Antivirus :: UAC Is Consistently Turning Itself Off
Oct 13, 2015
After researching the forums this morning I have decided to post my issue;
I am consistently resetting the UAC (image below) and rebooting to allow Edge and Calculator to function as normal.
What must be done to keep this setting in its place permanently? Never had this issue with Windows 7 and never had to put the setting in this position either, it just worked. I'm sure I need some education on this for Windows 10.
I have tried to modify (through the registry)
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystemEnableLUA
Both ways (bit off/on) and nothing works. Maybe I'm not in the right area for this?
View 9 Replies
Similar Messages:
Nov 29, 2015
So, earlier today (after having been gone for the last week on a trip) I installed a update for my Windows 10 computer. After the update (and it seemed like a doosy) the system worked fine for about 5-10 minutes and so I set about doing the usual disk cleanup. During this though Windows Defender turned itself off. Attempts to open the program either result in a window that just reads that the app is 'turned off' and isn't monitoring the computer.
Following the tabs on the 'action center' pull out seem to open up the Defender tab properly and allows me to turn it on...but then it turns itself off again after a couple of seconds.
I'm not currently running any other kind of virus scan/spyware protection software on the machine atm. Aside from just installing new anti-virus software.
View 9 Replies
Jan 15, 2016
I'm presently using (running) Avast Pro and Malwarebytes Anti-Exploit-Free, with weekly running of CCleaner, Malwarebytes Anti-Malware, and AdwCleaner. I do a lot of browsing and haven't had any problems with this approach. However, I got the hankering to also keep Windows Defender up-to-date and to occasionally run its scan just to see see if anything comes up.
So, I go to WD with the expectation that it is turned off and find that it may not be. I would go to update&security>windows defender and find, to my surprise, that real-time protection and cloud based protection are turned on, but grayed out. Furthermore, when scrolling to the bottom of the screen and clicking Open Windows Defender, I get the message that "WD is turned off and not monitoring the computer." I then went to Brink's WD tutorial (Windows Defender - Turn On or Off in Windows 10 - Windows 10 Forums)
View 3 Replies
Aug 11, 2015
I have a Toshiba laptop running on a 64-bit operating system with 101 GB free space.I have tried numerous times to update my windows 7 to windows 10 with the same result of a 32% freeze up.I have tried completing all updates for my current windows 7 and turning off my antivirus program before attempting the upgrade but have had the same result no matter what I do.
View 1 Replies
Dec 15, 2015
I am running Windows 10 Professional 64 bit. Whenever I set the option "Turn off the display" to "Never", it reverts back to the default "15 minutes". This is under the "High Performance" profile. I have never, since Windows 3.11, ever had a setting change itself back. I have tried to change it and restart. It will either revert upon restart or shortly after. It will revert back even if I do not restart.
View 2 Replies
Nov 14, 2015
What is the minimum I need to have set to "on" to get mail notifications to work consistently with action center? Is it possible? Yesterday I got it working pretty consistently and I thought great but today it seems to work only occasionally. I've read this is common.
I have a live and outlook email account. I have them set up on the mail app and both are set to allow a banner notification in the settings on the mail app. I also have in Settings/System/Notifications and Actions/Show notifications from these apps/Mail set to ON banners and sound.
I also have the Mail app as the default.
What else beside this in Settings/System and Settings/Privacy do i need enabled to get Mail notifications to work reliably?
I have Thunderbird which gives me notifications but I don't like to leave it on and would like it if the notifications could work.
View 9 Replies
Dec 24, 2015
So I'm working on a brand new Dell laptop, and I've been working with Adobe Illustrator & Bridge CS6 and Photoshop CC almost every day for the last week and a bit (got it December 12th, 2015). Everything's been fine up until yesterday, when the BSOD hit me suddenly while trying to save a file in Photoshop. Since that initial crash I can't even have Photoshop open for more than a few moments without the same thing happening. Each time it's a Kernel Security Check Failure.
I ran Windows Memory Diagnostic, I ran chkdsk, updated my drivers, did a full system virus scan in McAfee, and even tried uninstalling all Adobe programs, running Adobe Creative Cloud Cleaner Tool, and reinstalling from scratch. The moment I get Photoshop up and running again the same thing happens.
