I occasionally use the Hidden Administrator account for security problems, stubborn undeletable files, etc. Question is can I use the User Profile from my W10 install on the Hidden Administrator? If yes, how?
View 1 Replies
Upgraded to W10 from W7 several months ago now and activated and used only the built-in Administrator account. Which is what I have done for many years now to stop the UAC popups.
However, I have soon discovered this Administrator account, while blocking the UAC popups has some serious limitations. Like cannot run Edge or any of the Metro Apps. Yes, I have tried the workarounds but they too have issues.
So how can I transferred all my settings for my programs and windows to another local username?
Recently I had to make a change in my computer that required the Elevated Administrator account to be used. I finally figured out how to open that account, did my thing, shut down the Elevated Administrator account, and returned to my standard account. Then I discovered that I must have done something else while in Elevated Administrator mode because after that I could not install or uninstall any program, could Not access System Configuration, could Not access Safe Mode (used the shutdown /r /o command. When I got to the selection window and pressed F4 I waited for 45 minutes with no Safe Mode result), cmd -> "run as administrator" does not work. When using the GUI to work on this (open Elevated Administrator) I get "To continue, type an administrator password, and then click Yes." But there is no place for a password and the Yes button is not active. When I use the command prompt I get an Error 5 message.
View 9 RepliesWindows is frustratingly taking up all of my time and I have tried everything google has to offer to try and fix it but it seems like no one has screwed up as much as I have on whatever forum.I'm trying to set my account to administrator because I can't install programs, change account settings, make any changes through CMD without getting the system error 5 access denied message and I can't set the administrator account through CMD either. I also don't have the permission to change anything in regedit and I can't even reset my pc because it requires an administrator password which I don't have, is not "nothing" nor is it administrator or admin or password and I can't change it through cmd either.I can't even access the administrator account because it is disabled and even with an elevated cmd I can't activate the "hidden" administrator account.
View 9 RepliesI started a clean install yesterday and after today I am trying to install another user profile.
I went to settings; Accounts; Family and other users; Add someone else to this PC; and all I get is "Something went wrong".
I was wondering if I could use the premade admin account for my everyday one but I am not sure if it's safe to, or if not how could I make another user the overall admin?
View 9 RepliesFor one reason or another I managed to delete administrator privileges for my one local account. After several hours messing about I have managed to activate the hidden Administrator - but I am finding that this Administrator is not working.
1. It cannot see my main local user account. It does not list it at all in User Accounts, so I cannot change any settings etc. Similarly, when I open User Accounts with my main account, it cannot see the Administrator, or the new account I created (see below)
2. When I access User Accounts using "netplwiz" it sees my main account but will not highlight it (or any other account). It is stuck on Administrator.
3. It will not create a new account. When I use it to access Accounts and try to add a new user the cursor spins and nothing happens.
4. I added a new user (with administrator privileges) using the command prompt - this was successful, but it bumped my main account off the login page, and it doesn't acknowledge it on the dropdown list with the start menu. (Yet when I restarted it took me straight in to my main account.)
When I try to login, I get the following error message:"The User Profile Service service failed the sign-in.User profile cannot be loaded."I am literally unable to use my HP Envy laptop, which is running Windows 10, because of this. I do not even know how to get into safe mode. Though I haven't found safe mode yet, I was able to access system diagnostics via Escape (while rebooting). I tried to do a system restore, but it said I had errors on my hard drive and made me check and fix those errors.Next I tried Recovery Manager. But this just gives me a blue screen. Nothing comes up.
View 4 RepliesI just tried to log in to my Admin account and got the error "The user profile service failed the sign-in. User profile service cannot be loaded".I can log in to my user account and do admin tasks when prompted by UAC. SFC /SCANNOW shows no errors and CHKDSK shows no errors.I did a system restore at boot and can now enter the admin account but it has several access errors. I changed another user account to an admin account and that works. However, if I create a new admin account, I get the same error "The user profile service failed the sign-in. User profile service cannot be loaded".
I'm unsure how to proceed from here. Should I do an in place repair install or is there another fix? The fundamental problem is I can't create a new working admin account.
I am running Windows 10 onmy HP Pavillion. I upgraded from Windows 7 around a month ago. Recently I was running a disk battery calibration check and after I restarted from that I get the message when I login that the "User Profile Failed the Logon. User Profile Cannot Be Loaded". From everything I have seen online it sounds the best method is to login under safe mode as an admin and either create a new user profile or repair the current one.
Now the problem is when I go to advanced startup options and select safe mode, it starts up but then asks me to login using one of my two accounts. Neither is the administrator as this doesn't show up for me. The current account that I am getting error obviously won't work under safe mode and the other account I don't remember the password. I inserted a travel/jump drive to try and change the PW on this but it wouldn't work. So basically I have no way of getting to start it up as an administrator. The local PC place said WIndows 10 has had known issues with this. However I had this problem happen with Windows 7 too so I am not sure.
Upgraded my laptop W7 Home Premium (64-bit) to W10 Build 10586. Created a Microsoft account based on e-mail ID. Change my mind and removed MS account in favour of the Administrator account (with password). All attempts to use standard apps (Mail. Edge etc.) give message "xxxx can't be opened using Built-in Administrator. Sign in with a different user account." When I try to create a new MS account using Settings >Accounts >Your emails and accounts >Add email, calendar, contacts account or >> Add workplace or school account, or >> Other users (Family and other users isn't shown) >Add someone else to this PC, the system just hangs with the infuriating revolving circle. Found some complex solutions with recovery images and registry editing.
