Apps :: Remove Most Metro Apps
Aug 23, 2015
This application will also provide privacy if you choose that. It can remove All of the Apps permanently if you allow it to. I did not and I made a current image of my system before I used this. Below is an image of the Apps that were left:If you decide to use this, please make a backup before doing so. I also would not suggest using it if you are using Insider Builds.
View 2 Replies
Similar Messages:
Sep 1, 2015
I use this PowerShell command to remove all modern metro apps from all user accounts:
Get-AppxPackage -AllUsers | Remove-AppxPackage
However, it does not remove some apps and I have to remove them manually using:
Remove-AppxPackage Microsoft.Office.OneNote_17.6027.10071.0_x64__8wekyb3d8bbwe
So, is there a single command to remove all metro apps at once?
View 2 Replies
Sep 14, 2015
A bit of background info: I have installed Windows 10 about 5 times.
The first 4 it would only work until the first reboot because during the setup phase it would automatically install a faulty driver and on the first available restart my Windows would break and I would have to reinstall to get the laptop working again. However all metro apps worked fine before the first reboot.
The 5th time I switched my internet off and window 10 setup finished without internet. That means the faulty driver didn't automatically get installed so I had a chance to switch off the automatic driver installation. However it also meant Windows 10 didn't get activated during the setup phase. I switched internet on, activated Windows 10. Now my computer works fine but all Metro apps are greyed out and not working. For some of them the application crashes and others give me the error "This app can't open". I tried all obvious solutions
sfc /scannow and the DISM commandReinstalling them using: Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)AppXManifest.xml"}Reinstalling them using PowershellStarting the Application Identity and App Readiness Services and a couple of other random suggestions I saw online. For me nothing has worked. I tried digging deeper and looking at the event logs the error message when trying to open the store is:
Activation of application Microsoft.Getstarted_8wekyb3d8bbwe!App failed with error:
The application cannot be started. Try reinstalling the application to fix the problem. See the Microsoft-Windows-TWinUI/Operational log for additional information.
Looking at the Microsoft-Windows-TWinUI/Operational log:
Activation of the app Microsoft.WindowsStore_8wekyb3d8bbwe!App for the Windows.Launch contract was blocked with error 0x80073CFC because its package is in state: 66.
View 2 Replies
Feb 10, 2016
I have some issues with the metro apps in Win 10. They don't open, and have unusual names. This actually started a couple days ago when my taskbar and start menu wouldn't open. While browsing the web, I saw exact same issue get told to enter a powershell command and he replied saying it fixed it. The command in particular was:
Code:
Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)AppXManifest.xml"}
Long story short, It did anything but fix it, and gave it messed up names. I can click and click, but nothing shows up, even for a split second. I've tried to open an app from the .exe inside System32.
View 3 Replies
Aug 22, 2015
I recently installed Windows 10 Home using the iso. It was fine but after sometime, the start and metro apps had stopped working. I thought that re-install would do the trick. So I reformatted C: and installed Windows 10 again hoping it wouldn't come again. But now after two weeks... the exact same thing happened. Start, Action Center, Settings, Search... not working. Tried the powershell command, didn't work. Also I cannot create a new user because the settings app crashes... Start wouldn't come up at all. Metro Apps like Calculator, Store and all, they just simply crash after showing the splash screen for a second. I can't do another reformat...
View 2 Replies
Nov 24, 2015
I'm not at home with access to Windows 10. Does this still works with Windows 10?
View 5 Replies
Dec 25, 2015
I don't have Metro (Modern) Apps (Fresh Install). How do i get it?
View 3 Replies
Dec 10, 2015
I must be missing something really simple. How do I uninstall a Windows Store app?
View 6 Replies
Dec 16, 2015
When I open my metro apps on windows 10, app like Groove, mail, store, most apps don't start. Can't use most of my metro-apps again after installing updates.
View 1 Replies
Jul 31, 2015
I recently upgraded to Windows 10 and installed my drivers and updates, but I noticed that my mouse click is not working on any metro interface (including Edge). It is working fine in games and other non-metro softwares. I am using Dragon War ELE-G7 mouse.
