Daily is the name given to the new replacement for Mozilla Thunderbird. It often has daily updates, and the one today (08 Jan 2016) causes it to lose all email settings. As a result, when it start is shows no existing email, no email account, and looks like you are starting with a fresh install of a new email client.
To get around this I downloaded and installed the latest version of Thunderbird (38.5.1) and this did show all my email OK. So something bad happened to Daily - hopefully whoever it is who controls that software will fix it tomorrow.
Updated to the latest 10 update last night and Edge is almost unuseable. Takes about 5-10 minutes for the computer (esp Edge) to unfreeze and start playing nice.
I can see where one can choose which email client to use as the default in the system settings, but Thunderbird is not listed in the available options.
I see a lot of people have had the same problem recently but most when using Logitech/Synaptics. My problem is with the Microsoft basic optical mouse v2.0.
I cannot send emails from my laptop either with windows live mail or thunderbird all setting have been checked and rechecked I can send emails if I use the build in mail app and my outlook account I can also send emails via webmail it's just as if something is blocking outgoing mail ! Each time I try I just find the email sitting in the outbox and a error message saying unable to send or in the case of thunder bird just get the green line showing progress and it just sits there.
So, there was an automatic windows update on my machine a few days ago. It was some huge update that took hours, and afterwards it was acting like it had just installed Windows again. It had those placeholder screens saying how great Windows 10 was and that it was preparing my machine for first use, etc... I didn't have to do any major setup, like timezone and networks and stuff, but some of my regular apps had been reset and I had to reconfigure them. Other than that it seemed to be working fine.
However, something began happening that is causing me a lot of grief. Every time I am on YouTube or Vimeo, the videos will play for a few minutes, but then the audio drops out and then the video will stop playing. That is in Chrome. In Firefox, the video stops for a second and then it starts back up like the network dropped out (compression artifacts, etc...).
My network has been fine, it is 50meg broadband and is pretty solid. I have gone ahead and updated my audio (I have a G35 USB headset) and I updated my video drivers (nVidia GTX 980), rebooted the machine, rebooted the router and modem, and everything else that I can think of, but still the video does this to me. I also use sites like digital tutors, and their videos do the same thing. So it has to be something on my end.
I did try to go back and look at the update that was installed, but it wiped my update history as well.
i was using Windows 10 Enterprise . And from automatic update, i lost my most important files . But , i have now recovered them . Now, the problem is that only two apps i.e. Cortana and Microsoft Edge are coming . And i can't find store,outlook,news and other apps etc .
I just had to re-install W10 using the latest build offered by the Microsoft Setup Tool because W10 on one machine became corrupted somewhere along the multiple update path! No problems, except it seems that a few of the default settings are a little different than they were in previous downloads. Most are for the better. But...I can't seem to figure out how to turn off the display of all the disk drives in the Navigation Pane of File Explorer. I have five other systems that have migrated successfully along the update path and they don't look like the screen shot attached. What or where is the setting to turn off the display of the disk drives when the "This PC" is collapsed.
I recently did a reset on my Windows 10 laptop and it reset to version 10240. I am not being prompted to update to the latest version via Windows Update. How do I trigger the update to send TH2?
After installing the early January updates, I can no longer mount/linkto/attach my two NAS drives. They are connected through the same switch that my PC is on. I have updated the NAS firmware with reboot, and restarted the switch.
The Advanced Sharing Settings are set to "ON".
NB the volumes are mountable from my Mac under Yosemite.
I'm in a lurch on 10162. I haven't received an email to update to 66, and windows is telling I'm up to date. My friend got 10166 installed, and he's having an issue with resolutions, so I'm trying to install now.
After the latest update yesterday of win10, I was able to connect to the internet. But once my laptop was shut down, I've been unable to connect since. Rebooted wireless remote and double checked all of the connections. Defender took over as my firewall from Advast. I've been able to shut off Defender but am still unable to connect to the net. In my wanderings, I did come across "report" that information was being sent but nothing going past some unknown firewall. As far as I know there are only 2; defender and Advast.
The latest update changed a lot of my settings, like my mouse sensitivity, along with resetting my background to its default image and resetting my task bar to default. My biggest issue is that it deleted all my pictures in the "Pictures" folder. if they put them in the cloud? Or am I just fucked and have to go down to the head developers house and chuck eggs at it.
So after having numerous issues with my ASUS VivoTab Smart upgrading to Windows 10 (Sound issues, display driver issues, losing my Recovery Drive, etc) I finally got everything fixed and my tablet was finally running as wonderfully as it did on Windows 8.1..... For about a week.
And then this latest build for W10 comes out. I downloaded it and then attempted to install it
The system restarts to do the update with the circular progress bar but then gets stuck at 40%. I have had this problem on three different PC's in the past and all I did was power them off, boot up again, and then it would finish off the update with no further issues.
But that didn't happen this time. I powered off my Tablet and then started it up again. Instead of carrying on, W10 decides to cancel the whole update and roll me back to am earlier version of W10.
