Apps :: Java Update Scheduler Process
Nov 6, 2015
I've been having this issue with Java Update Scheduler running on his own and ramming my CPU usage to 80%, 10 to 15 minutes every time after I boot the PC, and every time I need to manually close it. I've searched it up online and people recommended setting s manual task scheduler for it, I did, it didn't work .
Some people recommended disabling "check for updates" in the Java configure window but I didn't even have Java installed, where this came from and how that process starts and why. So I installed Java, disabled updates and I still get this issue every time I boot the PC, I officially give up since I don't know what to do anymore.
View 6 Replies
Similar Messages:
Nov 3, 2015
Installing Java on my (fairly) new Windows 10 64-bit machine. On my previous version of Windows (Windows 7 64-bit), I had Java (32 bit and 64 bit) installed, and it worked perfectly. However, I can not get it to install on my current machine, no matter what I do?
I downloaded the offline installer for Java 32 bit, and 64 bit, from the manual download page: Java Downloads for All Operating Systems. Upon trying to run the 32 bit installer (which you are supposed to install first), nothing appeared to happen. So I left it for about 20 minutes, and found it still wasn't doing anything when I came back. So I brought up my task manager to check if anything was running in the background, and found "Java Platform SE Binary (32 bit)" running there. As it appeared to be doing nothing, I ended it, and tried running it again, only for the same thing (nothing) to happen.
I then tried the 64 bit installer, thinking maybe something had changed, and Windows 10 just didn't need the 32 bit version (upon later research finding that this is an incorrect assumption on my part). Same story with the 64 bit installer as well.
Frustrated, I tried to search my computer, to see if it had added anything. There were no new program entries, and no Java section in my Control Panel, but there was a new folder in my Appdata, LocalLow, called "Oracle," containing a Java folder, with a "jre1.8.0_65.msi" file.
I tried to run the MSI file, but got the following message: "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I tried their official support on this matter: Error 1721: There is a problem with this Windows Installer Package. But none of the listed steps, even all used in conjunction, did anything.
I also tried their online installer, rather than the offline one (even though I need to use the offline ones in the end, because I need 64 bit), and it had the same issues.
In short, I run the installer, and nothing happens, no window, no errors, it just runs in the background indefinitely. I have tried installing in safe-mode, verifying/repairing my system files, running the installer in all available compatibility modes and as administrator, turning off my firewall and anti-virus softwares, and nothing has worked thus far.
View 7 Replies
Feb 23, 2016
I seem to have two instances of Java installed on my Win10 Pro 64-bit Laptop .. see screenshot below. Can I safely uninstall one of them?
If "yes" then which one? I have no clue how I ended up with 2 x Java installs on my laptop. I'm assuming I should keep the 64-bit install, and delete the other? I use Chrome as my usual browser, but very occasionally use Edge
View 3 Replies
Dec 16, 2015
When installing a software, I keep getting an error like the attached pictured
My PC is Win 10 64
The Program to run is in 32 bit
Java 32 is installed
Java was tested using Explorer browser
View 4 Replies
Feb 10, 2016
I reinstalled Windows to try to fix an issue, but it did not work. I am installing my programs to an alternate drive, and would like to install Java there as well. I know about the JRE_HOME environment variable, but it can only point to 32 OR 64-bit Java. Is there any way to have both running simultaneously without need to switch the variable to the 64-bit path? I think that this does happen when I install to the default location, so how can I do that?
View 3 Replies
Aug 7, 2015
I have installed Speedfan and it won't run at the windows startup, so I tried to schedule it in task scheduler, I am not familiar with using it and wondered if there is a guide for W10 64
View 2 Replies
Aug 11, 2015
During the installation in Windows 10 crashes 25% ( I have a PC with windows 7 and I have the upgrade to Windows 10 with a reservation ). It is already the third time that I try to update it always crashes on 25 % ..
View 1 Replies
Aug 7, 2015
When I open the Task Scheduler, I get many error messages, which mostly resemble to "Task Name: The task object version is either unsupported or invalid" along with a few "The selected task 'Name' no longer exists. To see current task, click Refresh".
One thing I noticed, the tasks were all/mostly (I haven't fully checked) outside the "Microsoft" folder under "Task Scheduler Library" based on my research into the Registry Editor. I have also deleted a few with a back up for each, but, if I try to restore the registry files with elevated rights, I get an error message: "This app can't run on your PC - To find a version with your PC, check with the software publisher". This includes the "regidlebackup" task which I shouldn't have deleted, but it does not want to be restored.
