Xp_sendmail @subject Appears In Body
Nov 12, 2004My @subject in an xp_sendmail job is appearing in the email subject where it's supposed to, but also as the first line of the body. Does anyone know of a way to disable this behavior?
View 3 Replies
ADVERTISEMENT
Sending File Contents In The Body Of The Email With Xp_sendmail
Jul 23, 2005I would like to send the contents of a file using xp_sendmail howeverI do not want the file contents to be an attachment.I have no problem sending the file as an attachement.Can anybody give me an xp_sendmail example of how to do this.The results of a query can easily appear in the body of the email butall myattempts to include the contents of a file in the body of the emailhave not worked.TIA
View 1 Replies View RelatedXp_sendmail Problem - Body Message Breaking Onto New Line..
Sep 13, 2005Created a SP that uses system function XP_SENDMAIL. I wantto be able to send a HYPERLINK in the email. TheHYPERLINK is created dynamically and generally long in length (exceedsdefault width of 80 characters) and when rendered in the email is splitacross 2 lines. The problem is that when you click on the link itdisregards the part of the link that has been split onto the linebelow.Does anyone know a solution to this - how to extend the width of theemail to wider that 80 characters so that the link is not split over 2lines? I know that you can use the @width parameter when placing themessage in an attatchment, however I want the link to be placed in thebody of the email and not in an attachment.Any help is much appreciated..
View 2 Replies View RelatedYou Must Enter A Subject
Oct 8, 2004Question: Why is Graz a moderator on this forum? And on nothing else?
Brett
8-)
SQL-CLR - Is It A Dead Subject?
Feb 15, 2008Microsoft products that are doing well tend to have very strong communities around them, and I am starting to get a bit disappointed with SQL-CLR. This forum seems fairly light, the links int he FAQ are broken, and the official SQL-CLR blog has no update since 2006..
Taking all of that into account I am forced to wonder, Is this a dead subject?
I am not trying to say that the people in this forum are doing something wrong, nor am i claiming that no one uses SQL-CLR (i am a user, thats why im here). But I did want to get the opinion of the group here of where they think this concept stands.
I think SQL-CLR can really be a good tool in the chest for various scenarios. I am for one using it to have a generic SQL-CLR Stored Procedure that can analyze small sets of data and move it into various buckets depending on validation rules built into the code. So far its working very well, but I admit it has not yet hit production so only time will tell. (Performance is always a concern of mine)
Regards,
Dmitry.
http://blog.lyalin.com
How To Use Variables In Subject Line
Mar 13, 2008I would like to include some information in the subject line of a report subscription email. Right now the default subject line is something like "@ReportName was executed at @ExecutionTime". is there a way to use one of my report parameters in the subject? I tried something like "Thank you for your order @OrderNum", but that did not work.
Thanks,
Stuart Fox
Automatic Email Subject
Sep 24, 2007
Good Morning,
I have created a varible in a report which displays as a text box i.e contains data like "LWD Apps 450" where the value will change each day. The report is emiled to a list of users, is there a way to automatically enter this value so that it is in the subject bar when the email is automatically sent??
Thanks in advance.
Steve
Subject: Legal Question: Decompiling A DLL ?
Oct 11, 2007Hey guys, I didn't know exactly where to post this, but I'm wondering what
the legal implications of decompiling a .DLL are ?
We are using SQL Reporting Services 2005 with the Excel Export option. The
problem is that our reports have a lot of hyperlinks on each page so we can
easly navigate all the reports, but when we go ahead and export the report,
all the hyperlinks get exported too; resulting in a file atleast 10x the size.
i.e we export a report and it results in a 20mb excel file, but once we
remove all the hyper links and save it again it drops down to a 500k file.
So I was wondering, what the legality was in decompiling the Excel
Export.DLL that comes with Reporting Services and removing the Hyperlink
export functionality ?
Thanks,
Raul
RMO ERROR : No Signature Was Present In The Subject.
Jun 7, 2007Hi !
I have such a message after trying to do replication with SQL Server 2005 using custom Business Logic Handler for a Merge Article (RMO Programming).
Message Replication-Replication Merge Subsystem: agent 'job' failed. No signature was present in the subject.
I am using C# with RMO, merge replication.
Any ideas ? How to solve this problem ?
Thanks.
