I've Dell latitude 3330 which is connected to school domain. Before i disconnected from school domain i created user name- Admin but forgot to set it in Administrator. I'm now in Standard User instead of Administrator. But some how Built-in Administrator account is enable but i don't know the password of Built-in Administrator account. Is that possible to reset Built-in Administrator password?
View 2 RepliesHow To reset password Run administrator?
View 2 RepliesIf I boot normally, all three accounts, including the built-in Administrator account become Standard accounts, even though they were all setup as Administrator.
If I boot to Safe mode or Safe Mode with Networking then they all are Administrator accounts.
Right now I'm running Windows Repair All-In-One. Will see if that works.
This computer also boots to a black screen two out of three times (not always though, sometimes more, sometimes less.). If WRAIO doesn't do the job I'll tray a Refresh. If no joy there then I'll clean install. I have a good Macrium image backup so won't lose anything no matter what I do.
I need to either re-set the password for my administrator login, or, create a new administrator login. But, how can I do either without the ability to authorise it?
View 5 RepliesSince I refreshed (factory restored) my win10 home laptop, it wants to creates admin accounts all by itself.
This happens every 2 or 3 reboots, and the admin accounts appear at the logon screen.
Before the refresh it booted to my log on. Now it boots to a list of accounts. First the inbuilt admin account appeared, which I tried to get rid of by the tutorial (net user administrator /active:no in elevated cmd).
Sure enough after a couple of reboots it was back again. I tried leaving it and after a couple of bootups, another admin account appeared, this time with a user name and password (the inbuilt admin account didn't have a username, just password).
I just upgraded my laptop from windows 7 to windows 10. Before I upgraded, my brother created an account for himself and windows 10 seems to think that his account was the main one. He didn't have administrator access, so now I'm locked out of everything that requires administrator access.
When I try to install new software, the security pop up happens, asking for an administrator password, but there is no field to enter a password.
I can't open the command prompt (windows -> cmd -> enter)
I can't switch accounts, logging out lists no other accounts.
How do I get administrator access back, and how can I make windows stop thinking I'm my brother?
I recently upgraded from windows 7 to windows 10. I didn't realize it was going to mess with my log in credentials just to get into my PC. Well, I'm locked out of my PC. I can't log on, it just tells me when I enter in the PIN and the Password that "Your device is offline, please enter old password." I do that and it rejects it.
I can't get internet access because I live on a college campus and the way they have it set up is you have to be logged into your computer before you can access the network.
I tried "resetting my PC" and chose the option to delete all the data but no idea if that will work yet.
I also tried reinstalling windows 7 from the CD, but I can't seem to get it to do that since I can't log in and get any kind of interface. I tried using the boot menu to boot from the CD (it's a retail version of windows 7.) but that doesn't work.
What do I do here? Is my computer bricked? This is ridiculous.
I'm using Administrator account on my PC, when I click on "Create a password reset disk" nothing happens, what's the issue? or again it's Windows 10 thing!!
View 9 RepliesI installed Windows 10 from Windows 7, and now I can't open Settings using my account (which is an administrator account). I apparently have to use a different account, but I don't have one, and with no access to Settings, I can't make another account. I tried booting into Safe Mode, but I couldn't create an account there, either -- I clicked "create new user in PC settings" (or something along those lines), but nothing happened.
View 5 RepliesThe firm in which I work has a Lenovo PC with Windows 10 installed. There are two user profiles on the computer, the admin and another normal account without administration rights. We have only the password of the account without administrator rights.
The network administrator had left the company surprisingly in without giving the administrator password of the PC and we cannot contact him anymore.
Now we want to install another programme and we cannot do this without an administrator account.
I disabled secure boot and have tried to boot the PC with an Linux USB Stick, but it do not boot from the stick.
how I either can reset the password of the administrator account or create an new account with administrator rights.
