Antivirus :: Have Bitlocker Prompt For Password On Non-System Drive
Nov 30, 2015
I am running Windows 10 Pro. I am using BitLocker on a non-system drive and not on my system drive. I am not planning on using it on my system drive. I do not have a TPM compatible computer.
Once I log into Windows, I would like to be prompted for the password to unlock my data drive. I did have this running correctly before I started having problems with my computer and had to do a clean install of Windows 10. I have searched for hours but can't find the article that walked me through how to do this.
I found a ton of articles that don't fit my situation because I don't want to auto-unlock, use a USB key or encrypt my system drive.
I want to use Bitlocker on my Non System E Drive without TPM. I read somewhere to do the following for without TPM:
" Under Local Computer Policy navigate to Computer Configuration Administrative Templates Windows Components Bit Locker Drive Encryption Operating System Drives and double click on Require additional authentication at startup." and so on.
but I am confused because the above note is mentioning "Operating System Drives " wherein I want to turn on Bitlocker on Non System Drive.
Can we turn bitlocker "on" on Non System Drives without turning it "on" on System Drives and Can we turn it "on" on a Single Folder instead of Drive.
If I enable Bitlocker with TPM (i.e. no passcode required on boot-up), and I have the Local Administrator account enabled on the machine (with my normal user account as a standard account), would it be possible for someone with a Hirens Boot CD blank/reset the Local Administrator account password and then gain access to the PC/Laptop using a tool such as this: Offline Windows Password & Registry Editor
Should I be enabling the PIN/Password protection on BitLocker, or does BitLocker prevent these sorts of tools from being used?
My query is regarding a brand new i7 sixth generation computer with Windows 10 Professional, including all the Windows upgrades, and a new Samsung SSD hard-drive.
The reason I bought Windows 10 Professional was for the full hard-drive encryption provided by Bitlocker in case my computer gets lost or stolen, as has happened to me previously. However, I have an ongoing problem with it and can't find a solution anywhere. I have tried to telephone Microsoft's telephone support several times but it has been beyond a joke with their outsource staff in far-flung countries with poor English claiming Windows 10 Professional does not have the option of Bitlocker or any form of encryption to all kinds of other absurdities.
Whenever I start my computer it does not ask me to enter a Bitlocker username or password (I am asked for the Windows password, but, as everyone knows, those are not totally secure and do no protect hard-drive data access). Also, in the Bitlocker section in Control Panel, I am not giving the option to edit a Bitlocker password, even though that option exists in all the other screenshots I have seen on the web.
How can I set my computer up to present me with a Bitlocker password on boot-up?
My system does say my hard-drive is encrypted, but how can I certain of that if there is not even password protection?
Here is what I see in my Windows Control Panel > Bitlocker section:
I note the warning message about rights being restricted to the system adminstrator, but I am the system adminstrator and have double-checked that.
I have been using BitLocker for a long time now and in conjunction with Windows 10 for 3 months and today something weird happened. When I tried to insert my password at boot, when I pressed the Shift key in combination with any other key, it inserted tens of characters at once. Valid with any character I press while Shift is also pressed. I tried a different keyboard, same result. I removed Bitlocker and reinstalled it, same result. Reboots, etc. I tried it all.
Now the only way to input the password is to press Insert so I can see the characters, press CapsLock for the capital letters and delete all the additional 30+ characters that appear when shift is pressed.
So at my work and home I have been setting up Bitlocker. Today at work I was setting up Bitlocker on a PC and we could not get a password for a option to unlock the device. The only option we get is to either use a USB or a pin. As per the compliance officer we have to require an encryption passphrase upon boot and I am not big on pins. How do I get my passphrase ability back?
I have a usb that has been encrypted using bitlocker, I can connect this usb to my desktop and I can input the password and access the usb. However on my laptop and other computers, when I plug in the usb I do not get the prompt to input my password and instead just says that the drive is inaccessible. Both my laptop and my desktop are windows 10 and I have admin rights on both machines. On both machines I have not used bitlocker, how I can access my usb on normal machines and how I can open my usb on my desktop but not my laptop?
I have tried everything I think, but obviously not.
Cannot open TPM, pop up tells me I do not Have at least 1.2. Cannot open Bit locker until I complete TPM wizard and assign myself as administrator??. then I can open Bit locker and proceed to encrypt my hard drive??
Is there a download for 1.2++ or is it a hardware addition..
I just installed Win10 Pro and I love it. When I enabled BitLocker, I selected to encrypt the Entire drive instead of the Used Space because I just feel I am safer with encrypting the entire drive. And my drive is not new. It had Win7 running before.
So I did a clean install of Win10 pro with BitLocker enabled to set to encrypt the ENTIRE drive. The encryption process took 7 hours to complete on a 300GB internal disk drive
When I had Win7 (and even Win8.1), it did not take that long to encrypt and I have the same exact internal drive. In Win7, the whole process took 1 hour. And with Win8.1 took a bit more time, but not 7 hours...