Pass Paramenter In Subject Of Subscription Email
Sep 29, 2007Hello there,
how can i pass my own parameter values in the subject of Subscription email?.for example i want to pass the employee ID in the subject.
@ExecutionTime Date Format On Email Subject
Jul 4, 2007Hi,
I created a report subscription windows form to talk to SSRS 2000 web services API. Everything is fine except the email subject '@ReportName was executed at @ExecutionTime' is always in American Date format.
Is there a way to customize the date format on the variable @ExecutionTime on the email subject?
Any help would be appriciated.
Thanks,
A
Subject: How To Join A Table With Other (result) Tables ? Complex !
Aug 25, 2005Here is the situation
Table 1 : tbl_documents
docIDdocName
1aaa
2bbb
3ccc
Table 2 : tbl_Rating
ratIDratingdocID
131
251
321
432
The queary I need is to display the result in this form. must be like this
docIDdocName Avaragerating
1aaa3
2bbb3
3ccc0
NOTE : For getting the average I used this queary “SELECT SUM(rating) As
RatingSum, COUNT(*) As RatingCount FROM tbl_Rating WHERE tbl_rating.docID =
tbl_documents.docID”
PLs help me ?
Thx
Integration Services :: Dynamic Email Subject Line
Aug 6, 2015I have the variable @Monthname defined as shown below:
(MONTH(getdate()) == 1 ? "January" : MONTH(getdate()) == 2 ? "February" : MONTH(getdate()) == 3 ? "March" :Â
 MONTH(getdate()) == 4 ? "April" : MONTH(getdate()) == 5 ? "May" : MONTH(getdate()) == 6 ? "June" :Â
 MONTH(getdate()) == 7 ? "July" : MONTH(getdate()) == 8 ? "August" : MONTH(getdate()) == 9 ? "September" :Â
 MONTH(getdate()) == 10 ? "October" : MONTH(getdate()) == 11 ? "November" : MONTH(getdate()) == 12? "December":"")
By itself, it is working fine. I am attempting to have the @SubjectLine variable display the below:
CA - TFL for the month of August 2015
I am using the expression below in the expression builder:
"CA - TFL for the month of " + @[User::MonthName] + Â (DT_WSTR,4)YEAR(GETDATE())
When evaluating the expression, I get the below (month is missing):
CA - TFL for the month of 2015
Trigger :: Xp_smtp_sendmail :: Parameter Value In Message/subject :: Magic Table
Oct 23, 2007OK so now I'm setting up a trigger to email info to different people based on values INSERTed into one of my tables. I'm using an IF statement to determine who I'm giong to send the mail to, but I don't really understand how to include the data (parameters) in my message. Thanks for any help. Here's what I have so far.
Code Block
ALTER TRIGGER [smallin].[trig_test]
ON [smallin].[DATALIST]
AFTER INSERT
AS
declare @rc int,
@post bit,
@pre bit
SELECT @post = [POST], @pre = [PRE] FROM inserted
IF @post = 1
exec @rc = master.dbo.xp_smtp_sendmail
@FROM = N'ln.li@mydomain.com',
@FROM_NAME = N'Alert Mailer',
@TO = N's.mallin@mydomain.com',
@replyto = N'ln.li@mydomain.com',
@CC = N'',
@BCC = N'',
@priority = N'NORMAL',
@subject = N'This is post data',
@message = N'Goodbye MAPI and Outlook',
@messagefile = N'',
@type = N'text/plain',
@attachment = N'',
@attachments = N'',
@codepage = 0,
@server = N'exchange.mydomain.com'
ELSE IF @pre = 1
exec @rc = master.dbo.xp_smtp_sendmail
@FROM = N'ln.li@mydomain.com',
@FROM_NAME = N'Alert Mailer',
@TO = N's.mallin@mydomain.com',
@replyto = N'ln.li@mydomain.com',
@CC = N'',
@BCC = N'',
@priority = N'NORMAL',
@subject = N'This is pre data',
@message = N'Goodbye MAPI and Outlook',
@messagefile = N'',
@type = N'text/plain',
@attachment = N'',
@attachments = N'',
@codepage = 0,
@server = N'exchange.mydomain.com'
Send Mail Task - Would Like To Create Custom Subject Line
May 23, 2007Hi,
I imagine this will be done through the use of expressions.
What I would like to do is this. When my package fails, it's set up to send an email using the Send Mail Task.
