ASRock Z97 Pro-3 / Audio From Two Sources Simultaneously?
Oct 7, 2015
Is it possible, in Windows 10, to have two sources play audio in two different outputs simultaneously?
For example, I have my TV speakers, and my normal computer speakers. Could I set it so that Skyrim will output from my computer speakers, and Chrome will output from my TV speakers at the same time?
Note that I don't have a dedicated sound card, I'm just using the default onboard audio for an ASRock Z97 Pro-3.
View 1 Replies
Similar Messages:
Feb 24, 2016
I do not have the option of outputting two sources in windows 10 it seems
View 1 Replies
Feb 10, 2016
i've installed windows 10 on linux before and i've never had any problems booting it (from what i remember, through UEFI boot sources). currently the windows 10 iso seems to be the only one that isn't appearing in UEFI; i installed peppermint from lubuntu using the same image disk writer on the same usb 30 minutes ago.am i supposed to have some specific settings enabled/disabled in my bios to boot the windows install? secure boot is disabled and legacy boot is enabled.
View 2 Replies
Jan 8, 2016
I have a problem in the installation of Windows 10. I have a CD installer of windows 10 pro 64 bit and I want to replace my Windows 8 OS thats why I perform a clean install. But whenever I try to install the OS. I have this error:
"Windows cannot find the Microsoft Software License Terms. Make sure the installation sources are valid and restart the installation."
View 1 Replies
Aug 16, 2015
First here's my rig:
Mobo: asrock 970 pro3 r2.0
CPU: amd fx6300 not oc
Gpu: vapor x r9 280x 3gb
Ram: 16gb (8gb vengeance pro, 8gb ripjaws 1600mhz)
Psu: corsair RM1000
Storage: Seagate barracuda 2tb, Seagate pipeline 500gb, Kingston now ssd 120gb.
Problem: okay so I recently upgraded my rig from a 7970 to a 280x. I had a 550w antec psu at the time and my pc shut off by itself a few times which stuffed with my windows 10 install. It was saying "bootmgr is missing. So I went to reinstall windows and it shut off again halfway through, I decided it was due to lack of power so I recently bought the rm1000. I have hooked everything up and was about to do an install of windows 7 but now not one of my drives are showing up. Not in the bios either.
I have tried different cables, different ports, the cables work with an optical drive and it shows up. I have tried updating the bios and cleaning cos. Replaced the battery. Is it possible that a psu can kill all three drives without any visible sign? I hope not.
View 1 Replies
Aug 20, 2015
I recently upgraded from Windows 7 to Windows 10, and now i am no longer able to power on my pc from my keyboard or mouse. Nothing has changed in the bios settings (see below) and i'm unable to find anything in the windows settings or from some frantic Googling,
Admittedly not the biggest problem in the world, but i did find it handy as i game on my tv and love the fact i didn't have to move my lazy backside to power on my machine.
View 2 Replies
Nov 18, 2015
I tried running ASRock App shop today and I keep getting an error that says "Out of Memory". I know my memory is not an issue and have never had this problem before. I uninstalled it and downloaded the most current version from the site and am still getting the same message.
View 1 Replies
Jan 9, 2016
The PC freezes at random times. The GPU is EVGA GTX760 with i7-5930k CPU
View 7 Replies
Jul 29, 2015
I am trying to install windows 10 on my system, with an AsRock H97m Pro4 and a Pentium G3258. I have created a usb to do so, as the update tool did not work. Whenever I try to boot off of the usb however, the windows logo is displayed for 10-15 seconds and then the computer restarts.
Looking more into it, it appears that other people are having similar issue with the G3258 and windows 10, not sure if this will work or not...
Ok, so windows 10 really does not like to play with the G3258 when both cores are enabled, just search "windows 10 G3258 not working" and several other large threads pop up...
View 1 Replies
Jul 31, 2015
My PC is the HP ENVY TouchSmart M7-J120DX with Beats Audio quad speakers and two subwoofers. After running a clean installation of Windows 10, my volume icon had an error "no audio device output" / IDT High Definition Audio Codec. The troubleshooting option did nothing. I uninstalled my audio device, and restarted my pc. My sound is back, but it seems that the middle speakers are the only ones working. My volume icon and sound device now is labeled "High Definition Audio Device" which now sounds substandard, just like those cheap tinny speakers you can find at the dollar store. How to recover my original great-sounding original speakers!
