I have a new laptop (came with Windows 10 Pro installed). I have installed Office 2010 and everything is working fine except for Access. When I attempt to filer by pressing just a letter to get to the names starting with "C" (for example), Access locks up and never responds. I have to shut down the program. This worked fine in Windows 7 and Windows 8.
View 1 RepliesI recently upgraded to W10 and now when I try to change a form in Access 2010 DB It errors and has to close. The error is : Faulting module path: C:PROGRA~2COMMON~1MICROS~1VBAVBA7VBE7.DLL. If I undo the change then all is fine. There was a problem I found on Google with same error but due to SP1 for office. I
View 1 RepliesWhen I have my webcam security software running all day (12-hours), the laptop runs fine. But when I shut the software down and then leave the laptop idle, it locks up.
It also happens when I start the laptop up and just leave it sit idle. So far, there's no specific amount of time where the laptop will lock up. Sometimes it's been within 30 minutes or it could be several hours (maybe update is running). But it freezes every single day when just sitting idle.
This isn't the kind of lockup other people are reporting where they're still able to move the cursor, etc. I'm talking complete lockup. Time, mouse, keyboard. The entire screen is completely froze and the only thing that resolves it is a restart.
I have this laptop:
Amazon.com : Dell Inspiron 11.6-Inch 2 in 1 Convertible Touchscreen Laptop, i3147-3750sLV : Computers Accessories
I've checked my power options and I'm running in performance mode with everything disabled. That means nothing is slowed down or shut down while the laptop is running.
I've also checked every event in Event Viewer and there's nothing anywhere in there that would point to a possible cause.
I recently installed a new motherboard, cpu and ram and evert since then i have been getting some very strange lock ups. They never happen when i am using the PC. It will only lock up after i have left it on overnight. When i wake up the screen is frozen and the keyboard and mouse are non responsive. I have ran extensive tests on the new ram/cpu and i have yet to find an error or cause a crash from stress testing. I have also stressed the GPU and still no crashing. I have went through the even/reliability logs and they dont really seem to have anything showing up at the time of the crash. I guess the nice thing about this crash is since the screen freezes the clock gives me a nice time stamp of when it happened. software that can monitor crashes.
Current hardware
Msi M3 (MS-7978) motherboard
i5 6600 @ 3.3
2x 8gb ddr 4 pc4-17000 g skill inlt 1066.7Mhz 15-15-15-35
EVGA GTX 970 SSC
I have a Dell XPS435 (about 5 years old, I think) that is acting up. Sometimes on boot up,it will just freeze, forcing me to hard-boot. Lately, it just won't even boot up and if it does, it will just shut down sometime shortly thereafter (30 mins or so). I'm looking at speccy specs right now and the temp is pretty high, but I don't know what the median temp is (never had to before now ) I'm guessing the fan is going out?
the system specs are below:
Operating System
Windows 10 Pro 64-bit
CPU
Intel Core i7 920 @ 2.67GHz144 °F
Bloomfield 45nm Technology
RAM 8.00GB Dual-Channel DDR3 @ 531MHz (7-7-7-20)
[Code] ....
I attempted an install of Win10 when I first got the go-ahead several weeks ago, it went through the entire install (which took an eternity) and then decided it was incompatible as windows updater encountered errors, it reverted back to 7. Last week I tried again and the pre-install launcher came up with an obscure windows update error, which fixed after downloading and installing the auto-tool for windows updater, but then came up with yet another different error with winupdate.
I restarted, Rand the tool again, and although the window still showed a red X and the same second error , it allowed me to click "retry" which then just force launched the windows 10 migration. I figured might as well, didn't prompt me with any warnings about the potential error so anyways long story short after going ahead, it now freezes on the new logo immediately when it tries to boot the OS, after a couple turns of the progress wheel. Don't know where to go from here and it doesn't seem to be reading any peripherals. Have disconnected and reconnected power and had to force shut down nearly half a dozen times.
I have searched and can't seem to find anything on the subject, but I have I user that occasionally locks his screen late at night (at home) with programs open (word, excel). When he checks his computer the next morning, many of the apps will have closed. No error messages are displayed, it does not appear to have restarted, and reliability doesn't indicate any issues. He is running Win 10 Education on a Lenovo Helix 2 with office 2016 installed, I can dig up his build info if needed.