I would like to create a custom subject line that contains:
1.) Name of the package
2.) Name of the task that failed (if possible)
I am seriously wondering how I can do this.
Thanks much
Are Sqlclr Stored Procs Subject To The Same SQL Execution Model As Other Sessions?
Sep 21, 2007are sqlclr stored proc sessions running in the same SQLOS execution model (Running, runnable and suspended status, Runnable Queue and Wait List) as other types of sessions and therefore ending up in the same queues, contending for very similar resources (except maybe for memory type because of MTL's role) etc?...or do they get treated in a very different way?
View 1 Replies View RelatedTable Design Question - Subject Matter Expert Database
Aug 8, 2007I would like to create a database that keeps track of our companies subject matter experts. I have roughed out some of the tables. I would appreciate any feedback on if this is the right approach and if there might be any issues when I start writting a front-end (probably VB 2005).
What makes this interesting (at least for me) is that a subject has an owner and at least 1 "expert", possibly up to 3. Here is what I am thinking for tables:
tblEmployee
EmployeeID (PK)
LastName
FirstName
etc......
tblSubject
SubjectID (PK)
Description
tblOwner
SubjectID (FK)
EmployeeID (FK)
tblExpert1
SubjectID (FK)
EmployeeID (FK)
tblExpert2
SubjectID (FK)
EmployeeID (FK)
tblExpert3
SubjectID (FK)
EmployeeID (FK)
Does this make sense? Would I run into any issues when trying to display this on a form in VB?
Thanks in advance for any help!!!!!
Cal
T-SQL (SS2K8) :: Retrieve Subject Wise Highest Marks List In A Table?
Jul 18, 2011I have a requirement like, we are having two tables in our database.
Table names: student, marklist
Student table values:
id studname
------------------
1x
2y
3z
4a
5b
Marklist table values:
id maths physics English
---------------------------------
1506070
2706040
3508070
45010070
5906070
But my requirement is, I need to display the data "subject wise" highest marks for each student.
for example:
id name highestmark
---------------------------------
1 x English
Reporting Services :: Change Subscription Subject On Report To Total Or A Field?
May 13, 2015change the subscription subject on the report to Total or a field.
On the subscription Data Driven Subscription does not exist.
Is there any other way to fix it?
Is RS2005's Matrix Data Region Feature Broken, Or Subject To Certain Limitations?
Dec 25, 2007I'm consistently getting >10 minute render times in a matrix based report whose underlying query only takes 1-2 seconds to run in both RS's data tab and mgt studio. The bad render times occur in preview tab, Report Viewer and when requested from Report Manager. I believe most of the time being taken is RS's attempt to pivot and present the data.
I can run a homegrown query that pivots (with unknown number of cols) the data itself in under 4 seconds but would be concerned about mapping an unknown number of columns to a table region in RS.
The matrix I'm testing with is 67 columns across (just over 2 months of daily columns) and is supposed to be 207 rows long. There is no aggregation required by RS when it is pivoting the data because each intersection occurs at most one time in the query's result set. The number of data points actually being "bucketed" is around 13,800 values. Row headers consist of 3 columns.
RS is also cutting off the number of rows it is supposed to be showing. The number of rows cutoff seems to be 100% repeatable based on the date range chosen. RS doesnt tell me when it cuts off rows that should have been displayed. From what I can tell so far, it never cuts off columns.
The number of rows cut off seems consistent across designer's preview, report viewer and when requested thru report manager. The "run" command (exclamation icon in data tab) seems to always return the correct number of unpivoted rows, just as in mgt studio.
Are there known bugs and or limitations in RS's matrix data region feature? Are there some settings or workarounds that might make it work more to my liking?
Scheduler 2 Appears To Be Hung.??
Apr 26, 2004Hi,
Below messages got throwed to sql ErrorLog. I could'nt understand what it means.. any help is appericated.
The Scheduler 2 appears to be hung. SPID 0, ECID 0, UMS Context 0x03CBAA40.
Error: 17883, Severity: 1, State: 0
WARNING: EC 36b9c098, 8 waited 300 sec. on latch 444f3b84. Not a BUF latch.
thanks,
-J
Scheduler 0 Appears To Be Hung
Aug 13, 2004Hello,
The users of my microsoft SQLServer 7 database could not log on to the database after the following message has appeared in the log file;
The Scheduler 0 appears to be hung. PSS 0x5B1630C8, EC 0x5B163278, UMS Context 0x3FC37E88
The problem was solved after I have restarted the database. I would be grateful if you could show me how to avoid such a problem in the near future.
