I am currently on a different computer than the one where I am locked out of the Administrator account.
Less than 3 weeks ago, I bought a new laptop that came with Windows 10 installed. When I finally set up the new laptop and tried out Windows 10 for the first time, I was annoyed at the whole thing with Windows blocking some programs from being installed and a lot of other annoying prompts. This is when I found out about a higher level of Administrator access known as a Super Administrator to avoid most of these prompts, and install programs without being blocked by Windows. So what I did created a new user account with the Command Prompt and gave it Super Administrator access without setting a password. Once I logged into my new user account, I deleted all of the other user accounts on my computer, since I had no need for the other user accounts (such as the Guest account).
The real trouble happened when my computer crashed and experienced a BSOD. After the computer rebooted from the BSOD, I found out that I could not log into the Administrator account because it prompts for a password, but I never set up a password for the account. Inputting no password does not work. I am not sure how a password was set up on the Administrator account without my knowledge and whether this might have been related to my BSOD crash.
I have made an attempt to get back into my only user account, but nothing has worked so far. All of the built-in Windows diagnostic tools have failed to work, since they all require that I log into the Administrator account, which I am unable to do. My original plan was to use the option to reset my PC that lets me keep my files, but that won't work without having access to the Administrator account. What password is on my Administrator account considering that I never set up a password and somehow the account now has a password on it. How to get back into my Administrator account?
Recently I had to make a change in my computer that required the Elevated Administrator account to be used. I finally figured out how to open that account, did my thing, shut down the Elevated Administrator account, and returned to my standard account. Then I discovered that I must have done something else while in Elevated Administrator mode because after that I could not install or uninstall any program, could Not access System Configuration, could Not access Safe Mode (used the shutdown /r /o command. When I got to the selection window and pressed F4 I waited for 45 minutes with no Safe Mode result), cmd -> "run as administrator" does not work. When using the GUI to work on this (open Elevated Administrator) I get "To continue, type an administrator password, and then click Yes." But there is no place for a password and the Yes button is not active. When I use the command prompt I get an Error 5 message.
I changed the settings on 'netplwiz', and made the account 'Homegroupuser$' an administrator, and removed the administrator privileges for the account i use. now i cant access any administrative settings.
I would like to use some of the features that require you to log in with a Microsoft account rather than my own local administrator account. But when I did that, it totally changed my settings for my local account including desktop, etc. So I deleted the Microsoft account. how to keep my local account settings when signing in with a Microsoft account.
I recently downloaded Windows 10. For some reason, my account on the computer --which is the only account on the computer-- is a 'standard account'. Because of this, I can't download or make some important changes that I need to make. I admit that I'm not computer savvy, but I've tried a few things. I've tried activating the 'hidden' Windows 10 administrator password but I can't because you have to run the cmd as an administrator to do this [when I try it doesn't give me the option to click yes]. I also tried adding family members to my account in order to make those accounts administrators. I created new email addresses, send the invitation, and accepted the invitations, but every time I log on to my Microsoft account, it still states that they invitations are pending.
I have purchased a laptop from a friend. Just prior to my purchase Windows 10 got loaded. The compter has one account which is an administrator account. I think that the same account information is used as a login to Microsoft. I would like to remove the account and substitute my own administrator account. How do I do that.
Windows is frustratingly taking up all of my time and I have tried everything google has to offer to try and fix it but it seems like no one has screwed up as much as I have on whatever forum.I'm trying to set my account to administrator because I can't install programs, change account settings, make any changes through CMD without getting the system error 5 access denied message and I can't set the administrator account through CMD either. I also don't have the permission to change anything in regedit and I can't even reset my pc because it requires an administrator password which I don't have, is not "nothing" nor is it administrator or admin or password and I can't change it through cmd either.I can't even access the administrator account because it is disabled and even with an elevated cmd I can't activate the "hidden" administrator account.
I have purchased a used Asus laptop that already has Win 10 installed on it from the original owner. All of the settings on the computer are linked to that owner's Microsoft account and administrator account. Is there a way for me to change the administrator information to my Microsoft account and email? I can log in using the old owner's password to access the administrator account, but I don't see any way to change the account to my information. If I create a new user account and make it an administrator account, when I log in using the new account, there is no access to any of the apps I need from the original account.