View 1 RepliesI've been working on my new computer. I really enjoyed picking out the parts and putting it together, but I'm not enjoying the enormous amount of troubleshooting I'm having to do.I installed Windows 10 on my PC. It froze on set-up, so I reinstalled it. I was then able to use it for a short amount of time and then it froze again. I decided to totally format the drive and reinstall it yet again, and after several attempts (it froze during the set up process several times) I was able to get it installed. Yet, it still freezes.
Normally Windows 10 would freeze in the first few minutes of use, but when I boot Windows 10 through safe mode, it doesn't seem to freeze. My guess is that some kind of software issue is causing this (drivers?) - but I don't know.(Let me clarify that I am able to boot into and use the BIOS just fine. I don't think it's a hardware issue, but I could be wrong.) Is there something that I could do to prevent this from happening? I don't have my drivers installed yet. I also noticed a few errors in the device manger. I'll list them below:
Device Manager > Other Devices
*Base System Device
*PCI DATA Aquisition and Signical Processing Controller
*PCI DATA Aquisition and Signical Processing Controller
*PCI Memory Controller
*PCI Simple Communications Controller
*SM Bus Controller
*Unknown device
They have a yellow triangle next to them. Could my freezing problem be related to this?
I recently upgraded to win 10. I found 2 which are related to when you close the lid of your laptop.
1. If you close the lid when the laptop is unlocked, and then open it up again after it has went to sleep, it will not lock the laptop but re show whatever you were doing.
2. If you close the lid when it is locked, it goes into a deep sleep. This sometimes causes me to press the power button so that it wakes up but then it reboots itself I think and shows the lock screen again.
When I lock windows (win + L) and relog back on any application I had running when I locked the account will be muted (browsers aren't affected). The application doesn't appear in windows volume mixer and the only way ive found to get my sound back is to restart the application.
For example, I`m playing fallout 4 I need to leave my computer so I lock it (for a variety of reasons) then I return a minute later and my sound is gone. The only way to get it back is to restart the game. This is pretty annoying for me because I have to somewhat frequently lock my windows while I`m doing things.
My computer has been locking up recently. It seems fine until I start to put strain onto the system. This is usually done by me playing games. At first I thought it was heat and noticed my processor getting up there in temp. I went out and bought a new case and a new liquid cooling system (Something that needed to be done anyway). As I monitored over the next few days the freezing didn't stop, but my temperatures were a lot better. I did a complete reinstall of windows onto my HDD's to make sure it wasn't a driver. I did HDD's checks and nothing showed up. My next step was checking the ram. After running for 8 hours on each stick, then together, nothing showed up as an issue. I pulled out each piece to test everything, but like I said it only happens when I seem to put strain on the system. I tested both my graphics cards and I thought one was causing the issue, but it freezes on both. At this point I am at a lose as to what it could be. My thought is it might be the motherboard, but I am not sure. So I ask to you all, why is my computer locking up?
My system specs :
Motherboard- Asus Sabertooth 990FX R2.0
Processor - AMD 9590
Ram- Corsair Vengeance 8GB x 2
GPU - AMD R9 290x x2
Power Supply - Rosewill Lightening 1300w
Liquid CPU Cooler - Corsair Hydro H100i GTX
HDD- Wester Digital 1TB
Wester Digital 2TB
SDD- Sandisk 120GB
Case- Cooler Master HAF X
Wireless Card - TP link WDN4800
More about : computer locking wrong
I looked in my event viewer and am seeing a lot of errors.
I've had a problem on my laptop.
When I'm reading pdf files using adobe reader, the screen locks itself after 3 minutes as it is supposed to when I'm not using the pc. But I am using the pc and I'm scrolling through the pdf file using the touchpad and yet the screen still locks itself after 3 minutes. This doesn't happen if I'm watching a video or working with documents
Laptop running windows 10, build 10586 November official release. Problem existed before 10586.
When I open an email in Outlook 2010 and click on a browser link I keep getting a popup saying "How do I want to open this?"
I keep ticking the checkbox at the bottom of the popup so that I use Internet Explorer, but the popup appears every time I want to open a link.