Why is entire disk encryption takes this long on Win10?
And also, I do not have a whole lot of programs installed. I have like 6 programs installed and there not that huge in size.
One of scores and scores of people having home network connection issues...when prompted for the password, etc, when trying to access a network share (another desktop in the house)... What is the attached jpg network password asking for ?
Right now only a 2 PC network (not Homegroup) Sharing is enabled and in Private mode all network settings have been checked and double checked
Is it the password for the current system...ie this PC's password when trying to connect to Network share ? Is it the particular user that's logged on password ? Is it the password for the network share I'm trying to reach ? Is it separate or different from the Windows On-line account password ?
Same for user...is it the current users name...is it the current PC's name....or is it the name the MS account is using
Each time I boot Win 10 it asks for my Live password. Presumably this is because I have OneNote 2016 installed. How can I eliminate this prompt without having to uninstall OneNote?
As you all know some people use dial up connection. I am one of them. I would like to click my dialup and automatically connect rather than viewing the " Username and password window " as I have saved UN and PW anyway, Basically, I would like to make it fully automatic, now this is the problem as can be seen in the ATTACHMENT.
It shows, lack of options in windows 10 when it comes to tweaking options for dialup. So, how to do it without GUI. As I downloaded and install the same file to install my dialer, I know there has to be a way to " Remove the tickmark from highlighted fields in the above pic.
looking for a password manager to protect a folder in my documents,Did some search and came across this one that I found on inserting password protect a folder into the search box top right.
If you select the video on this site there will be some girls dancing.I believe its just an advert I hope.
I'm not looking for this for anything down that line,Just want to keep some medical records safe.
Safeplicity - Password protect your important data - files and folders
Since today (I have installed Plex Media Server) I got my PC to peek at 100% cpu because of microsoft network realtime inspection service.
In Security Essentials (W7) there was the option in Defender to uncheck "Enable Network Inspection System".
I can not find this option in Win10. The only option I have is to disable the Realtime protection entirely. How to turn off network inspection system....
Uninstalled Office by mistake. I need the files. Tried Sys Restore but error says something like "a file could not be accessed and sys res did not work turn off anti-virus". Tried with anti-virus off (Avast). No go.
When I use ASC I keep getting warnings from defender that my system is not protected that I need to download an anti-virus program. Does Defender not know ASC has a virus program in its system?
I have two physical disks in my notebook, one simple partition each, BitLocker encrypted. Drive C:, which is my system drive and drive D:, for some media stuff.Windows Version is Windows 10.0.10586 x64.I have configured VSS to use the "Previous Versions" feature in case I accidentally delete or overwrite a file. I did this on my Win7 install to and it saved my butt at least three times.
VSS is running (Volume Shadow Copy Service set to "Manual"), snapshots are there but when I right-click on a modified file (or on the root of the disk) and click "Previous Versions", my D: drive correctly displays the existing snapshots, on my system drive C: there is always a "There are no previous versions available" message. But, when I click the "System Restore..." button, I get a list with my snapshots, so I guess I could restore my system.
configuration seems to be ok and the two manual snapshots are there on both drives. For the moment there is no system restore point, but it does not work with snaps created by them either.
C:WINDOWSsystem32>vssadmin List ShadowStorage vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool (C) Copyright 2001-2013 Microsoft Corp. Shadow Copy Storage association For volume: (D:)?Volume{46482e7e-0000-0000-0000-100000000000}
I have been using Windows 10 without any problem, until I did a system restore. When the computer rebooted, it would not recognize my password, even though it was correct. I have changed my Microsoft Account password, but that didn't work. I have the local account and the Microsoft account on the computer. Neither one accepts the password. I am using Windows 10 on two other computers without any problem. getting the computer to recognize the password? I can't get past the login window to access anything.
I have a PC running Windows 10 on which the Administrator Password either has been lost or changed. How do I go about either resetting the Administrator Password or formatting the drive and starting over?
I am downloading an ISO File from the official Microsoft Website (Windows 10 Insider Builds). My PC is infected which could result in the ISO File being infected and injected by a infection.. How to scan this ISO File before I install the Build onto my PC. After I do that, I will use a Bootable Anti-Virus, Bootable Anti-Virus to me.
I am using SUPERantiSpyware [SUPERantiSpyware.com] version 6.0.128 database version 12149 updated Nov 1, 2015. This is free version and I have been using it for more than two years on Windows 7 too.
Now I have Windows 10. When I run Scan ticking enable Rescue Scan [Maximum Boost], Windows 10 Hangs up giving following error message:
System sending this error message - 100 % completed KMODE_EXCEPTION_NOT_HANDLED
I have a client that has a Microsoft Surface Pro. It has a BSOD error code 0xc0000001. I have tried many ways to repair but I am unable to since Bitlocker has locked the hard drive. The client swears they never activated it and does not know the code to unlock. They did not have a microsoft account so I cant go that route. How to unlock hard drive without the bitlocker code?