View 3 RepliesBelieve I have a corrupt user profile as newly installed apps not appearing in desktop programs menu, so decided to create two new profiles one final and one temporary, using the copy to procedure built into Windows, but used Windows enable app to allow copy to to work.....got an error message at the last step with a pop up windo telling Windows could not delete the folder..
View 1 RepliesAfter I had installed Windows 10, I restored some backup files I had from another computer using Windows 7. When I tried to access the files, I was told that none of my software could load the files. After doing some research on several of the Windows forums, I found out the account I had been using from the very beginning was not the "real" Administrator account. As such, I could not change any of the User Privileges. Research again indicated I needed to "activate" the EUC Administrator, which I did.
However, I was never asked for a Password when it was activated. Now, when I try to access the new Administrator account, I can't get past the Logon screen as I do not have a password. I have tried ALL the passwords I can remember from both the current Windows 7 and 10 User/Administrator accounts on this and the other computer, all to no avail. HOW do I either determine what the "default" password is or how do I change the "default" password without knowing what is in the system right now?
I have always used the hidden administrator account by default since about 10 minutes after I installed windows on my own PC for first time.
It's ridiculous how limited one is without it and I consider it a must-have feature for day-to-day operation within windows - especially true within the freaky, controlling environment of Windows 10.
Anyway... It doesn't work in W10... I can enable it as usual via an elevated command and can log-in to it just fine... but Windows doesn't seem to care either way and constantly asks me to provide administrative permission for silly things like renaming a shortcut... (sigh).
I am also getting far to many "You don't have permission" sort of errors that make me want to throw my PC out of the window.
I believe the account is enabled and I am using it exclusively...
I inadvertently deleted my mom's user profile. She lost all of her pics and documents. I don't think the pc has been backed up in ages. Is there a way to restore her information?
View 1 RepliesI have 6 user profiles on my Windows 10: One is 72.1GB in size, another is 39.0GB in size, one has a ? mark, one is 58.2GB and one is 11.4GB. The smallest one is the Default Profile at 2.12MB. Why my user profiles so enormous?
View 1 RepliesI just upgraded from Windows 7 to Windows 10 using the free upgrade. Initially during the upgrade and configuration, I was using my account or profile. However, didn't see my wife's account at login. After install and setup was complete, I was updating a few programs out of date due to the upgrade, restarted, and at login only my wife's account was present. No option for me to login. I looked in the Settings/Accounts/Family & Other users and there isn't anyone else listed except her.
I still have a file under users on the C drive but not sure how to fix this without having to create a new account. There is also a profile for my account under System Properties/ User Profiles. During initial setup when I was logged in, my desktop setting were exactly how they were with Win 7. So, no clue as to why my login profile is no longer available for login or user switching.
The user profiles which came across with the upgrade work perfect but when I decided to create another user profile and login, I cannot click on the Start menu button as it does not work!
I have had to use the command prompt logout.
I think when windows is creating a new user profile, it is not creating all the correct files but could be wrong!
I get an error "The user profile control failed at login"when trying to login for the first time to a newly added family account. I accept the invitation from another computer but get the error when trying to switch to the new profile. This account runs fine on another computer. I deleted this account from this computer using Windows 10 because windows mail stopped working. Now I can not reinstall the profile.
View 1 RepliesAs an administrator, I thought I was telling Windows to allow me to show hidden files for all files under a given user. Turned out I made them hidden.
Questions...
How do I view hidden files. [URL] doesn't seem to be correct as I do not even see the typical "Windows" start icon.
I am currently setting up an image for a small business. The image is Windows 10. I have the admin profile all set up the way I want the other profiles to look, after sysprep has been ran and the oobe crap has worked.how do I get the standard default profile to look the way I have my admin profile? I have a custom background with the company logo, a few changes to the start menu and taskbars, and some desktop shortcuts.
View 2 RepliesI deleted my account on accident and now my start button won't work. How do I restore it? And I just updated it to window 10 yesterday and today it said that I was logged in as a temporary account so I tried fixing it but deleted my account what to do? I think I deleted my administrator account.
View 1 RepliesI need to create an admin account in our home computer, but it needs to be a hidden account. Is it possible? I have access to everything in the computer, and I also had replaced the utilman.exe with the command line, to use it on the system startup.
I'm trying to create a viable family monitoring system in the computer, I managed to install the software called [key logger removed by admin] to remotely check on the computer, and now I need to create a hidden account.
By hidden I just want it to doesn't show on the windows startup, but if I can log in through it, of course. Just to hide it from the list where all the other users appears.
Since yesterday, I'm unable to switch between user accounts. Button changes from white to blue when hovered, but no response to click.
View 1 RepliesIve upgraded from Win 8 to Win 10.
I had 2 adult local accounts and 2 kids local accounts. I also have the 1 Microsoft account.
I don't want to use the Microsoft account signin on my laptop I want to use my local.
Is there a way to assign the existing local kids accounts to family without having to create new ones ? The kids are worried that if I do this they will lose their existing apps/game settings on the local accounts.
I've got two computers running windows 7. Both have an administrator account and a standard user account. The computer I use for gaming has a third account for gaming (I have some older games that don't like the aero-peak feature so the gaming account uses a plain desktop, no features.)
All these accounts use the same email address.
All these accounts will also use just the one Microsoft account.
My question is, when I upgrade to windows 10, will I be able to create a similar set-up for the user accounts, ie 5 different accounts, but only one email address and one Microsoft account? I've read that windows wants an email address to create a new account, is it going to tell me "that email address/Microsoft account has already been used?"
I am planning to upgrade to windows 10 by doing a clean install and starting from scratch, so I'm not worried about whether or not the existing accounts will transfer over.
