So at my work and home I have been setting up Bitlocker. Today at work I was setting up Bitlocker on a PC and we could not get a password for a option to unlock the device. The only option we get is to either use a USB or a pin. As per the compliance officer we have to require an encryption passphrase upon boot and I am not big on pins. How do I get my passphrase ability back?
View 6 RepliesI have read, on the Internet, that Bitlocker can be got into, without using the password, by 'experts using encryption breaking tools.
I use a 13 part password, incorporating upper case & lower case letters, numbers and special (punctuation?) symbols.
So, just how secure is Bitlocker?
I have a usb that has been encrypted using bitlocker, I can connect this usb to my desktop and I can input the password and access the usb. However on my laptop and other computers, when I plug in the usb I do not get the prompt to input my password and instead just says that the drive is inaccessible. Both my laptop and my desktop are windows 10 and I have admin rights on both machines. On both machines I have not used bitlocker, how I can access my usb on normal machines and how I can open my usb on my desktop but not my laptop?
View 2 RepliesI have tried everything I think, but obviously not.
Cannot open TPM, pop up tells me I do not Have at least 1.2. Cannot open Bit locker until I complete TPM wizard and assign myself as administrator??. then I can open Bit locker and proceed to encrypt my hard drive??
Is there a download for 1.2++ or is it a hardware addition..
I want to use Bitlocker on my Non System E Drive without TPM. I read somewhere to do the following for without TPM:
" Under Local Computer Policy navigate to Computer Configuration Administrative Templates Windows Components Bit Locker Drive Encryption Operating System Drives and double click on Require additional authentication at startup." and so on.
but I am confused because the above note is mentioning "Operating System Drives " wherein I want to turn on Bitlocker on Non System Drive.
Can we turn bitlocker "on" on Non System Drives without turning it "on" on System Drives and Can we turn it "on" on a Single Folder instead of Drive.
I just installed Win10 Pro and I love it. When I enabled BitLocker, I selected to encrypt the Entire drive instead of the Used Space because I just feel I am safer with encrypting the entire drive. And my drive is not new. It had Win7 running before.
So I did a clean install of Win10 pro with BitLocker enabled to set to encrypt the ENTIRE drive. The encryption process took 7 hours to complete on a 300GB internal disk drive
When I had Win7 (and even Win8.1), it did not take that long to encrypt and I have the same exact internal drive. In Win7, the whole process took 1 hour. And with Win8.1 took a bit more time, but not 7 hours...
Why is entire disk encryption takes this long on Win10?
And also, I do not have a whole lot of programs installed. I have like 6 programs installed and there not that huge in size.
If I enable Bitlocker with TPM (i.e. no passcode required on boot-up), and I have the Local Administrator account enabled on the machine (with my normal user account as a standard account), would it be possible for someone with a Hirens Boot CD blank/reset the Local Administrator account password and then gain access to the PC/Laptop using a tool such as this: Offline Windows Password & Registry Editor
Should I be enabling the PIN/Password protection on BitLocker, or does BitLocker prevent these sorts of tools from being used?
I am running Windows 10 Pro. I am using BitLocker on a non-system drive and not on my system drive. I am not planning on using it on my system drive. I do not have a TPM compatible computer.
Once I log into Windows, I would like to be prompted for the password to unlock my data drive. I did have this running correctly before I started having problems with my computer and had to do a clean install of Windows 10. I have searched for hours but can't find the article that walked me through how to do this.
I found a ton of articles that don't fit my situation because I don't want to auto-unlock, use a USB key or encrypt my system drive.
My query is regarding a brand new i7 sixth generation computer with Windows 10 Professional, including all the Windows upgrades, and a new Samsung SSD hard-drive.
The reason I bought Windows 10 Professional was for the full hard-drive encryption provided by Bitlocker in case my computer gets lost or stolen, as has happened to me previously. However, I have an ongoing problem with it and can't find a solution anywhere. I have tried to telephone Microsoft's telephone support several times but it has been beyond a joke with their outsource staff in far-flung countries with poor English claiming Windows 10 Professional does not have the option of Bitlocker or any form of encryption to all kinds of other absurdities.
Whenever I start my computer it does not ask me to enter a Bitlocker username or password (I am asked for the Windows password, but, as everyone knows, those are not totally secure and do no protect hard-drive data access). Also, in the Bitlocker section in Control Panel, I am not giving the option to edit a Bitlocker password, even though that option exists in all the other screenshots I have seen on the web.
How can I set my computer up to present me with a Bitlocker password on boot-up?
My system does say my hard-drive is encrypted, but how can I certain of that if there is not even password protection?
Here is what I see in my Windows Control Panel > Bitlocker section:
I note the warning message about rights being restricted to the system adminstrator, but I am the system adminstrator and have double-checked that.
I have been using BitLocker for a long time now and in conjunction with Windows 10 for 3 months and today something weird happened. When I tried to insert my password at boot, when I pressed the Shift key in combination with any other key, it inserted tens of characters at once. Valid with any character I press while Shift is also pressed. I tried a different keyboard, same result. I removed Bitlocker and reinstalled it, same result. Reboots, etc. I tried it all.
Now the only way to input the password is to press Insert so I can see the characters, press CapsLock for the capital letters and delete all the additional 30+ characters that appear when shift is pressed.
I am downloading an ISO File from the official Microsoft Website (Windows 10 Insider Builds). My PC is infected which could result in the ISO File being infected and injected by a infection.. How to scan this ISO File before I install the Build onto my PC. After I do that, I will use a Bootable Anti-Virus, Bootable Anti-Virus to me.
