Accounts :: Set Up Admin Account On System With Standard Account
Nov 12, 2015
How can I create an admin account on a system that only has a standard user account? I suspect that the answer is that I can't, but I live in hope.
I can't provide specific details of the PC in question because it's my son's, and he lives 35+ miles away. He was running Win 8.1 but recently (in the past couple of days) upgraded to 10 and has run into a driver issue. He can't upgrade the driver because he doesn't have admin rights. I think he has an admin account on his system because I put it there, but it doesn't show up as a log-in option.
I've tried to enable the hidden admin account from a standard user acc on my system by running the command prompt as admin but am always to verify as admin - catch 22..
I recently upgraded a HP computer from Windows 7 to Windows 10 pro using the Windows update/free Upgrade.
How can I change my childs admin account to a child account? The account is registered With a Microsoft account and I have added my Microsoft account as a second admin on the computer.
The firm in which I work has a Lenovo PC with Windows 10 installed. There are two user profiles on the computer, the admin and another normal account without administration rights. We have only the password of the account without administrator rights.
The network administrator had left the company surprisingly in without giving the administrator password of the PC and we cannot contact him anymore.
Now we want to install another programme and we cannot do this without an administrator account.
I disabled secure boot and have tried to boot the PC with an Linux USB Stick, but it do not boot from the stick.
how I either can reset the password of the administrator account or create an new account with administrator rights.
If I boot normally, all three accounts, including the built-in Administrator account become Standard accounts, even though they were all setup as Administrator.
If I boot to Safe mode or Safe Mode with Networking then they all are Administrator accounts.
Right now I'm running Windows Repair All-In-One. Will see if that works.
This computer also boots to a black screen two out of three times (not always though, sometimes more, sometimes less.). If WRAIO doesn't do the job I'll tray a Refresh. If no joy there then I'll clean install. I have a good Macrium image backup so won't lose anything no matter what I do.
My girlfriend set up an admin account to block certain websites from me. I idiotically deleted that admin account. Now I am unable to do literally anything without permission from a nonexistent account. Every time I try to run ANYTHING, it grays out the "yes" option and tells me I need to enter the administrator password. I can't even run the command prompt as an admin. When I try to do the "net user administrator /active:no" command, it gives me a system 5 error. I can't restore to a time before she ever made the admin account because it needs permission. I can't reinstall Windows because to run the tool to make a bootable USB, I need permission. And there is NO ACCOUNT to get permission from anymore.
I decided to give new Windows 10 (it picked Home Edition by itself) a try. Previous version was Windows 7. After a flawless install I have seen that something on my C: partition is using a lot of disk space. It was Windows.old file which I have successfully deleted by using Disk Cleanup. But last night I see Windows.old has reappeared back, which is quite a surprise, so I wanted to delete it again.
But now UAC blocks my every effort because User Account "doesn't have Administrator permission". The Yes button in the UAC is greyed out, I can only click No which leaves me where I was. The Account is reduced to what appears to be Guest. Naturally, I ended up more or less completely cut off from making any serious alteration to anything. I can't delete folders of importance, change account status (back to Admin), nothing.I can only use the computer.Another issue is that my otherwise empty D: partition has 3 files (one of them is named "WindowsImageBackup"), they together take more than 100G of hard disk space. As a Guest it's impossible to open or access them to see what's in them, let alone delete them.
I know that Win 10 is supposed to delete Windows.old by itself after 30 days (I hope "WindowsImageBackup" too), but is there any way for me to solve the issue of account status - to return to Admin - and do it by myself alone as soon as possible? It all seems like some bug or something, it's quite frustrating and I tried to do a Repair Install, but as a Guest you're pretty much stuck.
I would like to use some of the features that require you to log in with a Microsoft account rather than my own local administrator account. But when I did that, it totally changed my settings for my local account including desktop, etc. So I deleted the Microsoft account. how to keep my local account settings when signing in with a Microsoft account.
I upgraded my windows 7 to windows 10 my dell insperion computer. the original conversion to windows 10 seemed to go OK for a few days. The about 2 days ago, I created a MS user account to access some of the MS store apps. Now the original Windows 7/10 user accounts - local accounts i guess - 3 of them - that we signed in with have been replaced with 1 account - I believe to be the Microsoft account (different name and password).
