Somedays ago , i disabled the notification banner for my antivirus at every virus signature updates , i got a notification banner
well in the preferences-> notification ->i disabled it for my antivirus
today i wanted to re-enable but there is no more in the list of the application
I disabled Defender, and installed Trend Micro. I now want to let the Trend expire and reinstall Defender, but can't figure out how to do it. I've tried Control Pane, but get message that says "Defender Disabled" but no "Enable" button.
View 2 RepliesMicrosoft now allows Windows Defender to detect PUAs
Microsoft has recently added a new adware protection system for enterprises, allowing them to detect and block Potentially Unwanted Applications (also known as PUAs) on their computers.
But according to Microsoft own announcement, this feature was only available for enterprises, so consumers running Windows 10 Home or Pro, for example, aren't getting it.
And yet, there's a very simple way to enable this feature on any computer with Windows Defender, and as gHacks notes, it all comes down to just a few registry tweaks.
Before anything, make sure you create a backup or a system restore point, just in case something goes wrong and you need to recover your Windows install.
Read more: [URL]....
SOURCE: Shields up on potentially unwanted applications in your enterprise - Microsoft Malware Protection Center - Site Home - TechNet Blogs
How to stop this damn notification from popping up every five minutes? I've tried everything. I've let it scan my computer (both quick-scan and full-scan), but within five minutes the notification pops back up again. I've looked online and found that it can be down to a certain setting in CCleaner, I use CCleaner but the option that all the solutions say to untick isn't present in the latest versions.
I'm running Windows 10 64bit.
So My computer is basically behaving as if quiet hours mode is activated, but quiet hours are NOT activated.
For example, if I get an email or plug in a new device, the only thing that happens is the icon for action center goes from clear to white.
This is only happening on my main user account, it is not happening on my admin account. I suspect that if I made a new account, the problem would not be present there either.
So because this problem only exists in one user account and not the other, it must be some system setting that was flipped for one account and not the other. But I have searched high and low for any notification settings and they all seem correct.
I am downloading an ISO File from the official Microsoft Website (Windows 10 Insider Builds). My PC is infected which could result in the ISO File being infected and injected by a infection.. How to scan this ISO File before I install the Build onto my PC. After I do that, I will use a Bootable Anti-Virus, Bootable Anti-Virus to me.
View 9 RepliesI am using SUPERantiSpyware [SUPERantiSpyware.com] version 6.0.128 database version 12149 updated Nov 1, 2015. This is free version and I have been using it for more than two years on Windows 7 too.
Now I have Windows 10. When I run Scan ticking enable Rescue Scan [Maximum Boost], Windows 10 Hangs up giving following error message:
System sending this error message - 100 % completed KMODE_EXCEPTION_NOT_HANDLED
My install to Windows 10 failed on a PC running 32bit Windows 7 Home Premium.
The error I got was that the NX feature was not enabled on the CPU.
I have a Laptop (Windows Home 10) and a Desktop (Windows 8.1 home) and I want to enable Administrator on both. I have used all of the suggesting about this I got on the internet and nothing works.
View 7 RepliesI could not find a solution for how re-enable the windows key on my keyboard. This is the second time it just stopped working. I cannot figure out how I did it before.
View 4 RepliesHow to enable fast startup without enabling hibernation windows 10?
View 2 RepliesI want to enable expandable folders like in previous versions of windows. But can't find out how to do it. Here is a tutorial for Windows 7 to explain what I am trying to do.
How to Auto Expand Sub-Folders in Explorer just like XP in Windows 7 [Tips] | Next of Windows
Is it possible to enable Hybrid Sleep in Windows 10? This is what WIkipedia says in the article about Sleep mode:
Sleep mode and hibernation can be combined: the contents of RAM are first copied to non-volatile storage like for regular hibernation, but then, instead of powering down, the computer enters sleep mode. This approach combines the benefits of sleep mode and hibernation: The machine can resume instantaneously, but it can also be powered down completely (e.g. due to loss of power) without loss of data, because it is already effectively in a state of hibernation. This mode is called "hybrid sleep" in Microsoft Windows other than Windows XP.
It's not the same as Fast Startup, because this is basically a stripped-down variant of hibernation as described in the original post. I can't find the option to enable Hybrid Sleep anywhere.
I am running insider preview windows 10 10130 and I am unable to enable subtitle in Movies & Tv app. I mean srt. subtitle
I download new version of build 10158 and still subtitles doesn't work.
