Activate Windows After System Upgrades?
Aug 14, 2015
how to reactivate my copy of Windows 10 if I make hardware upgrades that would make me need to format my hard drive (Motherboard, CPU, etc.). In other words say if I need a new motherboard down the road and once it is installed and I cannot boot into windows, how would I get my copy of windows 10 back after I format all the old drivers and such off and reinstall windows? Would I have to then buy a whole new copy? The only thing I could think of would install my version of windows 7, activate it, then upgrade back up to 10.
View 1 Replies
Similar Messages:
Dec 14, 2015
I recently bought a HP Envy 17t with Windows 10 64 Bit on it. The first thing I did was to check if any updates were available, there were, and I downloaded and installed them. I checked again about 10 after that (about 2 weeks after getting the laptop). Since then however I can't install any upgrades. I start the download/install process, then leave. When I get back a couple of hours later, I see an error message saying that the MS servers could not be reached.
I don't know what's going on here. I haven't been able to download and install any Windows or MS Office upgrades in over 4 weeks.
View 1 Replies
Jan 7, 2016
I've been reading in the tutorials how to relocate the user folders and what you need to do in order to upgrade the system. As I have my user and programs folders in another partition (which I consider is the best way due to the malfunction of windows OSs) some updates and upgrades cannot install. From my point of view I find it quite disappointing, windows 10 is supposed to better than older windows, and apparently they do not consider that nowadays hard drives are around GB or TB and a lot of the users move the users and program folder due to security.
So at this point, I wonder if there's another way to say to windows or windows update that my folders are in another partition, like creating a kind of link that redirects windows update where it should. When windows update enters in C to look for users files, could it be posible to redirect it to the correct path (D: for example) and avoiding to relocate all the users files again to C.
View 1 Replies
Aug 31, 2015
I recently upgraded my CPU, Motherboard, Ram, and HDD to SSD. I upgraded my genuine copy of windows 8.1 to windows 10 about 3 weeks prior. I didn't want to install windows 8 all over again only to then have to update to windows 10 right after. So I just cloned my HDD onto my SSD. It worked fine for a day, but now its telling me I need to activate windows.
What do I do, is there any way to activate without having to reinstall windows 8 then upgrade to windows 10? I know my windows 8 product key will not work.
View 1 Replies
Feb 4, 2016
So i have 2 hard drives. one is an old one with windows 7 still on it, and the other was new with nothing on it. I took out the old one with windows 7 on it but didn't wipe it, and put in the new one. I installed windows 10 on the new one via bootable usb. Now windows says it can't activate. I've already downloaded 100gb of games and i REALLY don't want to do that again.
How can i get the new hdd to activate windows without wiping it? will the product key be the same for both versions? Can I update the old drive then swap it out with the new one and it be activated?
View 1 Replies
May 13, 2015
Can i use a new windows 8.1 pro key to activate my windows 10 pro preview?
View 1 Replies
Feb 26, 2016
I need to re-activate Windows after a hardware change and was wondering if I could purchase an OEM license and use the key it gives me to activate it? I'm aware that using an OEM key means there will be troubles upgrading in the future, however I don't plan on changes for quite some time. Bottom line: Could I buy an OEM Windows 10 and go into the store, activate it and have it work?
View 1 Replies
Sep 14, 2015
If I understood this : clearly, then does it mean that Windows will activate itself from some Windows activation servers that are somehow written into my hardware even if I do a clean install deleting everything in my Windows partition?
Also, since the built-in "Create a Recovery Drive" will take forever or display an error when ''Backup system files to the recovery drive' is checked", I'm trying to create an Installation media. But I'm stuck with which ISO I should download. Now, there's Windows 10, Windows 10 Single Language, Windows 10 Home, Windows 10 Home N. I'm running Windows 10 Home at the moment. Which was upgraded from Windows 8.1(I think there was ''Single Language'' written after "8.1", not sure though). Which Version should I download. And if I install the wrong version by chance, will Windows still activate after I find out and install the right version? Please clarify these.... I'm really looking forward to do a clean-install to get rid of all the errors and bugs with drivers and just start over.
