I just installed the TP Link T6e 1300 WiFi adapter card and everything was ok until I noticed that all my applications are launching in 32-bit instead of 64-bit. Some programs won't open, but are "running" according to task manager in 32-bit. Is there anyway I can troubleshoot this?
OS:
WIndows 10
Expansion Card:
TP Link T6e 1300
MB:
ASUS P8 z77-v lk
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
Just got off the phone with Microsoft. They said that this option is not currently supported. In fact, they told me there was no way to even move the Onedrive directory. This was the big selling point for buying a tablet with limited storage.
View 1 RepliesI am using a HP laptop (Probook 4530s) and I want a completely fresh install removing all there little annoying partitions and applications. I would just refresh but I am wondering if that would work, as the bios is liked to HP softwareWhat would happen with the bios?
View 1 RepliesI am running windows 10, and have just upgraded from an Nvidia geforce gtx evga 670 2GB, to a Nvidia geforce gtx evga 980ti hybrid. But now my computer wont shut-down properly, what happens is I click shut-down and windows 10 shut-downs (black screen), but then my fans on the computer are still running. I can restart the computer fine it just won't shut-down properly, also nothing is showing up in event viewer for kernel-power.
My system specs:
Case: Thermaltake level 10GT
Motherboard: Asus sabertooth z77
PSU: Cosair 1200
GPU: Nvidia geforce gtx evga 980ti hybrid
CPU: Intel core i7 3770k ivy bridge
Sound card: Xonar D2X asus
SSD: 120GB corsair neutron ss
Hard-drive: 1TB
I have a HP pav 500 something or other and it cannot keep a stable connections ( for more than 2 seconds) to my wifi. The wifi card is a Qualcomm Atheros AR9485 802.11b|g|n WiFi Adapter and always worked well before i installed Win 10.I got fed up tryin to fix driver issues so i bought a usb wifi card. It is ment to relay 150mbps but mannages 1-2 Mbps. i have speed tested my phone on wifi in the same location as my HP pc and my phone recieves 35Mbps.i have tried updating the drivers but all seem up to date.
View 2 RepliesAfter I upgraded to Windows 10 I am unable to click on any link in Outlook 2003. I get a popup that says "Locate link browser". I searched for a solution and read that I needed to associate it with IExplore.exe. After doing that, now whenever I click a link it opens IExplore to my home page. How I can resolve this error and get it to go to the URL rather than just opening IExplore?
Instructions I found were these but don't seem to apply to Windows 10:
On the desktop, double-click My Computer.On the Tools menu, click Folder Options, and then click the File Types tab.In the Registered File Types list, click URL:HyperText Transfer Protocol, click Advanced, and then click Edit.In the Actions box, type open.In the Application used to perform action box, locate Internet Explorer (Iexplore.exe), and then click Open.In the Application box, type IExplore, and then click OK.
I have installed Windows10 on a Gateway FX530 desktop PC. All has gone well with one exception. The OS seems to recognize that there is a card reader attached, I can see them through Device manager. When I insert a SD card the system completely ignores the device and will not allow me to access it. I have tried to change the drivers, without success. This card reader worked just fine with Windows 7 Pro and there was no indication that they would not work with Windows 10 when I ran the upgrade test.
View 2 RepliesI have tried inserting my card into slot, I get message, connect a device and try again.it wont read the card.
View 1 RepliesI recently purchased a computer with Windows 10 32 bit installed. The guy I bought it from said there seemed to be something wrong with the RAM (8GB installed but only 3.25Gb usable). I checked the RAM and it was all OK, then doing a little research I found that this is common for machines designed for 64 bit. My computer system indicates that it has a 32 bit operating system, x64 bit processor. I have downloaded the 64 bit ISO file but when I open the setup.exe file I get a message telling me that "this app can't run on your PC".
I have talked to a Microsoft techo through the chat option who confirms that my computer is able to run 64 bit (after I gave the techo direct access to my computer). At that stage I was seeking assistance with the 64 bit download which the techo resolved. After the successful download I am now having a problem with the installation.
I have downloaded Windows 10 and created multiple USB's using Rufus/Windows 7 USB Tool/Even The Win 10 Creation tool, however everything time I try to install using UEFI the USB drive is never detected therefore it can't boot. I change it to legacy and it does boot and will only install the 32bit version...
I have downloaded the 64bit image only numerous times, created it with either with one of the above methods, even with Rufus settings correct, I can never install the 64bit version. As a test I did the same steps for Windows 8 media and it works fine under UEFI and install the 64bit version.
UEFI is selected in my bios, secure boot is off (even tried it with it on) - Even burn them all to DVD to no avail.
