Antivirus :: Windows Defender Needs To Scan Your Computer - Non Stop Notification
Feb 10, 2016
How to stop this damn notification from popping up every five minutes? I've tried everything. I've let it scan my computer (both quick-scan and full-scan), but within five minutes the notification pops back up again. I've looked online and found that it can be down to a certain setting in CCleaner, I use CCleaner but the option that all the solutions say to untick isn't present in the latest versions.
I'm running Windows 10 64bit.
View 8 Replies
Similar Messages:
Aug 3, 2015
I believe it's called adding it to the context menu.. I saw a registry hack for Windows 8 but i'm not sure how to do it in Windows 10.. I got used to using MSE in Windows 7 so now i'm lost not being able to right click a file to scan it immediately.. how to enable this in W10 Defender?
or should I just dump Defender totally for another Free antivirus? I was using Avast for awhile but MSE was less heavy on the resources so I went with that..
View 9 Replies
Dec 19, 2015
I run a scan but as soon as I have rebooted and within an hour or so it asks me again? I receive the notification in the taskbar and Windows Defender turns orange and states I am unprotected. So far I have completed 3 clean scans today but after a reboot it is as if it does not remember that I have run a scan. I am running the latest Windows 10 pro.
View 4 Replies
Jan 15, 2016
I'm presently using (running) Avast Pro and Malwarebytes Anti-Exploit-Free, with weekly running of CCleaner, Malwarebytes Anti-Malware, and AdwCleaner. I do a lot of browsing and haven't had any problems with this approach. However, I got the hankering to also keep Windows Defender up-to-date and to occasionally run its scan just to see see if anything comes up.
So, I go to WD with the expectation that it is turned off and find that it may not be. I would go to update&security>windows defender and find, to my surprise, that real-time protection and cloud based protection are turned on, but grayed out. Furthermore, when scrolling to the bottom of the screen and clicking Open Windows Defender, I get the message that "WD is turned off and not monitoring the computer." I then went to Brink's WD tutorial (Windows Defender - Turn On or Off in Windows 10 - Windows 10 Forums)
View 3 Replies
Jan 5, 2016
I found out how to see the event logs for Windows Defender scans from a thread on eightforums ("Windows Defender - where are the Scan Results?"). I just ran a full scan, but Windows Defender apparently ran a quick scan afterwards, so there is no confirmation on the WD user interface that the full scan completed. So following the advice in that other thread, I looked at the WD log in the Event Viewer. I see in the Operational listing two events with Event ID 1000, which seems to correspond to a scan starting, and two with Event ID 1001, which corresponds to a scan finishing (see below). The two 1000 events and the two 1001 events differ from each other in the "Scan Type Index" visible in the Details view of each event, which is "1" for one pair of 1000 and 1001 and "2" for the other. The times are consistent with the 1000/1001 pair for Scan Type Index 2 being the full scan and the pair with Scan Type Index 1 being the subsequent quick scan. Am I correct that Scan Type Index 1 is a quick scan and Scan Type Index 2 is a full scan? Is there some place where the various event type codes, etc are described?
View 1 Replies
Feb 10, 2016
plugged in USB thumb drive opened windows explorer right clicked drive scan with windows defender and it said scanning pc but it never shows any options so I dont know if it scanned pc or usb for sure why or not
View 2 Replies
Aug 11, 2015
I am unable to scan pendrive using defender in windows 10
View 3 Replies
Jan 10, 2016
First thing I should mention is I haven't had a virus in at least ten years. Those of you that run Windows Defender know that it runs a daily quick scan so maybe no real need to run a full scan. That said, I set WD to run a full scan and went to bed last night. Woke up this morning and saw it had barely moved. First thing I thought of is the 'power options' settings. So I did the usual: Control Panel/power options – power saver – change power settings/put computer to sleep-never / change advanced power settings/change settings that are currently unavailable-Hard disk-Turn off hard disk after – Never – Apply – O.K.
Started another scan, within ten minutes I saw that the power button light is in 'sleep' mode. Let it run for two hours anyway. Scan basically did not run.
Windows 10, Dell computer, all updates. I have run full scans in the past, been several months, and it took a little less than two hours. Do I suspect I have a virus – no. Still that shouldn't prevent me from running a full scan. I have "no" other issues.
View 12 Replies
Dec 5, 2015
How can I reinstate Windows Defender,which is now closed down,by removing McAvee security even though the icon is missing.
View 9 Replies
Oct 24, 2015
Defender on my main machine wont update saying a network problem yet my other machine on the same network is up to date, see pic.
View 1 Replies
Jan 13, 2016
As I use a proprietary antirvirus, and on a whim, I just thought to check my Windows Defender setting, only to find to find that it was turned on*. (I could swear I turned it off, sometime in the past. I was further surprised to find that the On/Off button is disabled--so I CAN'T turn it off!
I'm further surprised to find the notice, under Settings/Windows Defender, which says "You can turn this off temporarily, but if we find that it is turned off for a while we'll turn it back on again, automatically." (One mystery solved*)
As I understand it, Windows Defender is merely Microsoft's own notion of free antivirus software--so when Windows turns Defender on again, this means I not only have two antivirus packages running (and possibly interfering with each other--involuntarily) but also that I now seem to have no choice in the matter--unless, of course, I permanently uninstall the antivirus software that I paid good money for.
Questions: How do I re-enable the Windows Defender On/Off button; and How do I DISable Windows ability to turn it on again?
View 4 Replies
Aug 13, 2015
There does not seem to be a way to schedule an automatic daily scan with Windows Defender. I got a action center notification to run a Defender scan. Is that something I can expect regularly? Having to do a regular manual scan will be difficult.