I recently built this computer and had win 7 installed. I upgraded to win 10 and I also have a touch screen monitor, how do I enable touch screen on my computer?
View 1 RepliesI don't really know how to say this but my wifi wont turn on, when I diagnose the driver it says I need to turn the wifi button thing on but this laptop doesn't have one so how do I enable wifi without the button
View 9 RepliesI upgraded my friends HP laptop to Windows 10. The issue now is I can't enable Wifi. The card is recognized correctly in Device manager and no issues is found with it. It looks like it is fine. However in the Network Settings WLAN is set to "Off" and when I try to turn it on it always jumps right back to off. eg. I can't enable it.
HP clearly state any laptop bought prior to specific date in 2013 will not get any driver updates from their side for windows 10. And updating through device manager only tells me it's the newest driver available.
The Wifi card i Broadcom 4313GN card. I searched for win 10 drivers but did not find anything.They only offer linux drivers on their homepage...
So any solution to the issue or link to a win 1' driver for this wifi card?
I have disable system protection on my primary (C:) which is an SSD.
When trying to enable system protection on my 1TB HDD (E:), the option is simply greyed out.
I had hoped to save writes on my SSD to increase it's lifespan, and it appears to be recommended in various SSD optimisation guides. Is it at all possible to enable system restore points to be saved on other hard drives?
In windows 7, I could drag maximized windows between monitors without having to resize them. How do I enable this with Windows 10? I do not use Windows snap, nor do I want to what-so-ever. Disabling it was the very first thing I had to do before I lost my mind. How frustrating it was.
Also, is there a way to change the color of the drag area on windows/folders? For example the area where I'd click to drag a firefox window is the same color as everything else. In windows 7, it was blue, while the file/edit and tab areas were grey. And finally, is there a way to enable the re-arranging of items on my taskbar, if they are the same program?For example if I have 3 firefox windows open (not in tabs), and I want to put them in a certain order on my task bar, is this possible?
Noticed my System Protection was not enabled.
Can't click on the "Turn on......" Does nothing when I try to "Turn on...."
Attached a pic.
I was trying to mess around with a few things in the sound settings so that I could get audio to play through my headphones. While doing this, I disabled my speakers that were plugged in. Now, I want my speakers to return being the main sound playback device.
View 2 RepliesEverybody wants disable - but what to do when I want to ENABLE ?
From the very first time after fresh update from Windows 8 to 10 - there was a problem to have Lock Screen.
I like the simple information on it and quick display off after a while not used...
Then, after any option possible used to enable it, it somehow appeared after windows update. I was lucky to have it back. Self customized to black background without any disturbing images and icons - only pure time and date.
And, then, after last whole build update from 10240 to 10586 - again NO MORE LOCK SCREEN .....
Tested again any possible option (system option, gpedit option, registry change) - nothing works like after first upgrade from 8 to 10...
If I try to set the notebook (Lenovo Yoga 15) to Lock, it appears blank black (my custom solid color) background for around 2 seconds, and then it goes directly to login dialog (personal image with login button).
While looking things over on Speccy, I noticed that hyperthreading is not enabled on my system. Should I enable it, and what would be the benefits. Also, if I do enable, how would I go about it. I will try to post a screen shot from Speccy to show what I have.
View 6 RepliesIs there an easy way to disable and re-enable groups of services / processes in Windows 10 so that the computer can be switched between optimization 'profiles' for, say, routine office work, audio/video editing, and gaming?
I have two computers now - one for routine office work (e.g., Office suite, Quickbooks) and a dedicated audio/video editing workstation. The latter is very powerful and I'd like to use it for both jobs, but not if all those background processes (59 total), like Cortana, OneDrive, iCloud mean sacrificing resources for critical A/V work. Neither do I have the time or patience to manually disable scores of Startup apps and services each time I throw my A/V hat on.
I've noticed that I need to switch the entire computer to a Microsoft account, just to use Cortana!
Is there a way to use Cortana normally, but while keeping the local account?
On Windows 8, I used to be able to sign in individually for each app, can I do the same thing for Cortana?
On my Dell Alienware m14x it seems that I can not find a way to disable the feature that enables a delay between the time you can click or move on the touchpad to when you can press a key. Meaning, if I quickly stop typing and attempt to move my touchpad, I must wait a couple of seconds before my touchpad enables itself again. This feature was added to stop people from accidentally pressing the pad while typing.
View 2 Replies