Is there a rugged copy program that can copy a partially corrupted file (*.mpg) from a CD/DVD onto your H/D? What happens is that when the normal windows copy operation encounters that portion of the DVD that is faulty, it tries over and over again (endlessly, it seems) and then just hangs and I have to reboot, forcing that irritating wait for it to scan the C and D drives on reboot. This occurs with any program I try that attempts to read the entire file from the DVD, such as PowerDVD, windows explorer copy, Media Player, windvd, dos copy, etc. I assume it is because a cluster with a faulty cyclic check is encountered, and the windows read operation can't just accept the data anyway and proceed, but, instead, keeps on trying to reread and getting the same cyclic error over and over again.
What I need is a read option that "accepts" the error, transfers the bad cluster as it came across (errors and all), and then continues until it reaches end of data. I get this when some of my home-recorded mpg movies hang up somewhere in the middle, but, if I know in advance and skip over the bad part, the remainder of the movie plays just fine. I need a program that will ignore the cyclic error and just go on. I know we had this back when I did mainframe programming (the ACCEPT option), so I wonder if there is any windows program that does the same for mpeg files on CD's or DVD"s.
I have a gaming rig I bought a month ago. It wasn't set up right, so I'm formatting the drives and starting from scratch. I'm trying to copy 60GB of stuff to a external drive before I wipe it. It's been going for about 6 hours now and stuck at 99%. It says that there is 0 bites remaining, and 25 seconds. It's stuck there and won't change. Should I just cancel it, because 0 bites are remaining I assume everything is there.
I had reserved a copy of windows 10 and i was able to download it through windows update. once it is downloaded i was asked to restart for updating. copying files stuck at 0% for 5 min and windows 7 ultimate x64 rolls back.
I can even see an error message in windows update page shows Windows 10 Pro installation failed error 80070006
The first time, it hung at 26% total, 89% copying files. Then it bricked my system completely so I made a clean install of Windows 8.1. There was nothing else installed than Windows & Updates.
Tried to update it with a stick made by the Media Creation Tool --> Stuck at 23%, 77% copying files.
I tried everything: Disabled Network Adapter, pulled all Cables (only mouse left) out, I also detached my second HDD.
I am trying to install Win10 on my SSD (Samsung 830 Pro, 130GB). I am running a Z77 Chipset.
I'd love to install completely new with the Image but that doesn't work because of the activation later on..
I'm stuck with a fresh Windows 8.1 install now, that's not really what I wanted. I'd love to update to 10 since I had it as a Insider too.
I have made several attempts to upgrade my desktop from 8.1 to 10. Each time the install freezes at the "copying files = 3%" point. When I reboot the system returns to my 8.1 setup and shows the above code with this explanation. "Installation failed in SAFE_OS phase with an error during APPLY_IMAGE operation"
First time running into issues with my SP3. Was able to download the latest build without any issues. Restarted and the overall install is 18% (blue ring has disappeared) and the Copying Files step is stuck on 63%. Been like that for 15-20 minutes or so. Should I wait it out or try to shut my Surface off?
With Windows 8, if I copy files or folders from one disk to another, a window appears which shows the progress. This is very useful. Windows 10 does not show this window. Is there a way to make it appear?
With Win7 I used to open one external drive, then through My computer locate the other drive. I would have each drive on its own window. I could then select relevant files on one drive copy and paste into the other drive. With Win10 if I click on File explorer I can open one external drive, where can I locate the other drive to put in a separate window. If I click on the other drive, it just opens it in the same window. Win7 and previous versions used to be so simple.
I just got a new 8tb external drive and this started happening. 2.5 gb file mkv..It'll have a burst of write speed completing 60-80% and then slow all the way to 0 and just trickle the rest, even though it fluctuates from as low as 5 up to 30-50mb until it's done.
I have tried to upgrade from win7 to win10 after copying the files and the system restarts, I will get the error 0xc000000f. I have both win7 and win10 disks and the automatic repair would not work.
Apparently this has to to with some bios settings, I have tried to follow the guide but I do not have all the options to described in the guide below.