Ok so i am furious with Micro$oft now! the other day i was FORCED to change my microsoft account after much nagging i did so and i dont like changing logins too much. (this was a week ago)
now for some random reason on earth without my permission my windows login also changed login passwords to the microsoft account. I DONT WANT THAT! that password is too long and complicated for someone who locks his computer every 5 minutes or so. why did this just kick in now? i changed M$ account pass over a week ago and today it decides to change windows login?! can i change JUST my local windows login separate from microsoft login?
if i try to change pass from settings it it goes online and says you cant use password that has been used before.
after an update at starting, tablet laptop start gives picture/clock screen, that slides to the password screen but when password block is touched on screen or mouse clicked the screen flips back to the picture/clock ... how to deal with this kind of lock out that the typing box won't open and loops to clock screen? have turned off for an hour to see if that does it..but if not...would restarting into a repair or recovery be possible fix...i have never been able to get into safe mode without being logged in but have gotten into recovery during a restart which made me wonder if entering a recovery during boot and reversing the upgrade was possible if all else fails...
View 1 RepliesI don't know if it's my installation, but I can't really switch to select a differet login user once I turn on my PC, and it brings to the last logged on user and his Picture password screen.
Both users have a Picture password and I don't have any chance to pick the other one, unless:
- I select a different type of access
- ask for password
- then the damn multi-user LH box appears
- and I can pick another one.
Then do the opposite until I get back to his Picture password screen. Odd and unbelieavable, considering how well streamlined in Win8.1...
The old way I found for Windows 8.x (HERE) is not working anymore, as I went in the Registry of mine upgraded Win10 and found it was already correctly modified (=1), but the login screen is a mess, nonetheless.
I'm ok with Task scheduling batches, reg modification, whatever. But it's Win10 Home, so no gpedit involved..
(it's a Dell Venue 11 Pro)
Like the title, I forgot the Administrator password. (I don't have any other Administrator accounts)
View 3 RepliesAfter I had installed Windows 10, I restored some backup files I had from another computer using Windows 7. When I tried to access the files, I was told that none of my software could load the files. After doing some research on several of the Windows forums, I found out the account I had been using from the very beginning was not the "real" Administrator account. As such, I could not change any of the User Privileges. Research again indicated I needed to "activate" the EUC Administrator, which I did.
However, I was never asked for a Password when it was activated. Now, when I try to access the new Administrator account, I can't get past the Logon screen as I do not have a password. I have tried ALL the passwords I can remember from both the current Windows 7 and 10 User/Administrator accounts on this and the other computer, all to no avail. HOW do I either determine what the "default" password is or how do I change the "default" password without knowing what is in the system right now?
I have a PC running Windows 10 on which the Administrator Password either has been lost or changed. How do I go about either resetting the Administrator Password or formatting the drive and starting over?
View 1 RepliesI have a Laptop (Windows Home 10) and a Desktop (Windows 8.1 home) and I want to enable Administrator on both. I have used all of the suggesting about this I got on the internet and nothing works.
View 7 RepliesI have encountered many problems to come as I learn Win 10. The first of which is how can I change or edit the administrator's name on my PC. I thought like win-7, I could edit, change, or even turn off password protect.
I find no way to do this, as I'am the only one using my PC, I do not need to sign in with a password every time I fire my PC up. Normally I resort to system restore for most problems, however I don't think that would work in this case.
I recently downloaded Windows 10. For some reason, my account on the computer --which is the only account on the computer-- is a 'standard account'. Because of this, I can't download or make some important changes that I need to make. I admit that I'm not computer savvy, but I've tried a few things. I've tried activating the 'hidden' Windows 10 administrator password but I can't because you have to run the cmd as an administrator to do this [when I try it doesn't give me the option to click yes]. I also tried adding family members to my account in order to make those accounts administrators. I created new email addresses, send the invitation, and accepted the invitations, but every time I log on to my Microsoft account, it still states that they invitations are pending.
View 2 RepliesI have purchased a laptop from a friend. Just prior to my purchase Windows 10 got loaded. The compter has one account which is an administrator account. I think that the same account information is used as a login to Microsoft. I would like to remove the account and substitute my own administrator account. How do I do that.