PS I even install the 64bit version of 8 then tried to run the setup within the ISO of 4 different downloads of either both images and the 64bit only image but all state that I need to insert the 64bit media and setup can not install.
Have upgraded from Win 7 to Win 10 a few times already and keep going back to Win 7 'cause it system slows down (start up and shutdown) after second reboot on Win 10.
It takes about 30 seconds to load on Win with all kinds of installed programs. Win 10 takes at least twice the amount and i have barely loaded anything yet.
My windows 7. 32 bit laptop gave up the ghost and is completely defunct. I had backed this up to external hard drive. I now have windows 10, 64 bit laptop and would like to recover, if possible, some of the files from the backup drive.
View 1 RepliesI have a 64-bit desktop PC with 8GB RAM installed on it. I had installed 32-bit Windows 7 Home on it (when I purchased the O/S DVD, years ago, I only had a 32-bit machine). Yesterday, I upgraded it to Windows 10.
"This PC >> Property" shows :
-- Installed Memory (RAM): 8 GB (usable 3.4 GB) (less than half)
-- System type: 32-bit Operating System, x64-based processor
Thus, my installed memory remains underutilized. This situation can be rectified by changing the Operating System from 32-bit to 64-bit, I guess. But, the question that I face here is "How do I do that"?
If I attach a HD that has Windows vista 32bit to my computer that have Windows 10 64bit (an SSD). Can I transfer music off that old drive and store it on to a storage HD?
*Windows 10 64bit is on the SSD
*I have a 1TB HD for storage
*The old drive has windows vista 32bit
I have several computers running Win. 10!
This problem only occurs on my 32bit machine, where the Left Click Mouse on Start Panel doesn't work any longer?
store app not launching in my windows 10
View 1 RepliesToday I've been setting up my new rig and I've been hitting an issue, some programs will not launch. The three main programs I've been having issues with are:
-Paint, won't start no matter what I do
-Geforce Experience, starts the launcher but wont open the main program
-League of Legends, Launcher works but trying to start the game usually wont work.
I've tried various compatibility modes and administrator modes with these and yet nothing, not even an error.
One of my window 10 machine has issues with launching shortcuts (it goes straight to properties) and right clicking the desktop/tray/taskbar doesn't nothing.
View 4 RepliesGTA 5 don't work on my windows 10 X64 , every time I receive error 0xc00007b , I just tried all solutions (that I saw here: [URL] ....) , but still don't work.
View 2 RepliesI have just upgraded my windows 7 to windows 10 and everything seemed to go through as expected. However I have found that now when I click the Start Menu nothing happens, it is similar for the Search Bar, Network, Volume, Notifications, etc.My biggest problem is that I can't get to the Settings app to roll back to windows 7.
View 1 RepliesFor the past few weeks, File Explorer in Windows 10 launches at random during the day. No keyboard action is involved...it just launches.
Is there a way to defeat this behavior or is this just a bug within Windows 10.
I have a new computer that came with W10 installed. Now one week on the above apps fo not launch. I have run System file Checker that reported it had found and repaired corrupt files (already!!). However the apps still do not launch.
View 9 RepliesI have been trying for hours to install windows 10 home on my newly built PC but i can't because there is a problem. I bought the usb version since i don't have an optical drive bay.
The problem: I can start the setup, but when i launch the installation my pc suddenly restarts and boots the usb again, so i get back at the 32/64 bit selection screen. This happens when i click "next" after choosing my drive (see included video). The drive i'm using is a Samsung 850 EVO SSD.
I have tried numerous things to fix it including: removing the ram (2x8GB) and putting it back, trying with one ram stick, removing the graphics card and use the integrated graphics card, use different usb ports, use different sata ports, removing the hdd (i can't even start the setup with the hdd plugged in).
I also downloaded Windows 10 from the official website and put it on an other usb stick, the same problem occurs.
I even tried with Ubuntu and the same problem happens!! When i launch the installation my pc reboots and the setup restarts!
I have made a video showing what happens (win 10): [URL] ....
I also made a video that shows my BIOS: [URL] ....
Everything looks fine... but it doesn't work!!
I seem to be unable to launch the media creation tool. Everytime I try to run the .exe (even in safe mode or as an administrator) after I get the UAC dialog nothing happens.
I don't get any kind of error dialog or even see the program or process in my task manager.
I have windows 10 running in Bootcamp ( MacOS. I upgraded to Windows 10 pro from Wind 8.1 Pro.
After upgrade I notice that Maps app and Photos app keep launching automatically , even after closing them. I'm not sure what is triggering them.
I have verified that these apps are not in autostart ( msconfig).
