The first win 10 upgrade worked well on my Packard Bell Easynote TS11SB laptop, but the next upgrade REALLY SLOWED DOWN the startup process. Now 2 minutes. I've tried the highly unintuitive disable quick boot up trick to no avail.
View 5 Replieswin10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
View 2 RepliesI just updated my windows 10 build 9926 to 10041 and I found start up is too slow about 1-2 min, in 9926 is was just around 20-30sec. And its also freezing a lot on my dell laptop.
View 2 Replieswhen I log into my computer the screen becomes black for about 3 to 5 minutes.
View 1 RepliesMy Windows 10 does not start up faster as Windows claimed it would. It is very very slow indeed. I took a screen shot of the startup usage (Task Manager) and saved it as a Jpeg.what I can safely remove from this or else how I can make them go away for a while?
View 10 RepliesOn one of the Windows 10 systems here (upgrade followed by reset) all applications including the desktop become unresponsive for up to 20 minutes or so with the "spinning doughnut" mouse pointer displayed. During this entire period, something is hammering away on the hard drive.If I leave it long enough, the hard disk stops churning, and everything wakes up again.
Clearly some process has locked out all application screen updates (why?) while it does something to the hard drive.There are no entries in either the Application or System event logs that match up with the times that this has happened.The only common factor is that on several occasions I've had a VMware virtual machine running, but I don't think that it is every time.
Graphics card is an ATI FireGL V7600 sfc /scannnow thinks everything is OK.
I have freshly formatted my computer, installed all the updates and drivers, I have also RMA'd my video card (which i thoroughly tested and found it works fine on other computers.) but I cant figure out why my screen goes black but the computer keeps running. I can hear my music still playing and I run a dual monitor setup but when my screen goes black both monitors keep bouncing around the "Analog / Digital" box and thats all i can see, i have tested the monitors on other computers and they work fine as well.
View 9 RepliesSince I installed Windows 10 on my HP Pavilion laptop it boots up OK and I can get as far as my desktop. The taskbar settles in nicely and all seems fine.
But if I open any application and work on it for a few minutes the taskbar and everything else suddenly disappears. I generally can't close whatever programme I'm in but if I do manage to then instead of a desktop I have a blank black screen. Moving the cursor around is possible but there is literally nothing to open.
My only option is to ctrl/alt/delete for Task Manager and then shut down or restart. On restart, the same thing happens. It starts, I get to the desktop, everything looks normal, I open something then black-screen-death.
I am not using two screens.
I can not get my pc to follow my Power and Sleep settings. After 5 minutes of inactivity, the screen is blank and I have to wake it and login.
View 6 RepliesI just installed 10 and everything installed properly. My apps work fine. My problem is five minutes after everything loads and the Desktop is populated I get the black screen and cursor. If I am working in a app l.e. Mail, the app stays up but the desktop, task bar etc. and everything else goes into black screen. if I close the app then I have nothing.
View 4 RepliesI have updated my desk top with no problems and have set it to sleep after an hour, however it still goes to sleep after 10 minutes. It then sits with the blue sign on screen with no account pic or sign in box for ages before going to a blue screen which flickers for a few seconds before giving me the sign in options. I have tried adjusting all the power saver options to no avail!
View 5 RepliesToday I installed Windows 10 TP on my old HP Touchsmart tm2 laptop. First it all went well, I was able to log in and search for updates (iso is the first build). But after a few minutes the screen went of for about 3 seconds (black) and came on again only to turn dark again, come back and turn dark again. There it stopped. It's not totally dark, back lighting is still on I think.
It actually felt like the laptop tried to switch to an external monitor 3 times until it finally managed to find one. But there is no external monitor connected! I tried to restart the pc several times but luck. I only get to the windows logo, after that I get a dark screen instead of the login screen. I also tried to actually connect an external monitor via VGA but it shows the same dark on the monitor.
I reinstalled Windows 10 TP and it all went the same way again. When I tried to start in safe mode, I was able to login but couldn't open any apps/programs, not even the start menu. Ctrl+Shift+Esc finally worked and I could then run explorer.exe and get to the control panel. How I can get this laptop to work properly.
Ok, I have read several people having problems with the sleep/power save modes.
