I got me a new microphone and like most all microphones for PC there is no on and off switch, so on that note how can i mute and unmute it quick without having to click several things to get to the mute stuff. It saves also having to unplug and plug it in every time which would eventually we're usb ports out.
I muted the sound and cannot unmute it. When I play music I can see that the speakers are showing the sound level but there is no sound. Restart works, but basically when I mute I cannot unmute the sound.
Windows 10 seems to have changed the permissions settings to all my files and folders - and I have lot of them (documents, photos, music etc).
I must have at least 30 000 images stored as I'm a pro photographer and thousands of documents. I currently can't save or change anything as I'm told the files are read-only and I don't permission to do that. This is seriously delaying my work.
I'm not on a network and I am the administrator.
A) There is a universal way to do this throughout my drives (C and D) quickly or if I have to do it by folder (which could take forever).
B) The easiest way to do it.
C) Microsoft are aware of how they have seriously messed up our computers and if they are doing anything about it.
I have the Hyperx Cloud II and the Logitech Z523. The headset is connected with and USB cable and the speakers use the normal 3.5mm jack. It's just annoying to go into playback devices and set it back to either one, so my question is that is there a faster way to do it? Also, I have windows 10...
How to create a Dial-up, broadband connection shortcut placed on the desktop. B4 the shortcut I had to:
-1- click on the R-side of the task bar icon -2- Click on the broadband strip on top -3- Click on the connection -4- click on Connect
Creating a shortcut from there (Settings -> Network & Internet -> DIal-up) onto the desktop actually creates an extra step since it defaults to VPN instead--and even if it didn't it would still be 4 steps. Is this any way to make this a 1 or 2-step process?
Im New Member and New User for Windows 10. This is My 1st Thread..I Want This Icon as ICO to Use for Shortcut Icon and Pin to Taskbar (I Think Size is 128x128 ?) (Use for NirCmd)
I am running the latest version of Windows 10 on an HP all-in-one desktop computer (27-1015t);
When listening to music, from the computer's CD drive or from iTunes, I like to turn off the computer's built-in low-fi speakers and instead listen to a pair of external powered speakers, which are connected to the computer's audio out connector;
Before going from Windows 7 to Windows 10, I could mute the built-in speakers without muting the output from the audio out connector;
Now under Windows 10 I can't find any way to mute the built-in speakers without also muting the output to the external speakers. One might think that the connector where I plug in the external speakers jack would automatically disconnect the internal speakers, ( as is true on iPhones, iPads, and the like) but that doesn't seem to be the case.
Is there any way under Windows 10 to play the external speakers only? Or is that HP's problem rather than Microsoft's? Since I *was* able to do it under Windows 7 but I can't now, it seems like a problem relating to the OS change from 7 to 10.
This is not okay at all. How can I make them not mute when I minimize them? Someone asked me to go to Settings>Privacy>BackGround Apps.iHeart radio is set to on and that has no difference. Groove music is not listed.
I am running Windows 10 Professional with current up-to-date updates on my Dell Inspiron Laptop.
Several days ago I noticed that plugging in current headset no longer muted the internal speaker. I know that it is not the headset as it works perfectly on another computer.
Doing a web search has not resulted in finding the problem, let alone a solution. Further my anti-virus is up-to-date, as are the microphone and speaker drivers.
I have an MXL 990 microphone (xlr), and a Line 6 Studio UX2. When I plugin my mic, I see in the pod farm software that I am getting signal, and enough volume. However, my system doesn't pickup any sound at all. I have set the correct device as a recording device, and it still doesn't work.
The Audio interface picks it up, but nothing else on my pc does. Skype, teamspeak, etc.Also, it worked fine before I got windows 10.
I updated my computer to Windows 10 Pro just few hours ago. I experienced some problems with the video drivers, but I solved them by updating the driver through nVidia GeForce Experience.