View 4 Replies
Aug 2, 2015
ever since I got windows 10 my maxx audio doesn't work and now just says "MaxxAudio processes internal speakers output only"
View 1 Replies
Sep 24, 2015
I don't know if this started since Windows 10, but I use headphones for PC sound and if I go outside to smoke a cigarette or something I take my headphones with me so I can listen to music from my phone. When I come back and replug my headphones into my PC, audio no longer works in games, FL studio, YouTube videos, etc. Until I restart the entire program. Systemsounds work fine after replugging but audio in anything other than Windows don't
View 1 Replies
Jul 30, 2015
I upgraded last night from Windows 7 to Windows 10 Pro.I am connecting from work with RDP to my home PC. RDP is Working, but there is no Audio.This is an existing connection that worked yesterday when both PC had Windows 7 on them.I have checked group policy on the server and it allows audio redirection. On client it is setup to bring audio to remote pc as it has always been. Client is with updated rdp client to allow protocol 8.1 with remotefx.I don't have another pc with Windows 10 to check if this is some incompatibility between Windows 7 as a client and Windows 10 as host. I did install the official Microsoft Remote Desktop Client for Android on my phone and tried with it, but the result is the same.
View 1 Replies
Dec 7, 2015
I held off to upgrade to Windows 10 until I thought it was safe. My motherboard manufacture said it was Window 10 ready, so I upgraded over the weekend. Now I have no audio. This is bad, because this is our media center for our house hold. As a quick fix I purchased a replacement sound card that has Windows 10 x64 drivers on their website. I installed it today, installed the newest drivers, and still no audio. I hooked multiple speakers to it and no sound. I hooked the speakers to my TV and play a regular show, and there is no problem there. Just no audio from my computer. The additional sound card I just put on to try to get Audio working is an Asus Xonar DGX PCIE 5.1 Audio card.
View 3 Replies
Aug 13, 2015
like I said - NO audio
View 1 Replies
Aug 11, 2015
There is no audio even thought my Conexant Smart audio is upto date
View 1 Replies
Aug 11, 2015
I have a Dell XPS 8100 desk top. I use a Logitech web cam with mic for face chat and skype. Will this set up work with Cortana, as far as speaking to and getting answers from her?
View 1 Replies
Aug 4, 2015
I have just updated from Windows 7 to Windows 10 on my laptop and everything works fine except for videos. When I try to watch a video on Windows Media Player, I get a black screen but the audio of the video works fine. I have been using the VLC player without problems. YouTube videos for Microsoft Edge didn't work until I switched to use software rendering instead of GPU rendering. If I try to use the Film & TV for my videos, I get an error 0xc00d11cd (0x80004005) and to visit Xbox support. In the Xbox App, when I try to watch a friends video, it says the video could not be decoded. When I try to stream my Xbox, I get a black screen but the audio of my Xbox works with what I am doing on my Xbox controller. So the streaming works, but no video. i have tried everything.
Sony Vaio
Model: VPCCB27FD
Processor: Intel Core i5-2410M CPU @ 2.30GHz
Memory: 6GB RAM
Graphics Card: AMD Radeon HD 7400M Series
View 6 Replies
Sep 13, 2015
after installation of windows 10, my laptops audio jack is not working. No sound is coming in headphones.
View 1 Replies
Aug 7, 2015
I noticed the sound was off on my task bar (just installed Windows 10), anyway when I went to the control panel it said there was no audio device installed. So how do I go about installing it? I googled but all the advice was for older editions of Windows
View 1 Replies
Feb 27, 2016
Can stream audio over USB on windows 10 mobile? I want to get an external DAC and feed audio into over USB... (not mass storage mode though) just want to check if it might work.
View 3 Replies
Aug 20, 2015
No audio after installing windows10 on my dell vostro
View 1 Replies
Aug 11, 2015
Just upgraded to Windows 10. I can get the audio from the videos but not the video itself.
View 2 Replies
Aug 11, 2015
How Do I Record Mic Audio Using the New Gamebar In Windows 10? I Recorded a Whole Episode Of Giving A OverView Of Apps And Talking About The Os Then Guess What It Didn't Record ....
View 1 Replies
Mar 13, 2016
Desktop Audio Device is set to my sound card, but it doesn't work. Shadowplay works fine
Microphone is disabled, there is no mic
Shadowplay's volume is too quiet. Is it because I'm using sound card?
OBS Studio and turning up the game capture server in the Windows volume mixer solved my issues respectively
View 1 Replies
Aug 5, 2015
I am using windows 10 on an asus g750 laptop, with realtek audio manager. I use headphones and have to keep my volume levels around 4-10. Otherwise they are to loud and hurt my ears. At roughly 20 you can hear the audio clearly from 6 inches to a foot away. Is there any way to re-balance my audio? or set a new maximum? or should i try to uninstall realtek?
View 1 Replies