I don't think this occurred before I upgraded to Windows 10 from Windows 7.Also, I could revert back to Windows 7, but the problem is if this issue would be solved by doing so.
Computer Specifications:
Dell, XPS 8300. Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz 3.40GHz.
12 GB RAM, 64-bit Operating System, x64-based processor.
I have tried listing the tasks (before the changes in RegEdit) into a text file. For privacy, I have replaced my name by "????".
test.txt
Due to no one responding after 2 days or so, I took the risk of deleting the entries corresponding to the tasks' name in the registry after having exporting each entry. So far, the computer seem to work even after a restart and the Task Schedule shows no error after being opened and the logs/windows in the middle also work.
From my guess, upgrading to Windows 10 failed to delete the old entries after re-arranging them in the registry.
View 5 Replies
Oct 7, 2015
I'm trying to set up a task using Task Scheduler to run a game which is on one of my secondary drives, drive F: - I have Windows 10 installed on the C: drive.
The problem I'm having is Task Scheduler doesn't seem able to start a program if it's on any drive except C: - I can create a task to run any program or open any file if it's on the C: drive, but nothing runs if it tries to access the F: drive.
As an experiment, I created a simple task to open a jpeg picture - it opened no problem on the C drive, but on the F drive I was prompted to pick an application to open it with (I chose Windows picture viewer) after which the jpeg wouldn't open/load.
What I can do to create a task which will run on my F drive?
View 4 Replies
Oct 16, 2015
Windows sometimes update at inopportune or bad times.. Example: Today I was backing up files and the processed stopped for a noticeable time. I could not restart the process or shut the process down so I tried to restart the computer and that would not work so I had to turn off the computer to restart it. Problem was that the computer was in the middle of downloading and installing updates without my knowledge. It took awhile for the installing to complete. Is there a way to control this process.
View 2 Replies
Nov 12, 2015
So after having numerous issues with my ASUS VivoTab Smart upgrading to Windows 10 (Sound issues, display driver issues, losing my Recovery Drive, etc) I finally got everything fixed and my tablet was finally running as wonderfully as it did on Windows 8.1..... For about a week.
And then this latest build for W10 comes out. I downloaded it and then attempted to install it
The system restarts to do the update with the circular progress bar but then gets stuck at 40%. I have had this problem on three different PC's in the past and all I did was power them off, boot up again, and then it would finish off the update with no further issues.
But that didn't happen this time. I powered off my Tablet and then started it up again. Instead of carrying on, W10 decides to cancel the whole update and roll me back to am earlier version of W10.
I thought I would try again and this time wait longer. Maybe I was impatient. Went through the process again, rebooted, started the update install and then stuck at 40% yet again. I figured I would just plug my tablet in and leave it while I slept surly it would finish by the time I woke up. Nope it was still at 40%
Powered it down because I couldn't do anything else, but it decided to roll back again. What's worse is that it seemed to have rolled back to a version of W10 prior to when I got everything fixed mentioned above. So now not only am I stuck with a dud upgrade that keeps trying to install after a period of time, but I have to fix all my previous issues again. How to resolve this update freeze?
View 7 Replies
Sep 7, 2015
I recently I was attempting to upgrade my OS to Windows 10. In the middle of the process my computer shut itself off. I was attempting a manual install of the OS, as described on [URL]... . I managed to completely finish the download before the computer shut off. Is there any way to continue from where I left off? Without restarting the download?
View 1 Replies
Jul 29, 2015
It's interesting to see that after i "disabled" it from the options, the process Cortana is still running and is tied to searchui.exe . And after deleting Cortanaware, the windows search bar stopped responding!
Is there any other way to stop this from the services or something? i've looked for it and found nothing. It's funny how MS tells you Cortana is "disabled" but the process in task manager is still up and running just fine.
View 9 Replies
Nov 2, 2015
I am having trouble accessing MS app store and also updating office 2016 through any of the office applications.
My question is, will win 10 apps and office 2016 default update through windows update?
View 3 Replies
Jan 2, 2016
I was trying to open a jar file, so I opened with any other program like adobe reader, didn't work.
I realized I needed to install Java, and did, but now it wont choose java as one of the apps to use to open it.
I've tried a lot of things before asking this, including downloading Java, setting it's destination to the desktop, and tried using the executable files in that to run the .jar, so now I can't tell if any of those files are the correct Java.
View 9 Replies
Aug 25, 2015
I have java installed on my machine, but can't see it in my browsers, FX or Chrome ( I know it won't work in Edge).
I have checked the box 'Enable Java controller in the browser' under the security tab in Java Control Panel.