I have a similar problem. I can't keep my screen from going blank. Now what I have done is I went into the power save and sleep modes and had everything set to "never" including "none" on screensaver. Well in 5 minutes the screen goes blank but the computer, drive and my previous items & webpages are right where I left them. I also tried setting the time the display goes to sleep for 30 minutes and it stills goes into blank mode in 5 minutes. My assumption is, no matter what I set the power/save and screensaver to it still goes into a 5 min no activity screen blank.
Computer is a HP ENVY dv7, AMD A10,Quad core with 16Gb mem; 650Gb drive. Previous OS Windows 8.1. All drivers were updated to latest before update to Windows 10.
After upgrading to Windows 10 on an acer gaming notebook, the screen is blinking when booting and it takes 10 minutes to load windows.
Everything is okay when the system has started...
This happened to a friends laptop, just got it now.
For the last 3 weeks anytime I "restart" my hp 32 bit pc it takes 6 minutes and all the while the screen is black with a small blinking light in the upper left corner everything is fine after it finally restarts and if I shut it down and start it back it starts normally and in the morning when I first start it up it starts normally it just happens any time I restart it for any reason.
View 7 RepliesMy Start Screen very weird recently. I can't drag icon app to Start, I can't drag to organize app on Start, when I right click on app, only "More" appears, other options just gone,
View 5 RepliesWhenever I log-in from hibernate or boot, the start interface shows. I had this enabled in Windows 8.1 (start screen), but now I'm on 10 (no start screen) and it still shows.
There is no option to disable it. Is there a registry key to disable this?
P.S. My start screen is normal, not full screen.
Any of the items under games in this screen shot will not pin to my Start Screen? They will pin to my taskbar though. It's windows 10 Enterprise if that matters. I can right click and select Pin to Start, but nothing happens. Right click again and Pin To Start is still listed as an option, but doesn't do anything?
View 2 RepliesOn startup, I have it set to display the Start Screen without the Start Menu. When I exit an app the Start Menu is displayed and I have to click the Windows icon to once again display only the Start Screen (tiles only).
View 5 RepliesWindows 10 install went fine a couple of wks ago. Computer ok last night. This am it had turned itself off. I rebooted thinking there must have been an automatic windows update. Start up screen is red. I can not access the start menu nor the internet.
View 5 RepliesI read of a possible fix and it said to click on Start and then go to Settings and then go to Personalize and then go to Start and click on " Use Full Start Screen". when I click on the start icon and right click it, I have to go to Control Panel to go to Settings and one of the options is Personalize but there are three choices below it and one of them does not say go to " Start" and then click Use Full Screen. I don't know if this is related or not, but over the same period of time recently, I get an email that I receive every couple of days and there is a link in the email. When I click on the link over the past few days, nothing happens.I have had Windows 10 for about three months and the PC is a Dell which is about three years old.
View 3 RepliesWhen I switch on my laptop, appears to start up, brand name appears, then screen goes blank.
Stays that way, nothing else happens.
Screen is not black, a sort of faded blue.
My screen saver is set to display my Pictures on Shuffle after a minute, then go to Sleep after 25mns. There is nothing wrong with my Power settings, as that goes off OK, as one person had trouble with both. I upgraded to Windows 10 a couple of weeks ago from Windows 7 without any problems, and my screen saver has actually come on once since doing this.
I have changed to a WI FI modem about a week ago, but I'm sure the I had this when the screen saver came on. I do have a Logie Tech Skype auto mic plugged in which I don't use regularly, but haven't tried unplugging this to see. Everything worked perfectly with W7 and WXP before that. Even with these though, I did used to have the odd time when the screen saver didn't come on, but it always righted itself. Just wondering why, if it worked once, that it doesn't work now. My Desk Top just stays put for 25mns now that the screen saver doesn't come on, then goes to Sleep, but I know I could change the time for this.
Even if we don't need a screen saver now, I liked to see MY Pictures slideshow coming up, as they looked really nice. If it is a Microsoft Error, then I hope they will fix it. Mine's not due to poor maintenance, as I have AVG Tune-up and Security installed as well as the AVG anti-virus. The Tune-up keeps the Registry clean and cleans up the Desk Top and space management etc.
For the last 10 days when windows 10 starts up it now automatically opens File Explorer. I can't seem to get it to just open the normal desktop.
View 5 RepliesHow to add groups to the Start Screen? I presently have 4 different groups and I can rename the groups, but I don't know how to add additional groups. I would like to add additional tiles to my start screen but want to keep them organized.
View 2 RepliesHaving issues with pinning things to start? I am unable to pin anything to start after upgrading to 10240.
View 6 Replies