View 9 Replies
Jan 14, 2016
but I did a manual update just now and did not get any error message and windows update says it is up to date nevertheless, WD reports it is out of date. but it shows green bar at top.
and after a restart, when I go to WD settings it says that cloud and sample submission is off. This is despite the fact that I turned it on.
View 5 Replies
May 4, 2015
I'm on build 10074 of Windows 10 and cannot find a way to permanently disable Windows Defender. When I go to Control Panel > Windows Defender > Settings, it brings up the new Windows 10 System Settings app which gives an option to turn "Real-time protection" off. However, the description on that states:
Real-tim protection find and stop malware form installing or running on your PC. You can turn it off temporarily, but if it's off for a while, we'll turn it back on automatically.
After about 15 minutes, it turns itself back on. How can I disable this permanently?
View 9 Replies
Nov 29, 2015
So, earlier today (after having been gone for the last week on a trip) I installed a update for my Windows 10 computer. After the update (and it seemed like a doosy) the system worked fine for about 5-10 minutes and so I set about doing the usual disk cleanup. During this though Windows Defender turned itself off. Attempts to open the program either result in a window that just reads that the app is 'turned off' and isn't monitoring the computer.
Following the tabs on the 'action center' pull out seem to open up the Defender tab properly and allows me to turn it on...but then it turns itself off again after a couple of seconds.
I'm not currently running any other kind of virus scan/spyware protection software on the machine atm. Aside from just installing new anti-virus software.
View 9 Replies
Sep 11, 2015
I am currently using Windows 10 Pro 64 Bit. Is Windows Defender enough for my PC protection, or would I have to install any other one? I regularly take all the upgrades Microsoft provide me for the PC.
View 1 Replies
Jan 3, 2016
Is it possible to remove Windows Firewall+Defender from Windows 10 ISO image? Installing Windows 10 without FW+DEF?
View 4 Replies
Feb 10, 2016
The windows defender in my pc is disabled and isn't starting up. It just shows that the app is turned off and isnt monitoring your system. The windows security center is also disabled. I tried manually enabling it from the services app and it got enabled but it gets disabled after sometimes itself.
I have tried booting into safe mode to enable the defender but no luck. i alos dont have any other AV instaleed on my pc that might be clashing with my defender. I also did an integrity check using /sfc code in command prompt and it returned no errors.
View 9 Replies
Dec 19, 2015
I am having trouble with Windows Defender and Update. I am getting error 0x800705b4 for Defender and though I've searched online on how to fix the problem none of them seem to work. Also, my computer won't let me access the update & security portion of my settings. When I click on it the window closes immediately.
View 3 Replies
Oct 7, 2015
I have Win 10 Pro x64. I recently upgraded from Bitdefender Internet Security 2015 to Bitdefender Total Security 2016. With both versions, I notice that whether booting cold or a restart, sometimes Windows Defender is active (can be accessed thru the Control Panel icon and updates itself etc) and other times it is inactive "The application is turned off and is not monitoring your computer". Same thing with the Windows Firewall.
Is this a known 'bug', maybe with Windows Defender or Bitdefender, that allows Windows Defender to enable itself, seemingly randomly when starting/restarting the PC. My understanding is that the 3rd party AV should permanently override and disable Win Defender.
I presume that this is not a good thing and conflicts between the two will result in problems/instability.
View 4 Replies
Dec 1, 2015
Microsoft now allows Windows Defender to detect PUAs
Microsoft has recently added a new adware protection system for enterprises, allowing them to detect and block Potentially Unwanted Applications (also known as PUAs) on their computers.
But according to Microsoft own announcement, this feature was only available for enterprises, so consumers running Windows 10 Home or Pro, for example, aren't getting it.
And yet, there's a very simple way to enable this feature on any computer with Windows Defender, and as gHacks notes, it all comes down to just a few registry tweaks.
Before anything, make sure you create a backup or a system restore point, just in case something goes wrong and you need to recover your Windows install.
Read more: [URL]....
SOURCE: Shields up on potentially unwanted applications in your enterprise - Microsoft Malware Protection Center - Site Home - TechNet Blogs
View 6 Replies
Nov 15, 2015
Today I was warned by windows 10 that my antivirus was off. I checked windows defender (the only AV I have) and it was indeed off. However when I try to start it I get an error:
So then I went to services and tried to manually start the service, only to get this:
Why does the service keep getting turned off?
View 9 Replies
Oct 24, 2015
I've attempted to turn off my windows defender via group policy editing, however; following the guide here on the forums (how to turn off defender) there is simply no folder/tree with windows defender in the group policy editor.
I have w10 pro and am able to successfully start gpedit.msc.
Why its missing? I really dislike the regedit way of disabling/enabling; and thus wish to use gpedit...
View 4 Replies
Feb 1, 2016
When I use ASC I keep getting warnings from defender that my system is not protected that I need to download an anti-virus program. Does Defender not know ASC has a virus program in its system?
View 2 Replies
Jan 23, 2016
How can you change the time when Widows Defender auto scans your PC? When I had 8.1 it ran about 2AM. That was OK. Now in 10 it runs about 4 or 5PM. That is when I use my PC most. I looked in Task Scheduler, but I can't find it.
View 6 Replies
Feb 10, 2016
I've seen 2 ways to add the full scan argument to MpCmdRun.exe.
The first is "-Scan -ScanType 2" (without the quotes).
The second is "-Scan -ScheduleJob -ScanType 2" (without the quotes).
I can't seem to find anything on the -ScheduleJob parameter.
ScheduleJob parameter? Also, which of the two arguments is correct?
View 3 Replies