Take a look at my minidump files and let me know what might be causing the problem. Photoshop is essential for some important work I'm trying to get through by the end of the year
Minidump files here: SALVATRON-TX-55-2015-12-24__11808_88.zip
View 9 Replies
Dec 15, 2015
I am downloading an ISO File from the official Microsoft Website (Windows 10 Insider Builds). My PC is infected which could result in the ISO File being infected and injected by a infection.. How to scan this ISO File before I install the Build onto my PC. After I do that, I will use a Bootable Anti-Virus, Bootable Anti-Virus to me.
View 9 Replies
Oct 31, 2015
I am using SUPERantiSpyware [SUPERantiSpyware.com] version 6.0.128 database version 12149 updated Nov 1, 2015. This is free version and I have been using it for more than two years on Windows 7 too.
Now I have Windows 10. When I run Scan ticking enable Rescue Scan [Maximum Boost], Windows 10 Hangs up giving following error message:
System sending this error message - 100 % completed KMODE_EXCEPTION_NOT_HANDLED
View 2 Replies
Sep 13, 2015
My pc has recently decided to start turning itself on in the middle of the night, while its supposed to be hibernating (I'm not sure yet if it is also affected during a normal shut-down). I also haven't managed to lock down the exact time (if there is one) that this happens.
From some digging I did, some people seemed to think that the task scheduler was doing things by itself. I identified two task that looked like they might fit the criteria (below) - are either of these likely to be causing the spontaneous turn-ons, and what's the safest way to resolve this?
[URL]
View 9 Replies
Aug 6, 2015
I upgraded one of my systems to 10 the other day and ever since it won't stay off, it just turns itself back on every time I shut it down. It was a clean install, not an upgrade. Never had this issue before the upgrade.
View 9 Replies
Oct 16, 2015
I noticed we had updates automatically installed today. The next thing I noticed was that when working in Excel if I didn't move the mouse within one minute the display turned off. After trying a few other programs I realize that it turns off after a minute in almost all my programs or even when I'm just reading a newspaper. If this is something from the latest updates? I never experienced this before. In fact, it just turned off while I was mulling over this post.
View 19 Replies
Feb 19, 2016
I don't need that windows firewall as I have bitdefender total security when first installed bitdefender it shut down windows firewall and it keep off even after restart but SOME games after I run them and then restart windows firewall will turn itself on again how o stop it ?I shut it down from control panel but after running SOME GAMES it will turn itself on again it happened with only some kind of games .
View 1 Replies
Aug 4, 2015
After shutting down my computer every night, at some point during the night the computer is randomly turning itself on. I have not changed anything that would indicate that this should occur. It didn't happen when I had Windows 8.1 and now that I have Windows 10 it does happen.How to fix it?
View 1 Replies
Aug 27, 2015
I have a computer with the following configuration: i5 4460, ASRock B85M-DGS, 8Gb ram HyperX, Sapphire Radeon R7 265 Dual-X (with latest video drivers 15.7.1), SSD Kingston v300 120GB, windows 10 with latest updates and my display is LED Samsung LT22D390 22 inch. Every day, about 5 minutes after I turn on the computer, my display is turning off and turning on after I click the mouse. I put in power options "turn off display" to never but nothing changed. On windows 8.1 I don't have this issue.
View 9 Replies
Oct 2, 2015
Since I installed Windows 10, it automatically went to high contrast.
Every time I reboot - it reverts to high contrast again.
When I go to settings to change, none of the buttons there work for me.
View 3 Replies
Jan 4, 2016
I always used to have my UAC turned off, and was very happy being able to quickly open up different programs with administrator privileges using the WinKey+R.However, ever since upgrading to windows 10, turning UAC triggers the "This app Can't Open" error [URL] ....
Searching for a solution quite a while, all I came across is suggestions to turn UAC back on. This is not an acceptable solution, I wish to keep the damn thing off, and don't see any reason why it should interfere with my ability to open the edge browser.
View 5 Replies
Jul 29, 2015
I am working on a .reg file to disable all the unwanted services. I do not know the keys to use for the following services and would like adding them to my .reg located below.
Security AccountsSystem Event NotificationWindows FirewallWindows Eventlog
And can you look over my current list and see if there is anything that 100% must not be turned off? Is there anything else you would add?