Regards,
Albert
Euro Symbol Appears Like A '?' Instead '€'
Apr 6, 2004I have SQL Server 2000 SP3 and the default Code Page is:
I have a Table with a column of the type 'text'.
In this column sometimes it's necessary introduce the euro symbol (€). Now, when we write this symbol, after the SQL Server show it with a '?'.
I tried change the column collation to 'Latin1_General_CI_AI', ‘SQL_Latin1_General_CP1_CI_AI’ and ‘SQL_Latin1_General_CP850_CI_AI’ but there is the same problem.
Does any know what the cause off this problem is?
Thanks in advance!
Appears To Load 3.0 In Emulator Instead Of 3.1
Feb 12, 2007Here's what I did to a VS2005 Smart Device application.
Removed the reference to System.Data.SqlServerCe.dll.
Set a reference to C:Program FilesMicrosoft SQL Server Compact Editionv3.1SDKinwce500 System.Data.SqlServerCe.dll.
While it€™s loading in the emulator I notice that it appears to still be loading SQLCE3.0 instead of 3.1.
Deploying 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0wce500ARMV4isqlce30.ppc.wce5.armv4i.CAB'
Deploying 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0wce500ARMV4isqlce30.repl.ppc.wce5.armv4i.CAB'
Deploying 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0wce500ARMV4isqlce30.dev.enu.ppc.wce5.armv4i.CAB'
Do I need to set something else?
SSIS Appears To Be Installed But I Cannot Use It?
Nov 8, 2007Hi,
When I start "SQL Server Business Intelligence Development Studio" from the start menu it fires up Visual Studio 2005 with no SSIS project options. I appear to have it installed as the service is present in the Services control panel, and DTExecUI.exe and DTExec.exe are present, but there does not appear to be an integration with Visual Studio 2005. I have attempted to start up the SQLServer configuration application from the Add/Remove Programs control panel, however it always exits with an error. What do I need to do to get this running in Visual Studio 2005?
Thanks,
Mitch
I Need Help With What Appears To Be A Botched Install.
May 12, 2006Okay, i'm learning VB.NET (and having quite a bit of fun with it). Well, I had the old beta version. Anyway, went away for a week and found I could no longer use it. Why?
"Beta period is over.".
Yeah, it sucks.
Well, I uninstalled it via the uninstaller. I upgraded my .NET framework, etc, and redownloaded VB.NET. Everything installed okay, save for the SQL server. It repeatedly fails.
I have hunted down and shot each component quite ruthlessly, but I don't know what beta component remains. I can't get it to install because it says I have beta components left.
And VB.NET works. Barely. I had to disable the hosting process, otherwise it gives me a message about an invalid binding handle. Not often that a Beta product works better than the production one.
The uninstall tool won't work for some reason. I'm this close to just reformatting.
Please help, I'd like to code again.
Thanks.
Anyone Else Get No Body To Msgs After 10/28?
Oct 28, 1998Anyone else get no body to msgs after 10/28?
Why admin peoples?
Gap Between Header And Body
Jul 17, 2007Hello every body,
I am facing a smal formatting issue. the issue i have 7 text boxes attached with each other in the header to show the week days ,i.e Sunday,Monday,Tuesday,Wednesday,Thursay,Friday and Saturday
In Body,i have a matrix which will extend to have 7 columns for the weekdays.
Every thing is fine,Except a small gap between header and footer where i want the 7 text boxes to act as column header names.
I tried with various options like removing the header and placing the text boxes in Body followed by the matrix. 2) placing the seven column headers in a dummy table and attaching that with matrix,
But i am unable to remove the gap between them. if any one of you had experienced the same problem or knows how to solve.it's really a great help
Thank you,
A CAST That Appears To Use A Template. Is This Correct?
Feb 22, 2008I need some feedback on how this sql is perfroming a cast. I have used CAST before, but I amlooking at a stored procedure, and the CAST looks slightly different. Usually when I do acast, it is of the form CAST(ColumnName,DataType) but this cast is slightly different as theyappear to be using some type of template to cast with. Here is the code. I will put line numbers in for reference.