[Solved] Error Code 0xc000000f Windows 8: A Required device isn’t connected or can’t be accessed
Specs: Processor (CPU)Intel Core i7 Quad Core Mobile Processor i7-3630QM (2.40GHz) 6MB Memory (RAM)8GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (2 x 4GB) Graphics CardNVIDIA GeForce GTX 660M - 2.0GB DDR5 Video RAM - DirectX 11 2nd Graphics CardNONE Memory - Hard Disk120GB KINGSTON V300 SSD, SATA 6 Gb (450MB/R, 450MB/W) 2nd Hard Disk1TB WD SCORPIO BLUE WD10JPVT, SATA 3 Gb/s, 8MB CACHE (5400 rpm)
Recently I had to reinstall Windows 10 on my laptop. Earlier I had downloaded and installed many apps from Windows Store. I have a copy of C:Users{user}AppDataLocalPackages with me.
Is it possible to get back the apps by copying the entire folder to my machine? Is there any option to get back the apps? Or should I download and install them once again?
Just when I was happy with my installation I error checked my main C: drive with is a Samsung SSD, Windows reported that it had found some errors and it needed to be rebooted to correct them. I rebooted the PC and the check disk did it's repairs and it booted back in to Windows. I noticed straight away that the start menu had stopped working and when I opened Windows Explorer or did anything within it (like right click properties) or any settings windows like control panel it would take for ever. Opening programs like Internet Explorer work fine.
I have tried System Restoring to before I did the drive repair and sfc /scannow and Dism/Online/Cleanup-Image /RestoreHealth but I still have the problems. The SFC found errors and corrected them but still no Start Menu.
I do have a Trueimage backup from Last Friday which I will have to use if I cannot sort this out. Yesterday due to a on going occasional BSD I had fully uninstalled my Nvidia Geforce Video drivers using a utility that was recommended to me on this forum, I then reinstalled the drivers and it had been fine up until I did the Scan for errors so I don't think it's nothing to do with that.
Even when using disk cleanup in admin account it will say deleted but after restarting and going back into disk cleanup they are back.Even using Windows app they come back after deletion.On another note system restore doesn't seem to work , i did a system restore and even though i got the message that system restore completed successfully after i rebooted my screen was frozen and i had to do a system refresh to get it up and running again.I have been waiting for it to delete my temp files for 8 minutes already.
Just upgraded to Windows 10, and now all of my acrobat files open with through internet explorer (whatever its called now) rather than through the acrobat program. As I result, I cannot edit my pdf files.
I am using Windows 10, and I am trying to copy one folder to another folder using File Explorer. If I click on a file folder, I find that the "Copy to" and "Move to" icons are both greyed out. The only option that I find available is the moving or copying of individual files. I need to move folders with a lot of files and sub-directories in them.
Is it at all possible to take the OS, already installed, from your PC and put it onto a USB? I plan on getting Windows 10, but want to be able to revert to Windows 7 if I don't like it. (I don't have the computers disks, as it was a hand-me-down birthday present from my older sister.)
I have just upgraded to Win 10 but now when I try to save pictures from my Nokia it says access denied, even the Nokia suite does not sync? I tried to use snipping tool to capture the dialogue box but I can not save that either, tho I have copied it below. I have lowered UAC status, but that does not work?
I am using Win10 10240. I have a problem copying a large number of big files. The setup is a bit tortuous.
The source is an old WD Cloud NAS on ethernet via my ethernet connected router. The destination is an external hard drive on USB3.0
Using file explorer, I drag a bunch of folders to the destination and copying begins but either stalls soon after or indeed never starts. When it works the speed is around 10Mp/s but why does it stall at random places?
I've tried just copying a single folder too. Single files are OK. I've looked at the resource monitor and so on and can't see anything odd although I'm no expert there.
I don't know of any other way to get these files across. The WD Cloud software is hopeless and not fit for purpose in my view. Would a command line xcopy batch file be better? Or third party stuff?
Even though I had only 1.3GB used on a 32GB SD card, I could not copy a 7GB file from my C-drive stating there was not enough free space. Why and what to do.
BTW - the sd card was NOT formated in FAT32 and was formated in the NTFS.
I have noticed a bug in windows 10 home.Copying any file from/to a pen drive connected to my windows 10 PC is very slow. Transfer speed is 5mbps maximum.Same file is transferring at normal speed(20-25mbps) when I transfer it within local drives(i.e. D drive to E drive) Hence I can say, transfer is slow in case of PC and Pen drive ONLY.
P.S: 1) Same pen drive is working perfectly in another PC having windows 8.1 running. 2) Drivers are up to date. 3) I upgraded(not done clean install) from Windows 10 insider preview to Windows 10 home.
I'm recently upgraded form windows 7 to windows 10. I'm facing the annoying issue that windows explorer steals the application focus after it finishes copying files and comes to front. Any option to disable this behavior?