Upgraded to W10 from W7 several months ago now and activated and used only the built-in Administrator account. Which is what I have done for many years now to stop the UAC popups.
However, I have soon discovered this Administrator account, while blocking the UAC popups has some serious limitations. Like cannot run Edge or any of the Metro Apps. Yes, I have tried the workarounds but they too have issues.
So how can I transferred all my settings for my programs and windows to another local username?
When ever i turned my Pc on its showing invalid username/password...Its getting in to a user account for which i dont know the passwpord....its hidden administrator account i think once i tried that in command prompt,,,,,
i have tried various steps like
1:in command prompt i used net user administrator /active:no it shows "system error 5 occured "
2:i tried REGEDIT there when i open the SAM file is shows this user is already in use
When I first converted from Win 7, Win 10 transferred my main ACCT: Patrick
But, the boot time became so elongated, the net gave me some tips but to so, I had to use SAFE BOOT. But the old F8 would not work so I used the MSCONFIG. But, then Win 10 CREATED a new account using my email and password I had for Microsoft Live web site, DELETED MY OLD PATRICK AND REAL ADMIN ACCT. It took considerable time to figure the PW it was looking for.
So went back to regular boot, renamed the EMAIL name to the original PATRICK acct as it had been deleted,
They did give me ADMIN rights but that rarely works when you do some heavy lifting.
This leaves me with ONE ACCT, PATRICK with ADMIN RIGHTS, not with full ADMIN privileges.
So, lets create a REAL Admin account.
Net says: in DOS mode, net user administrator /active:yes Wrong, access denied tried: net user patrick /active:yes Wrong, access denied
When I was converted, it converted the Home Premium to Home.
I was wondering if I could use the premade admin account for my everyday one but I am not sure if it's safe to, or if not how could I make another user the overall admin?
For one reason or another I managed to delete administrator privileges for my one local account. After several hours messing about I have managed to activate the hidden Administrator - but I am finding that this Administrator is not working.
1. It cannot see my main local user account. It does not list it at all in User Accounts, so I cannot change any settings etc. Similarly, when I open User Accounts with my main account, it cannot see the Administrator, or the new account I created (see below)
2. When I access User Accounts using "netplwiz" it sees my main account but will not highlight it (or any other account). It is stuck on Administrator.
3. It will not create a new account. When I use it to access Accounts and try to add a new user the cursor spins and nothing happens.
4. I added a new user (with administrator privileges) using the command prompt - this was successful, but it bumped my main account off the login page, and it doesn't acknowledge it on the dropdown list with the start menu. (Yet when I restarted it took me straight in to my main account.)
If I boot normally, all three accounts, including the built-in Administrator account become Standard accounts, even though they were all setup as Administrator.
If I boot to Safe mode or Safe Mode with Networking then they all are Administrator accounts.
Right now I'm running Windows Repair All-In-One. Will see if that works.
This computer also boots to a black screen two out of three times (not always though, sometimes more, sometimes less.). If WRAIO doesn't do the job I'll tray a Refresh. If no joy there then I'll clean install. I have a good Macrium image backup so won't lose anything no matter what I do.
I did an upgrade from W7 yesterday. Put the computer to sleep overnight. This morning it wants some password. What it wants as I did not explicitly set one. How do I get into the system? Do I have to reinstall W7 then do an upgrade again? I never set any passwords on W7 as all of my passwords are in Keepass.
So the other day I noticed my only account on my laptop had lost administrator privileges. I looked up how to fix this and went about doing. I booted into "safe mode with command prompt" but that realized I didnt need that, just regular safe mode. I turned off my laptop, and turned it back on expecting a normal boot.
When it boots up, it goes straight to the windows login screen for "administrator". No matter how many times I hit ok it doesnt do anything or will start to load but eventually come back with, "account has been disabled. Please see system administrator". As of right now, that's all I can do with my laptop, so its pretty much useless to me. Is there a way to boot into safe mode using the power button or holding an F# key?