View 9 RepliesI am using SUPERantiSpyware [SUPERantiSpyware.com] version 6.0.128 database version 12149 updated Nov 1, 2015. This is free version and I have been using it for more than two years on Windows 7 too.
Now I have Windows 10. When I run Scan ticking enable Rescue Scan [Maximum Boost], Windows 10 Hangs up giving following error message:
System sending this error message - 100 % completed KMODE_EXCEPTION_NOT_HANDLED
I have a client that has a Microsoft Surface Pro. It has a BSOD error code 0xc0000001. I have tried many ways to repair but I am unable to since Bitlocker has locked the hard drive. The client swears they never activated it and does not know the code to unlock. They did not have a microsoft account so I cant go that route. How to unlock hard drive without the bitlocker code?
View 1 RepliesWhen I switched my laptop on a few hours ago it stated bit locker and key needed. I've tried to reset and remove all personal files (all my files are saved on cloud) but their 'was a problem resetting pc'. Then tried to get key (using internet on phone) but their was an error from Windows when I tried to input password for accessing cloud. However I can access my cloud through the app on my phone without any problems.
Called a pc repair service and they said the only option was to wait until I Windows could give me a recovery key.
I enabled the boot to startup settings option in winaero and now my computer boots to bitlocker. I checked online and I don't have the key for it. What can I do? (Computer is surface pro 3 i5 4g of ram)
View 1 RepliesCurrent Windows 10 (build 10240): I'm trying to turn on Bitlocker on my system drive, an SSD. During Bitlocker's preparation, shrinking the volume, I get error 0x80042574, and Bitlocker enabling will not proceed. The SSD reports 46.5 GB free out of 238 GB, and scanning it reports no errors.
(This is a UEFI system, and the system SSD has a 100 MB EFI system partition.)
I get this BSOD while unlocking storage drives. My OS is on a Vertex 4 SSD My storage drives are on HDD. I would say I have 50% chance of a BSOD unlocking drives.
View 3 RepliesThis morning I tried to login to my windows machine, windows 10 pro, intel i5 3.30ghz, 12gb RAM, 2TB HD. and kept telling me password was incorrect. I then removed windows password thru other admin user, and now all external hd's except for c: drive all lecked by bitlocker. Never installed or activated it.
I have 2 internal sata drives and 2 usb drives locked. I have gone to control panel, bitlocker, and tried to unlock drives, tried to do a search for key id on pc and nothing is found. My raw files are in the backup drives.
Yesterday I was decrypting my USb drive which have Bit-locker encryption and at 10% decryption I got some error(Error not at decryption process, error at windows) and decryption just stopped responding.
Now when I insert that drive and try to unlock with correct password, or with the correct recovery key, Its not unlocking. Says "This password is incorrect".What could I do now?
I am in the process of attempting to install Windows 10 on the system listed in my profile. I have downloaded Windows 10 as an ISO and transferred this to an NTFS formatted memory stick. The installation process works ok but I am having problems getting the SSD setup for UEFI mode and secure boot. what settings I need to apply under CSM to get the SSD running in UEFI mode? And if there are any other settings needed?
View 2 RepliesSo I thought I'd give Cortana a try since I can turn it off again if I don't want it, however I get to the point where it makes me login, I enter my email address and password and then it takes me to the next step where it tells me something like you need to enter your current password just one more time.
I enter the same password one last time and it tells me it's wrong.
I go through it all over again and reset my password and try again, go though the first login and get to the second stage where it asks me to enter my password one "last" time, and I do and it tells me it's wrong again.
Try a third time, this time leaving the password blank on the 2nd step and still fails.
Edit: I know the password is correct as I've used it to login to live this morning, so not sure why it's not accepting it in the 2nd stage of the Cortana setup.
I use a VPN and Cortana and the OS thinks I'm somewhere else. Is there anyplace to put a zip code to force the OS to think you're in a specific location?
View 2 RepliesI've been using Windows 10 set up exactly as I wanted it since my original installation. Today I wanted to set up Cortana. It was suggested that I use a PIN instead of a password. I thought this was just for Cortana so I agreed. Now my whole system has been changed. I have to log in with my Microsoft account which I never had to do and don't want to do. How can I get back to my original name with no long-in at startup.
View 9 RepliesWhat is the deal with windows and contrast? For many years windows has been lowering the contrast to the point that now with windows ten it is often impossible to see. The box I'm typing this in is basically invisible. The scroll bars are gone and I have to find them by waving my mouse around until I cross it. The selected link in my side bar is reduced to a then slightly grey line that simply cannot be located. This is just silly.
Is there any setting that can get some contrast back? And I don't mean the text contrast. I can read text fine. It is the controls, gadgets and highlighting that needs to be fixed.
I got a new laptop (Pavilion 17) and first time using windows 10.
Problem 1 - I originally had to turn on scrolling for the click pad which was yesterday. Now today scrolling was turned off and I had to turn it back on again. Stopped using computer last night while it was copying files over (via network). Computer was left open and running.
Problem 2 - This morning the network was completely disconnected and I had to go in and 'join the network' again. I did have to 2 this 3 times yesterday while I was using the computer as well.
Problem 3 - This morning all my windows had been closed? Explorer windows that were being used to copy and firefox also.
I don't particularly want to have both a PIN and a password - it seems 100% pointless.
Is there any way to enable Windows Hello's biometric login options without setting a PIN?