I thought I would try again and this time wait longer. Maybe I was impatient. Went through the process again, rebooted, started the update install and then stuck at 40% yet again. I figured I would just plug my tablet in and leave it while I slept surly it would finish by the time I woke up. Nope it was still at 40%
Powered it down because I couldn't do anything else, but it decided to roll back again. What's worse is that it seemed to have rolled back to a version of W10 prior to when I got everything fixed mentioned above. So now not only am I stuck with a dud upgrade that keeps trying to install after a period of time, but I have to fix all my previous issues again. How to resolve this update freeze?
When I initially installed Win10, it logged in with lightning speed (from the lock screen). After the update last weekend it takes longer to log in than it did with Win 7. or 8. How to speed up login time?
I'm running Version 1511 (OS Build 10586.3), 64 bit
OK so I received the update on my clean install of win 10 on my split Intel NVME SSD. Just went to do a Macrium image backup and discovered that the update has created an extra partition on my drive. Although small it is stealing space from my second partition that I save the backups to. I also have some extra files on C: as shown.
To regain space what files can I delete? Can I restore the extra partition without damaging windows. Do I need to include the extra small partition with C: for a Macrium backup to be able to restore if anything gets screwed? I was expecting the update to just update the C:/ drive.
after applying the latest cumulative updates IE11 is now broken on my system (W10 pro X-64)..Often the Main (home page) of a site works but as soon as you link to other links in the site garbled text often appears.Here's an example from BBC website. Main news page opens but link to a story and One can partly fix by pressing F12 and setting IE compatibility to IE10 or IE9.
My laptop did an automatic Windows 10 update Friday and restarted but no program will open now and I have to hold the on key to restart it. I get about 15-30 second after it comes up to click on something and it might open but will stop responding shortly after. I have got task manger to open once and only AVG was running but it frozen before I could click on anything.
I started in safe mode and removed the last window updates only to had them reinstall when it restarted.
What at can I do? Is this a virus or malware or did the latest update do this?
I have a Similar problem in which I cannot install the latest windows 10 update I get to 75 percent and then it says it can’t continue and resets.
My computer is a Windows 7 machine upgraded to Windows 10.
I have ran sacs scan and it found corrupt files. Done all the other scans that you have suggested and I did get that source/image is repairable.
Tried all the Command prompts DIM/Online and that would not work either.
Using Microsoft media creation I re download windows 10 Is Mounted it do a dad and pointed the DIM online source to F: it also says that source fills could not be found.
I have even tried to reset Windows 10 but that encounters problems as well
I have even tried to reset windows through ISO and that encounters problems as well.
Exactly as it says on the title. When I power it on, the GPU fans go full blast, it stays that way for a little while and shuts down automatically. There's no splash screens or anything either so I can't go into safe mode. Sometimes it shuts down almost immediately and then starts up again by itself. Sometimes it seems to start fine, the fans spin at their usual speed, but nothing appears on the monitor and eventually it just shuts down again, it's not properly booting up though because my drawing tablet's lights don't go on when I plug it in.
All this after the latest update. I restarted the thing so it would install the updates, but it got stuck on "Restarting" screen with the dot things spinning. I left it for several hours until I forced the shutdown and it has done this stuff since. I do recall the task manager not starting up from the security screen though.
What I've attempted so far: Taken the battery and power cable off and held the power button for atleast 2 minutes. Taken the second graphics card off. And reset the battery again. Left it overnight like that to see if it would actually do anything (As if). Started it up without the battery. Tried to get into safe mode, nope.
Ever since I installed the latest "service pack" of Windows 10, my start menu doesn't work and my battery doesn't charge. I've found work around for the start menu creating links on my desktop to my personal start menu and the all users start menu. For now, I just need to leave my computer plugged in. I've fixed the plugged in not charging in the past. But in the past, I've always had a laptop that has a removable battery. This laptop doesn't. But since all this is due to the major upgrade of 10, seems like there has to be a simple or common fix.
Issue: Track Pad Fingers 2 fingers Scrolling issue after latest Win 10 Update. Just after a Win 10 update for 'Asus Smart Gesture', the two finger scrolling is not working any more.
Troubleshooting steps: Uninstalled Restarted the system Fresh Installed latest version Asus Smart Gesture, but no go. Still exact same issue as above.
Expectation: I am expecting to be able to have the two fingers scrolling running as before. More so that it was working and now not since last update from Windows 10 for Smart Gesture Asus. Not having the two fingers scrolling is really tough.
I had a Surface Pro 3 running Windows 10 Pro that started giving very poor battery performance and the case was getting very hot.
MS agreed to either repair/replace under warranty but I needed to ship it back.
Before I shipped it back I did a Windows 10 System Image Backup to a USB drive hopeing that if MS replaced with a new Surface pro 3 I would be able to restore the Image to the new unit.
MS has as I thought replaced the Surface Pro 3 with a new one but I am struggling to restore the image to this new one.
It is asking for a recovery Key ?
Am I right in thinking that you can restore the Image to a replacement unit ?
