Apps :: Missing Backup Definition Files In Macrium Reflect?
Feb 23, 2016
I have two backup tasks that appear in the "scheduled backups" tab, and they run on schedule, but they don't appear in the "backup definition files" tab.
This happened due to an uninstall and reinstall.
How can I get them back into the "backup definition files" tab?
I still have the reflect folder in my documents, with the xml files that define the backup tasks. But for some reason, that isn't enough to get those tasks to appear in the scheduled backups tab.
Another minor issue: when I boot from the MR recovery partition, in order to run a restore, it doesn't know where to look for my backup files. I have to add the folder manually, and then it forgets again the next time.
MR Home v.6.1.1081
View 1 Replies
Similar Messages:
Feb 10, 2016
Trying to restore an image on to a RAID 0 SSD from stand alone version.
After loading the RAID driver Macrium SEES all the HDD's and can select images etc.
However when TARGET destination is chosen No HDD's are seen. !!!
Need fixing this --otherwise this backup software becomes USELESS !!!!.
Macrium --latest version.
View 5 Replies
Nov 17, 2015
I have the latest free version of Macrium Reflect. I think that I can only get support from the Macrium site with the full paid version. Since the big Windows 10 update last week, I seem to be getting errors in the backup logs. I have checked the Macruim backup logs prior to the update and they are all OK.
View 9 Replies
Feb 10, 2016
This morning I had a computer crash . Somehow it got stuck on an upgrade . I Booted into system restore and tried to restore to earlier date. Error message came up indicating I had drive issues so I continued with the offer to scan and repair the drive. After drive was "fixed" by windows , I could not proceed with the restore by clicking on next. Its like I am getting an loop of disc errors. I went back to the restore dialog and then chose a restore point .Computer started Restoration but then had an error that indicated it could not restore due to some problem with candy crush ! I then shut down the computer . Restarted it and went thru the HP Diagnostics and everything looked OK so HP diagnostics let me restore the computer ...but this time I had to enter my password to my msoft account and the restoration went smoothly.
View 9 Replies
Sep 26, 2015
Been trying M. Reflect free edition on a Dell Studio XPS 8000. I did as usual and created a boot rescue CD with the PE file with no problem. Then I continued to make an image of my boot disk C and save it on my hard drive D.
Went to D and the image is there. Next I booted with the restore disk without problems, but after choosing restore, I can't find the image that was created on the D hard drive. I noticed that the naming of the drives also has changed and as such I looked everywhere but I can't find the image and as such I can't restore.
View 6 Replies
Jan 20, 2016
recently started using Reflect, moving away from TrueImage. I'm pretty happy with it so far, except for the outlandish price (yea, I know, free version fine for most but I like to password protect my images).
I notice there's an option to put the recovery on the boot menu, reminiscent of Norton Ghost.
View 5 Replies
Oct 26, 2015
Whether partitioning of pen drive is required to keep backup image on Macrium rescue pen drive?
View 6 Replies
Oct 14, 2015
I am in the process of creating an Image of HP Pavillion DVT7 2200 Notebook now. getting some steps to follow to restore it. The Laptop I have Macrium Reflect running on now will have the HD replaced as it on the verge of failing hence why I'm doing doing.
I have physically swapped out the old HD with new HD? I will have Macrium Reflect Image contained on the root of a brand new 1 TB External drive. start at the point of turning the PC on for the first time and if I should have the External drive plugged in before I attempt to boot the laptop for the first time.
View 9 Replies
Dec 18, 2015
I have a bootable windows installation Thumb Drive. Can Macrium make a backup of this thumb drive so in the event of this thumb drive going faulty, I could make another Thumb drive with the backup image.
View 8 Replies
Dec 26, 2015
OK here's my scenario, I have successfully used Macrium Reflect to create images saved on a 1TB external drive. I had 2 good images stored on it and tried to put 3rd image on the same drive. Please note that I have used one of save images to restore the system after replacing the failing hard drive. The create image process runs to what I think to be the very end then comes up with msg: "an error has occurred, Please see the history log for more details"
I could not find this history log, but figured maybe there was not enough space on the 1TB drive to completely write the image file. On my next attempt to create the image, I used a brand new 3TB external drive and it fails the same way. I have attached a photo of the error, where the history file is? I have left laptop up and running after clicking ok, did not want to risk losing the history file by booting back up. BTW, on the 3TB external drive it did create a temp file named xxxxxx.mrimg.temp with size of 0 kb.
View 9 Replies
Nov 29, 2015
I have used an old Brodabund family Tree Maker programme in many Windows versions as they have evolved. I successefully started it running in Win 10 but now I cannot open it. I get a message that tells me that variouse .dll files are missing.
View 1 Replies
Feb 10, 2016
Have 691 GB free on 3 TB drive, backup every night. Trying to save 7 but Macrium won't go beyond 6 no matter what I set it at. Free space requirement is set to 400 GB.