View 2 RepliesI am currently on a different computer than the one where I am locked out of the Administrator account.
Less than 3 weeks ago, I bought a new laptop that came with Windows 10 installed. When I finally set up the new laptop and tried out Windows 10 for the first time, I was annoyed at the whole thing with Windows blocking some programs from being installed and a lot of other annoying prompts. This is when I found out about a higher level of Administrator access known as a Super Administrator to avoid most of these prompts, and install programs without being blocked by Windows. So what I did created a new user account with the Command Prompt and gave it Super Administrator access without setting a password. Once I logged into my new user account, I deleted all of the other user accounts on my computer, since I had no need for the other user accounts (such as the Guest account).
The real trouble happened when my computer crashed and experienced a BSOD. After the computer rebooted from the BSOD, I found out that I could not log into the Administrator account because it prompts for a password, but I never set up a password for the account. Inputting no password does not work. I am not sure how a password was set up on the Administrator account without my knowledge and whether this might have been related to my BSOD crash.
I have made an attempt to get back into my only user account, but nothing has worked so far. All of the built-in Windows diagnostic tools have failed to work, since they all require that I log into the Administrator account, which I am unable to do. My original plan was to use the option to reset my PC that lets me keep my files, but that won't work without having access to the Administrator account. What password is on my Administrator account considering that I never set up a password and somehow the account now has a password on it. How to get back into my Administrator account?
I have been using Windows 10 for last 2 months and i had no issues with update but few days ago i had a problem with opening applications . It says "App cannot open ,you're using inbuilt account sign in with Microsoft account " something like that so i googled about this problem and i have followed all steps but accidentally i deleted the local administrator and now I can't sign in into my pc , i know my password and pin code but it says "Your password was changed on a different device.You must sign in to this device once with your new password,and then you can sign in with your PIN " ...
View 3 RepliesUpgraded my laptop W7 Home Premium (64-bit) to W10 Build 10586. Created a Microsoft account based on e-mail ID. Change my mind and removed MS account in favour of the Administrator account (with password). All attempts to use standard apps (Mail. Edge etc.) give message "xxxx can't be opened using Built-in Administrator. Sign in with a different user account." When I try to create a new MS account using Settings >Accounts >Your emails and accounts >Add email, calendar, contacts account or >> Add workplace or school account, or >> Other users (Family and other users isn't shown) >Add someone else to this PC, the system just hangs with the infuriating revolving circle. Found some complex solutions with recovery images and registry editing.
View 3 RepliesRecently I had to make a change in my computer that required the Elevated Administrator account to be used. I finally figured out how to open that account, did my thing, shut down the Elevated Administrator account, and returned to my standard account. Then I discovered that I must have done something else while in Elevated Administrator mode because after that I could not install or uninstall any program, could Not access System Configuration, could Not access Safe Mode (used the shutdown /r /o command. When I got to the selection window and pressed F4 I waited for 45 minutes with no Safe Mode result), cmd -> "run as administrator" does not work. When using the GUI to work on this (open Elevated Administrator) I get "To continue, type an administrator password, and then click Yes." But there is no place for a password and the Yes button is not active. When I use the command prompt I get an Error 5 message.
View 9 RepliesIt seems now that every time I run or delete an EXE file, the system makes me type in the password for the Administrator; especially as I typically do stuff in the dark, having to locate the keys for my password is a real pain. Now, I don't mind having that dialog box come up and making me simply click on the button (or hit Enter, etc.) In fact, if this is something that can prevent "drive-by" downloads or other nefarious stuff from happening, I want it (although I still mind typing in the password). In Windows 7, the system behaved in this latter way, and I'd like Windows 10 to behave in the same way.
View 3 RepliesAfter installing Windows 10, I changed my Administrator account password, losing my EFS-encryption on some system files.
I didn't read the fine print:
Now, I can't downgrade because it keeps giving me the error when trying to downgrade that I need to remove the Administrator (even though I de-activated it through net user Administrator /active:no).