1 CREATE TABLE #Groups2 (PartyId uniqueidentifier)3 INSERT INTO #Groups (PartyId)4 SELECT PartyId5 FROM ttg_sfGroupsByPartyId(@PartyId)67 IF (@PortalId = CAST('00000000-0000-0000-0000-000000000000' AS uniqueidentifier) AND88 @TabId = CAST('00000000-0000-0000-0000-000000000000' AS uniqueidentifier))0 BEGIN
Also just to let you know, the the values PartyId, and PortalId are GUIDS.
So, I guess my question is, are they using a kind of template to format the data? So look at lines7 and 8. Are they using some type of template to signal the compiler, that the data will be of thatformat and will be seperated by dash symbols?
UMS Context Appears To Be Non-yielding On Scheduler
Feb 14, 2005Hi,
We are running SQL Server 2000 SP3 + security patches on Windows 2000 Advance Server.
After we did the security updates released before Jan 8th,
We are getting the below error 2 times within a month and the sql server is not responding after this error. After rebooting the server, it responds and works normally.
please give me a solution for this
2005-02-13 07:16:22.54 server Error: 17883, Severity: 1, State: 0
2005-02-13 07:16:22.54 server Process 89:0 (12a68) UMS Context 0x129E1EE8 appears to be non-yielding on Scheduler 0.
2005-02-13 07:16:26.27 server Stack Signature for the dump is 0x00000000
2005-02-13 07:16:26.27 server Error: 17883, Severity: 1, State: 0
2005-02-13 07:16:26.27 server Process 86:0 (1418c) UMS Context 0x12A36D98 appears to be non-yielding on Scheduler 5.
Document Map Not Appears When Using Internet Explorer 7
Sep 4, 2007Hey,
I'm trying to enter reports using Internet Explorer 7, but it shows me an empty Document map.
When I'm trying to enter the same reports from other computer using Internet Explorer 6, the Document map is filled.
I compared the security options on both machines, and also added the URL of the server to the Trusted sites, but the problem still exists.
The server environment is:
WINDOWS 2003 R2 (SP2)
MSSQL 2000 (SP4) + REPORTING SERVICES
I'm trying to access the report using Windows XP (SP2)
Anyone ever handled this issue?
Any ideas how to solve it?
Thanks in advanced,
Ravid
How To Add Comment Which Only Appears On The First Page Of The Report?
Sep 13, 2007Hi, experts,
How can we add comment which only appears on the first page of the report?
I am looking forward to hearing from you for your help and thanks a lot in advance.
With kindest regards,
Yours sincerely,
Heirarchy Already Appears In The Axis1 Axis
May 22, 2008Hi All,
I'm using VS2005 and I'm trying to create a report but two of the parameter, I think, have the same heirarchy?
Well, I am getting this error when I go to view the report:
An error occurred during local report processing.
An error has occurred during report processing.
Query execution failed for data set 'dsWorkItemHistory'
The System_State heirarchy already appears in the axis1 axis
My problem is I want one parameter to be WorkItemType and another parameter to be WorkItemState.
For WorkItemTypeParam
I have:
Parameter: WorkItemTypeParam
Dimension: Work Item
Hierarchy: Work Item.Work Item Type
Multi-Value with Default All
For WorkItemState
I have:
Parameter: WorkItemState
Dimension: Work Item
Hierarchy: Work Item.State
Multi-Value with Default All
My Dataset is:
WITH
MEMBER
[Measures].[Date Key] AS
[Date].[Date].CurrentMember.UniqueName
MEMBER
[Measures].[Moving Average] as
AVG({[Date].[Date].currentmember.lag(@IterationParam):
[Date].[Date].currentmember},[Measures].[Configuresoft_ComplexityRank])
SELECT
{
[Measures].[Date Key],
[Measures].[Configuresoft_ComplexityRank],
[Measures].[Moving Average]
} ON COLUMNS,
(
[Work Item].[System_State].[System_State],
(StrToMember(@StartDateParam):StrToMember(@EndDateParam))
)
ON ROWS
FROM [Team System]
WHERE
(
STRTOMEMBER("[Team Project].[Team Project].["+@Project+"]"),
STRTOSET(@IterationParam),
STRTOSET(@AreaParam),
STRTOSET(@AssignedTo),
STRTOSET(@WorkItemTypeParam),
STRTOSET(@WorkItemState)
)
Does anyone have any suggestions on this?
Thanks,
Nici