View 4 Replies
Feb 10, 2016
I'm not familiar with the UEFI boot system in W10.
View 6 Replies
Jan 25, 2016
I've just followed Brinks amazing Clean Install W10 without having to upgrade guide and it went flawlessly. I'm now in 10 and have been installing drivers, updates and AV/Malware scans and setup. All done - ready to make a post install image using Macrium (which I have also used before on 7) [URL]...
I have followed all the steps (I believe successfully) and now have a separate SSD (not my OS SSD) with an Active Primary partition of 512mb. Ive copied the ISO which macrium created for the Rescue disc to it etc.
I then tried to get into the boot menu he shows in the guide and that's where Ive come unstuck. How to boot from this rescue disc on my other SSD. I'm not even sure copying the ISO to it makes it a rescue environment I can boot from.
View 9 Replies
Jul 29, 2015
So I decided to upgrade to Windows 10.After 2 years my PC dies or I decide to get a new one. How will I install the Windows 10? Is there a way to backup the Windows 10 files to a disc (only windows files) so I would have my Windows 10 copy ready for fresh install?Or in that case I will need to live with my Windows 8.1?
View 8 Replies
Aug 17, 2015
I recently and I might say reluctantly, upgraded to Windows 10. The upgrade went fine, however I'm not able to create a backup of the system image or folder files. I have a 320 GB WD Blue drive for the backup. There was always more than enough space to do this under Windows 7. After failing a number of times I deleted the drive completely and re formatted it. I now have no backup.
View 1 Replies
Aug 17, 2015
I am a noob when it comes to backup and restore. After many years and many iterations of Windows, I finally tried to backup my files and folders. They have been stored to an external HDD.
I ran into an issue with Win 10 that required a complete clean install of 7 and then upgrade to 10 again. The drive was completely cleaned.
Upon install, I can only see the backup I created after the new install.
From the backup drive, I can see many files when clicking on the drive to view content. The laptop has been renamed. How then can I restore the files from the old setup?
View 9 Replies
Jan 20, 2016
Is there a program that will backup windows 10 files and settings like windows easy transfer that was in windows 7.
View 4 Replies
Jan 25, 2016
My folder is:
MediaID.bin
It has all my documents, photos, etc. from a PC that I converted to Win 10 and gave a family member. But I can't seem to get the file to open on my new Win 10 Pro laptop. Is there a program, command or process that will allow to restore all my files to this laptop?
View 1 Replies
Aug 5, 2015
I have been told that it would be a good idea to "backup" my files before I upgrade from Windows 8.1 to Windows 10. How can I go about doing this?
View 1 Replies
Jan 11, 2016
If I do a fresh install. What are some safe online sites I can back up my files? Drop box or one drive?
View 9 Replies
Apr 6, 2016
My daughter backed up her computer on an external drive. I would like to extract some picture files that she saved on her computer for me several weeks ago, but I do not want the backup file to open up on my own computer. Her computer is being shipped in for repairs.
Is there a way that I can access the files without actually opening up that whole backup file? When I click on the image, it does not give me an option to "view files and folders".
View 4 Replies
Feb 10, 2016
I'm planning on doing fresh install but my internet isn't the best and so I want to backup my bigger Windows Store apps so I don't have to re-download them later (mostly games). Is there some kind of method to get a copy of them and then put them back later?
View 6 Replies
Oct 9, 2015
I have been trying to setup a scheduled backup (Windows 7 Backup and restore) on Windows 10. I want to include a system image of the C: drive as part of the back up and save it to the D: drive. However Windows wont let me save the image on the D: drive, I think because I moved the location of my user files to the D: drive to save space on my SSD.
Any way to override or workaround this without having to move my files back to the C: drive?
View 3 Replies
Aug 4, 2015
I have a Fangbook III made by Cyperpower PC. I am unable to play sound via the on-board speakers for the laptop. I am however able to play sound through the 3.5mm auxiliary jack input. I have speakers set as default device under the playback settings.
This is where is gets strange. Whenever I attempt to delete the Realtek audio driver, whether it is through windows or a 3rd-party driver uninstallation software, Realtek always comes back within a few seconds. Right before it does come back, under playback, it separates speakers and headphones with both having the driver High Definition Audio Device. If I hurry before the Realtek driver comes back the speakers seems to work! But once the Realtek audio speakers comes back, the default speakers and headphones goes away and I continue to have the same problem with the Realtek driver.
I attempted to reformat the computer with windows 10 and erase all drivers but Realtek was already installed. I assume it is required for this specific laptop? How to direct the Reaktek High Definition Audio driver to use the speakers instead of the auxiliary jack?
[URL] ....
View 1 Replies
Jan 7, 2016
How do I backup Windows 10 calendar app?
Can I import Outlook 2016 Calendar appointments and events?
View 3 Replies