*DETAILS: Windows 10 Home Build 10240 [Upgraded via free upgrade, had an OEM version of Windows 8.1 when first bought]
View 8 Replies
Nov 25, 2015
I have a watermark that says, "Activate Windows Go to Settings to activate Windows". I upgraded from windows 7 and then I replaced my cpu and mother board a month ago and now this message appears and I do not have a product key to activate it with.
View 4 Replies
Dec 23, 2015
i got a brand new computer recently that came with windows 10. i had to reinstall it a few times because of issues i thought were related to the installation (plus the first attempt asked me for a key which i didn't have, the second one didn't). i didn't activate right away. i got two BSOD in 24 hours and thought it was my computer but found out online that it's windows 10's fault so i went to update windows. the update i got took so long it almost looked like a whole new installation though it said updating. when i came home i went to activate and got this message windows is not activated as your previous version of windows on this device was not activated prior to upgrade to windows 10 error code 0x803f7001.
i am nearly 100% positive that error wasn't there before the update. how the hell can i have a previous installation when this is an windows 10 oem computer?
View 9 Replies
Feb 20, 2016
I had a pc failure, so i upgraded my motherboard and chip, as expected windows still booted from start with no issues, restarted to install lan driver, and when it fired up again i had the activate windows bottom right of screen, how do i fix this, I upgraded from win7.
View 10 Replies
Sep 29, 2015
After upgrading to 10547, getting EC: 0xC004C003
Is there a specific product key I need for this build?
View 1 Replies
Jan 1, 2016
Microsoft said that with 1511 build we can now enter a Windows 7/8/8.1 licence key to activate windows 10 until july... but not so much more information whatsoever.
I have a Windows 7 starter spare product key. I guess it's 32-bit (since I never heard of 64-bit version).
I would like to know if with that key I could activate a clean copy of windows 10 home 64-bit ?
View 2 Replies
Apr 14, 2016
I today swapped from my AMD 8370 to an Intel Xeon 1231v3 and now when I'm trying to activate windows I get error with code: 0x8007232B. Do I need to reinstall windows or buy a new key what to activate with?
View 9 Replies
Oct 25, 2015
In Windows 10, is there a way to download or activate the standard (old) windows photo viewer? The Windows 10 Photos app sucks for more reasons than I can say in one message. But the biggest problem is that it refuses to let me view my photos if I am not connected to the internet. I am in Ethiopia for a few weeks and internet is spotty. I take hundreds of pictures, transfer them to my Surface 3, then try to view them and it gives me an error and won't let me view any of them. Once I have an internet connection I can view them even though they are stored locally.
View 4 Replies
Mar 21, 2016
So i did a BIOS Update on my Msi Mobo. I Have an Activate Windows Watermark on the bottom right corner. But it only just came up randomly after the pc being online and on desktop for 4-5 hours. But if i would to restart my pc my windows would be activated when i first start upp but if i stay online and keep pc online on desktop the activate windows will pop upp again. My key works if I am starting windows with it activated.
Updated 2-3 hour later. So i restart pc the minute i posted this and got into windows and the activate windows wasn't there. But after playing The Division for like 2-3 hours the windows activate came across my screen. And i look up error and theres nothing on google.
Error Code: 0xD000000272
View 1 Replies
Jul 8, 2015
I have a Lenovo X1 Carbon (2012 version) with a fingerprint reader. When I want to install the lenovo driver I have a message that said the Windows Biometric Framework need to be activate. I go into gpedit.msc and active the service, reboot the computer but still the error...
I check in the bios, no error..
View 9 Replies
Feb 21, 2016
So I have an old PC with a Windows 10 installation. I upgraded to Windows 10 from a Windows 8 Retail which I still have key and dvd-rom for.I am thinking that I format the old PC and use my old Windows 8 DVD to install on the new PC and then upgrade that one to Windows 10. Or could I even create a USB stick with the Windows 10 Media Creation Tool, install that one on my new PC and activate it using my Windows 8 Key?
View 1 Replies
Jul 31, 2015
I did the upgrade with the media creation tool - "Upgrade this PC" option and my Windows wasn't activated. Using the "Activate" button gets me a "Windows can't be activated. Try again later" message (I'm on Brazilian Portuguese language, so the actual English message may be a little different).
