb database."
I want to send a reslut as a xls file. so I did it throug BCP. The same time i need to send file in mail. Here i am stucked. Could any one please advise me to solve this problem?
when creating a sp in SQL 2K that uses xp_sendmail i get a messagesaying:Cannot add rows to sysdepends for the current stored procedure becauseit depends on the missing object 'xp_sendmail'. The stored procedurewill still be created.does this mean that only dependencies involving xp_sendmail will notbe stored? the other dependencies appear to be fine. i'm not surewhy sql would even bother telling me this info. thoughts?
I migrated dts pckg into ssis . In that pckg i have one activex script for xp_sendmail. exec maseter xp_sendmail, @recipients='abc@gmail.com', @query=@sqlsrd, @subject='member load validation', @attach_results=true,@width=250
above code run in ssis or i have to change if i have to chang then tell me where should i have to change.
I'm using SQL 2000 and would like to send a generated email using this stored procedure: select Libraryrequest.LoanRequestID, Titles.Title, requestors.fname+ ' ' + requestors.lname as [Name], libraryrequest.requestdate,libraryrequest.shipdate,libraryrequest.duedatefrom libraryrequestjoin requestors on requestors.requestorid=libraryrequest.requestoridjoin Titles on Titles.Titleid = Libraryrequest.titleidwhere duedate < DATEADD(day, DATEDIFF(day, '20010101', CURRENT_TIMESTAMP), '20010101') I know I need to go to Management, SQL Server Agent, Jobs, New Job. Do I put the stored procedure in the descriptions part? After that I'm lost what do I do.
When excuting the xp_sendmail in the Query analyzer, my mail gets send. When doing this in my code it doesn't work eventhough I explicitly use startmailn then xp_sendmail and then sp_stopmail? I think this is a problem of user rights? I gave my user as parameter but even then it didn't work. Any suggestions? I'm pretty sure, the used code is correct.
