Acer Aspire 7745G Going In To Sleep Mode Whatever Settings Used
Aug 15, 2015I set the screen sleepmode to 2 minutes and that works but 1 minute after that the computer goes in to sleepmode. Why?
View 1 RepliesI set the screen sleepmode to 2 minutes and that works but 1 minute after that the computer goes in to sleepmode. Why?
View 1 RepliesMy Laptop will not sleep. It's an Acer Aspire 5250 Series Laptop. Below is the screenshot of the issues that I have ran and found from Command Prompt.
View 9 RepliesI have an Acer Aspire 7750g laptop for like 5 years now. Updating it's graphics card would result in having lines randomly flicker all over the screen horizontally. This is the reason I did not update it's drivers. Now that Windows 10 has released, it seems to have update it automatically which is irritating. I've searched in the internet some ways to fix it and tried one of them: Underclock the Memory Clock by 50 MHz in MSI Afterburner. This did not work at all. What I have done is I have underclocked the Core Clock by 50 MHz aswell and still no result. I've kept these two that way and restarted my laptop to hope that this might fix it, I was wrong. Now I can't even boot into windows. This is what I get when I try to boot into Windows: [URL]
I have tried going into safe mode and that's where I get the BSOD that says Kernel_Data_Inpage_Error. I have also enabled the low-resolution video mode, still no result.What I could do is reinstall the operating system but I'd like to keep that as my last option as I do not want to lose my files and I don't know if my windows 7 key will be accepted while installing windows 10 from a flashdrive.
Acer Aspire 5943G upgraded from Win 7 to 10, Kaspersky 2015.
After tolerating a couple of glitches (track pad not scrolling, right speaker down, tiles at start menu not displayed, some icons not visable on task bar) I can now not boot up. The windows 10 logo appears with a rotating 'we'll get there sometime' device for a short while, after which the screen flickers black then grey/blue. It does not reach sign in, there is no cursor and it stays this way, although it will shut down ready for me to try again. I have tried hitting F8 during this but with no effect. F2 brings up set up, but how I can get back in to it?
Acer Aspire XC-603 computer came with Windows 8.1 ... Upgraded to Windows 10 Home around March 1, 2016 Version 1511 OS Build 10586.164 ... First crash came the next day after the upgrade, then around every two weeks.
View 1 RepliesFor the past few months, the right touchpad button does not work with the Windows 10 drivers. Windows 8.1 drivers worked fine. If I switch mouse settings to left handed, then the buttons work fine, but obviously this is awkward to get used to. I have rollbacked the driver to a very old edition and it worked fine, however then I had no synaptics touchpad settings so the touchpad settings could not be altered.
19.0.9.7 is the synaptics version
touchpad works fine on other user accounts
I have a problem with my Acer Aspire 5943G. I just upgraded from Windows 7 Home Premium OA to Windows 10 Home, and then updated Windows 10 until there were no updates showing. A couple problems appeared which I was able to fix but not a particular one; When I startup the laptop it all goes smoothly but when it gets to the login screen (clock with the background), my screen's backlight suddenly turns off.
I can still see the faint screen info if I shine a bright light in it. If I restart it, it fixes the problem though. This is rather frustrating as I cannot expect when it will happen (right now it happened when I turned it on from hibernation, sometimes it happens with a normal shutdown and startup). My GPU is ATI mobility radeon HD 5650. Also having a sound issue. I can get the sound to work through headphones, but not through the speakers.
I have an Acer Aspire laptop that used to have Bluetooth on it. I just recently noticed that all evidence of Bluetooth has disappeared from the OS. The Bluetooth module that I am using is:
Bluetooth 4.0 + HS, the two drivers listed on the support portal for my model number are an Atheros Wifi/BT combo and a Broadcom. I can't tell since there since the OS doesn't see it.
First thing I tried is to download and install both drivers from the manufacture's site (Acer Support). Both installers did not detect the BT module being present and ended prematurely.
The computer is a Acer Aspire E15 with 4gb RAM and Amd E2 Chip. It was originally running Windows 8.1 but I recently updated to windows 10 and I got the Irql not less or equal bsod. I can't access anything because it just goes back to the bsod.
View 1 RepliesI've got a problem with my second laptop, acer aspire e15-551P. After I upgraded my windows to 10, voice totally disappeared also sound card cannot be found. Already downloaded and installed all available drivers from acer site. Still doesn't work.
View 6 Repliesrun down of errors when i try to do automatic repair:
1.Troubleshoot>Reset this PC>Keep my files> = error: The drive where Windows is installed is locked. Unlock the drive and try again.
2.Troubleshoot>Reset this PC>Removes everything>= error:Unable to reset your PC. A required drive partition is missing.
3.Troubleshoot>Advance options>System restore>= error: System restore: To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore.