How can I get rid of this popup, I have set Internet Explorer as my default browser?
Is it possible to import folders from Outlook 2010 into Windows mail? I have a few bespoke folders that I use a lot.
View 2 RepliesMy computer has been having a problem with locking up randomly. Hard reset is the only way to recover. I ran stress test on CPU, GPU, memory checker, Sea gate tools was never able to recreate the problem or find any issues with any hardware. I also swapped out video cards and still had the same issue. I also monitored temperatures and never had it get hot. But if i reboot into safe mode with networking windows never locks up.
Computer specs
windows 10-upgraded from 8.1
i7-4820k
8gb ram
mobo alienware aurora-r4
Radeon r9 200 series
I have deleted and recreated the *.ost file several times and it still asks for the password several times and then comes up with the following message. "Cannot expand the folder. The set of folders cannot be opened. The file C:UsersEdAppDataLocalMicrosoftOutlooksundancer245_hotmail1.ost is not an Outlook data file (.ost)." I have no problem accessing this account in FireFox and none of my other Hotmail and Outlook accounts are causing this problem in Outlook 2010. I am running Windows 10 on this computer and on my Wife's Tablet and I can access the Problematic Hotmail account from the Tablet and also from my new Lumia 950XL windows Phone 10.
View 2 RepliesDuring windows 10 upgrade office 2010 has disappeared...
View 1 RepliesGetting update errors but don't have office 2010 on this system.
View 2 RepliesWhen trying to open a .DOCX file in Word 2010 I receive the following error message:
“there was an error opening the file.”
What can be causing this to happen?
Upgraded to Windows 10.
Everything was fine for about a month until I had a disk crash. After several days I got that fixed and did a clean install of Windows 10.
Now I am trying to reinstall Outlook 2010 from the original DVD. Valid product key (setup validates it).
Setup runs, then encounters an error (doesn't tell me what), and backs off all files.
As far as I can tell, Windows 10 is saying the SETUP file is incompatible, not Outlook 2010 which Microsoft states is still compatible with Windows 10.
Can't lauch Outlook 2010 from Internet explorer! on Windows 10 Home. Gives me this error message.
I also can't install my printer. Keep getting error message saying printer driver is in use. It asks me to stop the driver so I do and then I get error message saying I need to start it! I haven't a clue how to fix it. The printer does work wirelessly but I can't use any features like Duplex printing Etc.
I just bought a new Windows 10 machine (HP Envy) and I'm running Outlook 2010. When I select multiple e-mails (Shift, select top e-mail, select bottom e-mail) it correctly highlights all e-mails. Then when I right click and select "Mark as Read" it removes the highlight from multiple e-mails and instead only highlights the last e-mail. I would often select multiple e-mails, mark as read, and then delete.
It's not a huge deal, but I could do this in Outlook 2010 in Windows 8.1 without issue and I can do it in Outlook 2003.
After successful upgrading to Windows 10 from Windows 7, I can send emails but cannot receive mail in outlook 2010.
Getting message: Task '……….@sbi.ae - Receiving' reported error (0x800CCC0F) : 'The connection to the server was interrupted. If this problem continues, contact your server administrator or Internet service provider (ISP).'
Also successfully run the SFC /scannow tool without any error.
Since the update reboot Outlook is running in safe mode and though the reading panel is correctly set up it is closed every time Outlook is restarted. Add ones are all missing. How to sort it short of removing all the updates. I have run a repair install and SFC /SCANNOW with no problems or change.
View 7 RepliesI have Outlook 2010 on two PCs and use the Hotmail Connector to synchronise my contacts with my Microsoft Account (people.live.com).
I can create/delete contacts on any PC and at the web page at people.live.com and these will synchronise across all accounts. However, if I change details of an existing contact on the PC e.g. change the phone number) then this is not synchronised. If I change the details on the web page at people.live.com then the PCs do get updated. How to troubleshoot this problem to ensure that changes to contact details in Outlook 2010 are synchronised correctly across all accounts?
Outlook 2010 wont send mail after the upgrade. I have deleted all accounts and reinstalled them but I still have the same problem.
The mail just sits in the outbox. error 0x800CCC13