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesSchedule]
"Start"=dword:00000004
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesALG]
; Application Layer Gateway Service
"Start"=dword:00000004
[Code]
View 7 Replies
Aug 21, 2015
This is a problem I hadn't experienced until Windows 10. Whenever I play games on my PC, the audio seems to cut out roughly 10-15 minutes after startup. Sometimes earlier, sometimes later. It will just stop without any warning. When I exit the game and try to test the sound, for example: playing a youtube video, it works just fine.
But I'll start up the game again and voila! It works and then cuts out some time later. I've updated all of my sound card drivers and whatnot, video drivers up to date, etc...considering reverting back to windows 8 where I didn't have these problems.
Problem just happened while watching a music video on youtube, so it's not gaming specific. Still just as annoying though - if not more
View 1 Replies
Aug 13, 2015
Why does my PC keep turning on after going to sleep? it will sleep for like 30 Seconds and then turn back on... ive tried turning off the wake feature and stuff.
View 1 Replies
Nov 21, 2015
I have what sounds like a simple problem/question. It seems that rkill has disabled Windows defender. When I try to turn it back on through the settings screen, it says defender is disabled with no option to do anything about it. How can I turn it back on after rkill ?
View 8 Replies
Aug 10, 2015
I am having a really annoying problem when playing games. After about 10 minutes my screen will turn black and the light on my monitor goes orange as if it's not connected. When I installed Windows 10 I had the exact problem, but this was because it was defaulting to my on board graphics not my Graphics card and I fixed this.
------------------
System Information
------------------
Time of this report: 8/10/2015, 14:06:55
Machine name: LONO-PC
Operating System: Windows 10 Pro 64-bit (10.0, Build 10240) (10240.th1.150729-1800)
Language: English (Regional Setting: English)
System Manufacturer: To Be Filled By O.E.M.
[code]....
View 1 Replies
Aug 20, 2015
I am having an issue on my Inspiron 15 where my cooling fan doesnt always start up. For example, ill start up the laptop, and start web browsing or playing a game, and the fan will never turn on. I have had it overheat and shut off a few times. But if i restart the laptop manually (start>power>restart), it will spin up automatically as it should. But then after a few more restarts, i will have a session where the fan will never turn on. Right now my only solution, besides a restart, is to use the program Speedfan, and ramp the fans to 100%. My other Inspiron 15, running a Broadwell i7 and Windows 10, has no issues at all.
View 4 Replies
Aug 2, 2015
I use a Lenovo Miix tablet as a "kiosk". The tablet hangs on a wall, and never goes to sleep - but it turns off the screen after 1 minute inactivity. Touching the screen should light it up immediately.
All this worked wonderfully with Windows 8.1. After the move to Win10, touching the black screen does not light it up. It seems that Win10 puts the tablet to sleep, although the power options are clearly set to "Sleep: NEVER".
View 4 Replies
Jul 30, 2015
I upgraded from Win 7 Pro to Win 10 Pro yesterday and so far everything works great, the only problem is that my secondary HDD always stays on. I have a 128GB SSD as my main drive and an 750GB HDD as my secondary drive for games, pictures and stuff. Since the latter runs at 7200rpm and is quite loud and my laptop is otherwise pretty much completely silent (when I turn the fan on stealth mode) I had created a power profile for studying that turns off hard drives after 1 minute of not using them and with windows 7 that worked just fine.
Now though, my secondary HDD never turns off. I checked task manager and resource monitor and found that my pagefile was on my secondary so I moved that to my SSD, but now it still doesn't turn off, even when Task manager and resource manager tell me nothing has accessed it for several minutes.
View 7 Replies
Jul 29, 2015
I was running Win 7 before the upgrade and I had the window focus setting to follow my mouse. In other words, I just needed to place my mouse in a window for it to be focused... no clicking necessary. There was a small delay in the focus and this worked well for me. I find in 10, however, that the delay is gone so as I move my mouse around the screen, windows popup very quickly. The easiest solution for me is to just turn off the feature. But I can't seem to find where to do that. In 7, this was done via Ease of Access menu but that option is not there in 10 nor is it in the mouse options and I don't see a Windows Settings option/menu anywhere. The only way I can manage my windows right now is to minimise everything other than the window I'm working in... this is a bit inconvenient.
View 3 Replies