When we sign in with that MS account and get in to the computer, we have a pop up box that says "Critical Error - Start Menu and Cortana aren't working. We'll try ti fix it the next time you sign in." We can't do anything but select the pop-up box option of "sign out now". When we sign in again, it is the same thing.
I'm not sure if this is 1 problem or 2 different ones.
1. How do I get back my initial local user accounts, so I can access all of my programs and files? 2. How do I fix the Critical error?
I've been using Windows 10 for weeks. Until today, it started up just fine by displaying my name and no email address. This is exactly how I want it to be.
Today when Win 10 would not recognize a printer, in order to download an "app" to work with this, I was required to provide a Microsoft email account, which I did (an old Hotmail account I rarely use). Now when I restart or wake up the computer, that old Hotmail account appears as "Administrator". However, I do NOT want that old Hotmail email address associated with this computer.
How can I remove it and get back to logging in with NO associated email address?
NOTE: I do not want to delete the old Hotmail account; just want to remove it from my Windows 10 "Account" menu (My name + Hotmail address + "Administrator").
In case it's required to associate Win 10 with an email address, I use Windows Live Essentials with a company email address. I tried adding it via the "Other Account" option, but Win 10 said it did not recognize the email address I entered, sigh.
I had hoped Windows 10 corrected the "rename user account" function but nope. I renamed a User Account due to conflict on the LAN [same name, same spelling] and sure enough, now I have two names for the account, one a slightly hidden original name, and permissions issues. To rid it, I will create an all new Administrator account, move everything over, and demolish the old. How to do? the docs/files are easy... the settings for apps etc are not as I recall
So the other day I noticed my only account on my laptop had lost administrator privileges. I looked up how to fix this and went about doing. I booted into "safe mode with command prompt" but that realized I didnt need that, just regular safe mode. I turned off my laptop, and turned it back on expecting a normal boot.
When it boots up, it goes straight to the windows login screen for "administrator". No matter how many times I hit ok it doesnt do anything or will start to load but eventually come back with, "account has been disabled. Please see system administrator". As of right now, that's all I can do with my laptop, so its pretty much useless to me. Is there a way to boot into safe mode using the power button or holding an F# key?
The Win 10 is sitting with only an admin account. Try to add "other users" and nothing comes up. Tried to reset PC and it did not complete. Found error and backed out. P17RunE.dll shows as missing upon start up.
I deleted my admin account by mistake. In this case, my computer does not allow me to make any changes to the computer, including updating the anti-virus software.Since I'm using dell laptop, there is no original disc going along with my pc when I bought it. I would like to ask if there is any ways to recover the admin account?
i have a clean install of windows 10 pro, before i had a windows 7 and was using the built-in administrator account without problems.
Now in windows 10 i'm using the built in administrator account but facing problems
1) if i leave the "security settings==>local policies==>security options==> User Account Control: Use Admin Approval Mode for the built-in Administrator account==> disabled" as it is the default option i can't run the new windows programs like settings, edge... etc.
2) if i change User Account Control: Use Admin Approval Mode for the built-in Administrator account to enabled, i can't install certain programs and also i have to run some applications as administrator (which i don't want to do for every application and that's why i use the built-in administrator account), to get full access to the windows drive "c:" and it's subfolders.
When I first bought this laptop I was able to use MS Edge, MS Games, etc. I didn't like having to sign in every time I sat down since I was the only one that uses it, so I disabled that feature. Now, I've decided I'd like to use them. So, I went in and added my pswd, and I even added my PIN, but it still won't give me access to those features.
I have two accounts on my Win10 device. A User account, which works fine, and an Administrator account, which has a problem: when I try to log into the Admin account, the screen I get is totally black. I can Ctrl-Alt-Del to bring up task manager, and from there I can launch things, but when I launch explorer, no joy--the screen remains black.
The funny thing is that this does not happen in my User account.
NOTE: I did not see this behavior before I installed today's (Tuesday's) update for Windows 10.
Details: Machine is a Lenovo X140e (AMD quad core) with 8GB RAM and a 256GB SSD. Windows 10 Professional 64-bit.