View 1 Replies
Aug 18, 2015
I am trying to run a program with Java software in Windows 10, yet it is not letting me. I have been reading that it has been an issue after the update.
View 1 Replies
Apr 14, 2016
I noticed recently on Teamspeak that I've got some packet loss, up to 10% at a time. This has shown itself in games as well, most notably League of Legends where my ping will be stable, yet I lose control of my character for up to five seconds at a time. I tried doing a test on pingtest.net but it says that Java doesn't seem to be installed on my browser, why? I've un-installed and re-installed Java but it still says this message: "Pingtest.net requires Java for packet loss testing, but it does not appear to be installed in your browser. Click here for assistance."
View 11 Replies
Dec 21, 2015
My computer is Windows 10 64-bit and i cannot install java. I have almost tried everything,i have downloaded all the latest versions of java offline and online and it still doesn't work i have tried installing older versions but still nothing happens. I click the java installer, I click yes and nothing happens. i cannot play several games with this problem.
View 1 Replies
May 13, 2015
While accessing a site to activate Java permission ..Spartan does not access Java permission as Internet Explorer does.
View 16 Replies
Aug 9, 2015
Whenever I open something that uses Java it always crashes and says this: [URL] ....
Is there something I can do to fix it? Should I install a different version of java?
View 1 Replies
Oct 14, 2015
I've been trying to install java but the installer just looks like a blank window.Java installer not working. URL....
View 1 Replies
Oct 10, 2015
I have reinstalled java and have java 8 u 60 64bit. i have set factory default on my router. i have restarted the computer and minecraft.
Oother places say minecraft can't communicate with itself, although java is allowed in firewall both private and public..
java.lang.ExceptionInInitializerError
[10/10/2015 18:26:35 PM] at net.minecraft.server.MinecraftServer.<init>(MinecraftServer.java:146)
[10/10/2015 18:26:35 PM] at net.minecraft.server.integrated.IntegratedServer.<init>(IntegratedServer.java:45)
[10/10/2015 18:26:35 PM] at net.minecraft.client.Minecraft.func_71371_a(Minecraft.java:2091)
[10/10/2015 18:26:35 PM] at net.minecraft.client.gui.GuiCreateWorld.func_146284_a(GuiCreateWorld.java:230)
[10/10/2015 18:26:35 PM] at net.minecraft.client.gui.GuiScreen.func_73864_a(GuiScreen.java:225)
[10/10/2015 18:26:35 PM] at net.minecraft.client.gui.GuiCreateWorld.func_73864_a(GuiCreateWorld.java:377)
[10/10/2015 18:26:35 PM] at net.minecraft.client.gui.GuiScreen.func_146274_d(GuiScreen.java:296)
[10/10/2015 18:26:35 PM] at net.minecraft.client.gui.GuiScreen.func_146269_k(GuiScreen.java:268)
[10/10/2015 18:26:35 PM] at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
View 1 Replies
Mar 2, 2015
Every time I open a java program (netbeans, mc) it crashes after about 3sec. The aplications works when I run java 32-bit but I can't run anything with more then 1,5Gb of ram and if I change to 64 (deleting 32-bit and installing 64-bit)the aplications just crashes after 3sec. I've tried running both java 7 and 8 but it still crashes. I believe it's a problem with windows 10 but I'm not sure...
Error: Java(TM) Platform SE binary has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Close program
View 1 Replies
Sep 12, 2015
I cannot install anything from Windows Store. It will down load normally & then fail with error 80073DOA. Updates to Apps also fail to install with the same error. I have run wreset ( several times) but still no joy. Date & Time Zone are correct.
Windows Firewall must be enabled to allow the Store to Update & Install!
Found this by accident. I was running the Firewall that came with Norton Security. Why this is a requirement I don't know. Disabling the Norton Firewall was easy but there was no option to turn the windows Firewall back on as Norton had taken over so I went into Services & did it from there. All working fine now ))
View 7 Replies
Aug 10, 2015
Any apps I try and update attempt to install, but stay at 0.0mb downloaded, then it stops and produces this error: The happens with every app.
I read on some other forums on why this may be happening and someone suggested that it was because I had changed the permissions to the WindowsApps (C:Program FilesWindowsApps) folder so that I could view the files within it. Yes, I did try and change the permissions so I could edit the files within (I couldn't), just for fun and to see if it'd make any differences, so that is what I assume the problem is.
After learning this I tried to reset the permissions, how to, so I tried to replicate the permissions from a clean unaltered WindowsApps folder and it didn't work, no matter what I did. Windows Update doesn't even seem to fix it either.
So is there any way other than reinstalling windows to get the App Store working again?
View 1 Replies