After some web searching, I tried a variety of slmgr commands that all return error messages saying I'm on a "non-core edition" and none of the slui options give any result (not even errors, they just don't do anything). Clicking on the error detail link on the activation page shows a blank popup.
Product key information shows *****- opposed to *****-XXXXX I've seem in many screenshots of other people having activation problems.
My previous OS was Windows 7 SP1 OEM that came shipped with the laptop and was never formatted (and the hardware was never changed). I kept my personal data while making the upgrade.
Another issue I'm having which I don't know if it is related or not to the activation problems, is that Window Update have tried and failed many many times to install package KB3074683.
For the record, the activation screen was different and I haven't received any message about the system not being activated before creating a Microsoft account in the XBox app (and I still log on the computer with my local account).
How to activate my Windows 10? I'd like to make a clean install but I'm afraid of doing so before my I get my license and not be able to roll back to Win7 if I can't activate it.
View 4 Replies
Jul 5, 2015
I have windows 8.1 pro currently and run a dual drive system on my computer consisting of an ssd for the OS and an hdd for everything else. I have transferred the default documents, photos, download folder etc to my hdd and am still looking to do the same with the appdata folder but dont want to risk everything up so its not happening. I also want to get windows 10 and have already reserved a copy. I want to know:
1. Will it mess up my file config as i must disconnect the hdd for OS install?
2. Is the upgrade worth the hassle?
3. Will it put computer performance in the sewer?
4. Will it screw up everything?
View 1 Replies
Aug 23, 2015
I originally got win10 through the free upgrade from 8.1 and did the install that only replaces system files etc. Some things weren't working correctly such as the sleep function and I kept being unable to login due to the start menu and Cortana not starting, so I decided to do a reset of the OS.
I managed to reset and get a fresh install of win10 but now I can't get activation to work. I've run all the windows updates and tried the slmgr.vbs /ato command but it says my product key is blocked.
View 9 Replies
Nov 23, 2015
I've recently been trying to upgrade from Windows 7 to Windows 10. I have tried to use the installer provided by Microsoft but the installer hangs on Checking For Updates. This doesn't end and I cannot pass it. I cannot use windows update to get the update as it just keeps searching for hours on end. I have tried to install the OS from USB and click 'Upgrade the System' but the OS will not activate; I guess it does not count as upgrading my OS so the key is not registered.
I have tried following this (Windows 10 - Upgrade Installation) and I have downloaded the ISO stated in Step 6 using option 1 (Windows 10 ISO Download) but then when I get to Step 7 #8, the ISO does not have Setup.exe?
View 9 Replies
Aug 9, 2015
I have been an Insider since the very first Insider build was released. I had installed each and every build first being on the Slow ring and the on the Fast. I had upgraded from a genuine Windows 8.1 Pro.
When the final RTM build TH1 Professional 10240 was released to Insiders ahead of schedule, I readily installed it and my machine was permanently activated at that time. The product key used was a generic one ending in 3V66T. Many of you may be knowing this.
Today, in fact just now, I formatted my system partition and installed a clean copy of Windows 10 Pro from USB which I had created using the Microsoft Creation Tool. When the setup asked me for a product key, I entered the same generic key as stated above. But now when I go to the Settings, it says the key doesn't work and hence, my machine cannot be activated. I signed-in using my Microsoft account before using the PC.
What the heck! I am an Insider. And didn't expect this to happen. What should I do next? Would the machine get activated itself after some time?
View 11 Replies
Mar 22, 2016
I created the installation file for windows 10 via the microsoft website...
I have an unused Win 8.1 Pro Product Key... Can I activate my Windows 10 with it?
View 1 Replies
Jan 17, 2016
I want to delete the windows old folder in windows 10 as its hogging up quite a bit of space, only upgraded windows 8 to 10 a few days ago.
However it wont let me, I have tried disk cleanup and tried to delete the windows old folder, but it tells me I don't have permission to delete this folder, and if I try again it says that I need permission from SYSTEM to make changes to this folder.
View 5 Replies
Sep 12, 2015
I restored my system back a few days because my OS just started falling to pieces with errors. That issue is fixed, but now my windows isn't activated anymore. I have had no hardware changes, since i upgrades from windows 7 except changing the driver for my Ethernet adapter. My error reads Error code: 0xC004C003
View 9 Replies