Now I have problems with my audio driver (which I think it is VIA HD Audio). My computer does not recognize my external microphone, only the internal one (which is not of the best quality). I looked for the drivers in the ASUS website, but I have found only outdated drivers for Windows 8. Then I saw the "sticky thread" on tenforums in this section and I tried to download the driver, but I do not want to mess up everything else as the site says:
Audio drivers available for download from the Realtek website are general drivers for our audio ICs, and may not offer the customizations made by your system/motherboard manufacturer. To be sure you obtain the full features/customizations provided in your original audio product, please download the latest drivers from your system/motherboard manufacturer's website.
So I'd like to find a good driver for my own PC (which is an ASUS G75).
In addition to it, it seems I have installed VIA HD Audio Control Panel, but I cannot access it because no window is shown when I start it.
I have a Centrios Desktop Microphone with a 6.4mm Jack. My Lenovo Thinkpad Edge E420 obviously doesn't have a 6.4 mm Audio Jack but it does have 1 Jack for both Audio and Microphones. I found an adapter from 6.4mm Female to 3.5mm Male. When i plug the Microphone into the adapter and the adapter into the Laptop it weirdly plays music out of the microphone and thinks it is a Speaker according to the control panel. I also have a splitter to make the 1 dual jack into two separate microphone and audio. I am not sure how to get the Desktop Microphone to work as a microphone.The Microphone will work on any other computer with a single microphone jack.
Ever since I have upgraded to Windows 10 I have lost pretty much all of my bass in my headphones and my microphone now sounds like a robot to a point that you are not even able to make out what I am saying. I have a Realtek audio card and I have tried playing with all of the settings. It recognizes everything as being plugged in as well.
So a few days ago I finished my new build, I went for for Win 10 with DirectX12 in mind. However, my mic does not work, neither through the front or back panel. The PC detects that an audio jack has been connected, detect the mic through both panels, but the mic itself does not pick out any voice. I tried reinstalling Realtek drivers, motherboard drivers, raising the level on Recording Devices and none worked. I'm using ASRock x99 Extreme3 Motherboard. Is there anything else that I can try? The mic works on my laptop and any other device, it's a Steel Series Syberia v2 Headset. Just updated Realtek Audio to 7720 v and still nothing.
I am plugging earbuds with a microphone into my computer. (I have tried every 3.5mm port on the computer and speakers, none work). Where ever I plug them in I get a notification saying something was plugged in. Can hear sound out of the headphones only when plugged into the speakers but I can not record voice audio.
When I turned on Cortana for the first time, I was prompted to read a certain sentence out loud in order for my microphone to be automatically set up and adapted to Cortana. Because I was a bit nervous using Win 10 for the first time, I said Hello Hello Hello in stead of the prescribed sentence. My microphone was set up on this clumsy basis. Now Cortana will only recognize the word Hello when I say it. How can I create another opportunity to adapt my microphone to Cortana by saying the prescribed sentence?
Since installing Windows 10 my desktop will no longer recognise any external microphones, i've tested the microphonse elsewhere and they're working fine. The only place on my pc that will still recognise the microphone is Skype which only shows it in the settings in the form of the green bar moving; Echo and other skype calls will not read the mic.
So, after fruitless attempts at fixing the issue using other people threads I've decided to create my own.I'm one of those unlucky to be bugged by sound issues after an upgrade to Win10 from Win7. My Siberia v2 headset microphone doesn't work.
What I've tried:
1) Updating the VIA HD drivers, including the latest pack for Win10 (the one that marks your devices with (Win10)). 2) Lowering (and increasing) the bits and sampling rate 3) Installing the older drivers in compatibility mode. The one for Win7 gave me a blue screen and failed to install, Win 8.1 drivers made no difference, mic still didn't work. 4) Installing the generic Windows high definition audio device drivers. No difference.
The new driver pack from VIA still fails to set the correct device as default, enabling 'Headset' from the front panel which isn't even connected inside. Now, the 'speakers' option enables the audio playback, but microphone is still unresponsive. It behaves strangely, sometimes the volume indicator seems to be picking up noises, but it lasts only for a few moments after which there's nothing. Obviously, I've checked the micro on another PC and it works fine.