I downloaded Windows 10 and created a Microsoft account. I wrote down the password. The next day a log in screen appeared (which I never had before) so I tried to log in. My password didn't work. I tried everything. I called Microsoft and filled out a form and emailed it in. They Told me I have two step verification and they would have to download a program to my computer and I will lose all my software.
I recently upgraded from windows 7 to windows 10. I didn't realize it was going to mess with my log in credentials just to get into my PC. Well, I'm locked out of my PC. I can't log on, it just tells me when I enter in the PIN and the Password that "Your device is offline, please enter old password." I do that and it rejects it.
I can't get internet access because I live on a college campus and the way they have it set up is you have to be logged into your computer before you can access the network.
I tried "resetting my PC" and chose the option to delete all the data but no idea if that will work yet.
I also tried reinstalling windows 7 from the CD, but I can't seem to get it to do that since I can't log in and get any kind of interface. I tried using the boot menu to boot from the CD (it's a retail version of windows 7.) but that doesn't work.
What do I do here? Is my computer bricked? This is ridiculous.
I upgraded my windows 7 to windows 10 my dell insperion computer. the original conversion to windows 10 seemed to go OK for a few days. The about 2 days ago, I created a MS user account to access some of the MS store apps. Now the original Windows 7/10 user accounts - local accounts i guess - 3 of them - that we signed in with have been replaced with 1 account - I believe to be the Microsoft account (different name and password).
When we sign in with that MS account and get in to the computer, we have a pop up box that says "Critical Error - Start Menu and Cortana aren't working. We'll try ti fix it the next time you sign in." We can't do anything but select the pop-up box option of "sign out now". When we sign in again, it is the same thing.
I'm not sure if this is 1 problem or 2 different ones.
1. How do I get back my initial local user accounts, so I can access all of my programs and files? 2. How do I fix the Critical error?
I've been using Windows 10 for weeks. Until today, it started up just fine by displaying my name and no email address. This is exactly how I want it to be.
Today when Win 10 would not recognize a printer, in order to download an "app" to work with this, I was required to provide a Microsoft email account, which I did (an old Hotmail account I rarely use). Now when I restart or wake up the computer, that old Hotmail account appears as "Administrator". However, I do NOT want that old Hotmail email address associated with this computer.
How can I remove it and get back to logging in with NO associated email address?
NOTE: I do not want to delete the old Hotmail account; just want to remove it from my Windows 10 "Account" menu (My name + Hotmail address + "Administrator").
In case it's required to associate Win 10 with an email address, I use Windows Live Essentials with a company email address. I tried adding it via the "Other Account" option, but Win 10 said it did not recognize the email address I entered, sigh.
How can I create an admin account on a system that only has a standard user account? I suspect that the answer is that I can't, but I live in hope.
I can't provide specific details of the PC in question because it's my son's, and he lives 35+ miles away. He was running Win 8.1 but recently (in the past couple of days) upgraded to 10 and has run into a driver issue. He can't upgrade the driver because he doesn't have admin rights. I think he has an admin account on his system because I put it there, but it doesn't show up as a log-in option.
I've tried to enable the hidden admin account from a standard user acc on my system by running the command prompt as admin but am always to verify as admin - catch 22..
I recently upgraded a HP computer from Windows 7 to Windows 10 pro using the Windows update/free Upgrade.
How can I change my childs admin account to a child account? The account is registered With a Microsoft account and I have added my Microsoft account as a second admin on the computer.
I have a Laptop (Windows Home 10) and a Desktop (Windows 8.1 home) and I want to enable Administrator on both. I have used all of the suggesting about this I got on the internet and nothing works.
I have encountered many problems to come as I learn Win 10. The first of which is how can I change or edit the administrator's name on my PC. I thought like win-7, I could edit, change, or even turn off password protect.
I find no way to do this, as I'am the only one using my PC, I do not need to sign in with a password every time I fire my PC up. Normally I resort to system restore for most problems, however I don't think that would work in this case.