4. Troubleshoot>System Image Recovery>= error:Windows cannot find a system image on this computer. Attach the backup hard disk or insert the final DVD from a backup set and click retry. Alternatively close this dialog for more options.
5.Troubleshoot>Startup repair>= error: start up repair couldn't repair PC. Press advance to try other options to repair you PC or "shutdown" to turn off your PC. Log file:
6.Troubleshoot>Go back to the previous build>= Windows ran into a problem and wont be able to take you back to the previous build. Try resetting your current build instead(Troubleshoot > Reset this PC).
7. Install>Upgrade>Compatibility report: The computer started using the Windows installation media. Remove the installation media and restart your computer so that windows stars normally. Then, insert the installation media and restart the upgrade.
8.Install>Custom> We couldnt find any drivers. To get a storage driver, click load driver
when trying to load the USB it says no signed drivers were found. Make sure that the installation media contains the correct drivers, and then click OK
I just want to get my laptop running at this point and probably go back to windows 7. dont mind losing my files cus most were backed up
I have installed intel's driver detection tool and it informed me that I have a custom driver installed by the manufacturer. Acer site scanned my pc and found new driver VGA 10.18.15.4248, which i downloaded but upon installation tells me is the wrong driver for my pc. I have upgraded(haha) from win8.1 to 10, not sure if this is part of the problem. This driver was released 7/15. I ran windows driver updater and it tells me the driver I have, the only one btw, is current. I have tried to contact both Acer and Intel and get no answers.
View 5 RepliesWhenever I connect my acer aspire v5 572 running win 10 connects to external media like printer or mobile .. It freezes and show me page fault in non paged area ..
View 1 RepliesI have an acer aspire v5 573g. I wanted to clean install Windows 10 on it. And every time I tried it gave me an error code : 0x800701E3. I thought it might be due corrupt instalation file or something. I tried other copies but it gives same error. I don't know what it means. I tried searching on the net, but I didn't find anything. I will also attach a photo which I took.
View 10 RepliesSo, I was chatting with Microsoft about an issue with OneDrive, and all of a sudden my computer crashes. The error says "KERNEL AUTO BOOST LOCK WITH RAISED IRQL". I have included the dump log in this thread.
DESKTOP-CS4PJG9-Sat_10_03_2015_121137_66.zip
My machine will go into hibernate mode, but will not go into sleep mode. I just want to be able to wake it with the touch of the mouse.
View 1 RepliesPower & Sleep settings won't save my screen brightness settings. On my plugged in HP laptop default the screen brightness is set to maximum despite making changes in the Power & Sleep menu screen. I've even tried creating my own Power Plan but the next time it restarts it changes to the HP recommended power plan which sets the screen brightness to maximum.
View 1 RepliesI have a HP Envy that is only 11 months old. I installed Windows 10 not too long ago and now I am experiencing issues with the sleep mode function. I have tried many other suggestions in power troubleshooter and other "fixes", but nothing is working.
Here's the issue. When my laptop enters sleep mode, I cannot wake it up. The keyboard is unresponsive with the exception of the backlight key. No matter what I do, I cannot wake it and this includes Ctrl + Alt + Delete. The power button remains lit, but the screen remains black and will not wakeup. The only way to fix this is to hard reboot the laptop by holding the power button down until it shuts off and then reboot it.
so im placing the computer in sleep mode sometimes it goes to sleep and then wakes up after 1 min or it just turns of the screens. i found it in the event viewer i think i turned of almost everything in device manager so that the devices can't wake the computer.
View 6 RepliesRunning a Dell XPS 15, (L502X). Upgraded from 7 to 10 Pro yesterday. Played around a bit with the new OS and then went off to other things. Laptop went into sleep mode after 15 minutes as it always has. But this time I couldn't wake it up. Required me to power off the unit, then power it back on. Same thing happens now each time the machine goes to sleep mode.
View 9 RepliesThe brightness in my pc cannot be changed so i searched the internet until i found a solution and when i did the instructions i found out that Sleep mode has been removed from my PC.
View 1 RepliesRecently, my Windows 10 installation started to give me BSOD's. Never after a fresh boot, but always (some time) after the PC has been in sleep mode.
Please see the attached files......
my computer is not going in sleep mode even my settings are in sleep mode.
View 1 RepliesSince I upgraded to windows 10 from windows 7 my pc every night wakes its self from sleep mode. I did the command prompt and it said a wake timer was waking my pc, I have been unable to find a wake timer. How to fix this?
View 3 RepliesIn Power and Sleep I have set sleep mode to be entered after a certain time. It does not enter sleep mode as set. If I ask it to enter sleep mode on the power down option it will activate sleep but when I return to the computer later it has already turned itself on.
View 3 Replieswhen my computer goes into sleep mode I have to turn it completely off and do a restart to get it going.
View 2 Replies