It does make certain things that I'd like to do considerably more difficult...
I have a strange issue in Windows 10 Pro (Dutch). With my account (in Administrator group) I cannot start apps like 'Control panel', 'Paint', etc from the start menu. When I click just nothing happens: no window, no message, nothing. Only via desktop As Administrator works. Also apps like Bit Defender Security doesn't start automatically.
I tried to create a new account, but same issues. But, when I startup with the build-in Admin account (I enabled it temporarily) and switch to my own account (with Admin account open) everything works well! I expect that the issue is related to access controls or something.
My system: Intel Core i7-6700K; Asus Maximus VIII Ranger motherboard, Corsair Vengeance LPX Black 16GB DDR4-2666 CL16 kit, Geforce 980Ti, Samsung 950 Pro 256GB (NVMe m.2 SSD). Windows is installed from scratch, no update, on the 950 Pro SSD.
Updated a family PC to Windows 10 a few days ago, all went smoothly. Mail and Calendar apps opened, worked and details were put in.
A day later, these two apps - and only these two - will not open. Whether this is clicking the tile, or the name in the apps list, or even getting Cortana to try and launch them, they will not start up. Windows 10 will not allow for uninstalling them. This only happens on one account of the several on that PC - it happens to be the administrator account.
I have another PC that went through the upgrade at the same time, no issues. Under Settings, the working Mail/Calendar app is displayed on that computer as 760 MB. On the 'troublesome' computer, the app is only 450 KB in size (I cannot remember the exact number, I'm not using it right now). I am aware there was a recent update and wondering if this is to blame for not fully replacing the old version or something.
I just upgraded a new laptop to Windows 10 with the latest build. Everything was great until I rebooted after uninstalling some bloatware and now I can't get back into Windows. The login screen comes up and the only user account (admin) is listed, but there is no where to enter the password. This has be baffled.
I've been trying to get into safe mode, but the HP Envy 15 that I'm using doesn't seem to want to let me do that.
This is my main PC where everything is set up as I want it (apart from a Start Menu App issue but that's another story), I have just added my account (that is on this PC) to my wife's laptop, I've entered my Microsoft log in and password.
I was on the understanding that all the Apps and settings from my main PC would migrate to the laptop, this has not happened which seems pretty useless to me.
My theme and favourites have migrated over but not the apps, if this should work or Is it another Windows 10 failing?
I recently downloaded Windows 10. For some reason, my account on the computer --which is the only account on the computer-- is a 'standard account'. Because of this, I can't download or make some important changes that I need to make. I admit that I'm not computer savvy, but I've tried a few things. I've tried activating the 'hidden' Windows 10 administrator password but I can't because you have to run the cmd as an administrator to do this [when I try it doesn't give me the option to click yes]. I also tried adding family members to my account in order to make those accounts administrators. I created new email addresses, send the invitation, and accepted the invitations, but every time I log on to my Microsoft account, it still states that they invitations are pending.
The last update triggered (13-01-2016) the loss of access to the start menu, many apps, as well the apps store and MS Edge. The exact same thing happened with the first version of Win 10 Pro received as an upgrade from WIN 7.
This time, as soon as build 1511 was received, I immediately created a ISO USB stick and then proceeded to use the machine as normal. At some stage, I created a Local Account with Administrator rights as I am the only user of the PC.
After the January upgrade, I can no longer switch back to the MS Account as the screen where one is supposed to be able to do this under [settings/accounts/Your email and accounts] does not load anymore, thus removing the option to switch back to a MS account. The screen is just blank.
I ended up activating the in-built Administrator account so that I could try and see what was going on.
I now notice under C:users the following user folders:
(1) Administrator (2) Default (3) Default.migrated (4) DefaultAppPool (5) My Name ---- I presume this is the user profile for my MS account? (6) My Name (Local ----- This is the created local Account
yet the "name of the account" when I log in has been truncated to My name L
Is this why the settings page for accounts cannot find the profile information which will allow me to switch back to my MS account?
I feel I have to unravel this mess before going any further in trying to establish why the start menu and all the apps have now "dissapeared"
Of course I can just redo the clean install but I feel I should first sort out the user profiles before going any further.