View 1 Replies
Jul 29, 2015
Ive updated my 8.1 today and now my start menu and indeed any metro apps wont start (ironic).If I create a new user their start menu is ok. I'm trying to revert back to my 8.1 installation but I cant because I cannot get to the revert option as it lives in the metro settings page NOT the standard control panel (why oh why are there two places with differing options, though in this case if it was all metro I couldnt access anything).
I cant revert using the new user as then it tells me I cant revert because I have added a user since upgrading? I cant start anything metro..I cant start anything from the right click start menu..I cant right click in file explorer (which I have to start via win-r) so its hard to get anything running as administrator..its a total fail of an upgrade for me.
View 1 Replies
Aug 22, 2015
Is anyway to edit "all Apps", especially to remove some icons from? I have uninstalled Edge, but the icon is still in Start menu of "all apps".
View 5 Replies
Jul 30, 2015
I am using Windows 10 for around 2 days now. But today my computer freezed while playing a game, so i restarted my computer and when i logged in, the start menu,notification menu and metro apps would not open anymore.
View 9 Replies
May 25, 2015
I know it's not possible to move/install metro apps on sd card in win 8.1 but i want to know if it possible in win 10 insider preview. If yes, do i have to move them manually or can i assign the sd card as default install location.
View 2 Replies
Oct 31, 2015
Recently I have removed all metro or preinstalled applications on windows 10 with a powershell command. It removed all the extra software I needed but, I realized windows store and calculator are missing. I've search up many solutions on the web but, none have workped. Now, i want to know how I can get them back.
View 1 Replies
Sep 26, 2015
I am getting my 3 year old Dell Vostro V131 laptop up and running. I bought Windows 10, installed it and configured everything without too much of a problem - except for this little issue.
Just as the OS installed, the touchpad just allowed me to move the cursor and tap to click - not much of a surprise, as it ran on stock Windows drivers. I got the touchpad drivers for my laptop model from Dell's site (was labeled as a Windows 7, 8 and 8.1 driver, but there was none for 10, so I just used that). The scroll and zoom gestures worked fine in file explorer, MS Office, Skype, Spotify, Chrome, control panel and desktop. However, there is no reaction from Edge, modern/metro apps (like settings, weather) and the start menu!
I'm pretty much stuck right now. Here are the things I tried:
1. Configuring the touchpad in Windows settings - not possible, as the OS doesn't classify my touchpad as a "precision touchpad", and therefore doesn't allow to configure any gestures.
2. Installing a driver from Synaptics' website (obviously with the Dell one uninstalled) - doable, but it doesn't change anything at all; the touchpad is still listed as "PS/2 pointing device" in the device manager, no gestures are available, no driver is listed in "Programs and features", and no icon is to be seen in the app tray.
3. Same as 2, but first uninstalling the generic driver via device manager - not effective, as the driver uninstall requires a restart, and after the restart Windows installs the generic driver back.
What I thought about: This is obviously Microsoft's fault, as only their new, Windows-10-modern-interface-touch-controllable-minimalistic-cool-looking software faces this issue. Could I, by any chance, fool Windows 10 into thinking i have a "precision touchpad"? Registry editing comes to my mind, but I have no clue how to find such an entry if it exists.
View 1 Replies
Nov 14, 2015
I have the following in Notifications
I have uninstalled Screenshot Captor, I have run CCleaner over the Registry, I removed all traces of Screenshot Captor from the registry and I've rebooted - yet the Notification list still has those nine entries in for Screenshot Captor How can I get rid if them ?
I no longer need Screenshot Captor because Win 10's built facilities are adequate, for me at least.
MS have never gotten the system tray/notification area functioning properly since... forever
View 3 Replies
Sep 5, 2015
I have just updated to Win10 and wanted to get my laptop to a more Win7 look. I followed a tutorial on how to remove the 'app tiles from the start menu.....(right click -> unpin) but the apps don't remove. I have tried restarting the laptop and then the apps were removed but other apps have appeared.
View 4 Replies
Dec 11, 2015
I wish to remove from "All Apps" some Programs. I do not wish to uninstall them, but just to remove them from that list.
I found that I can add here X:UsersUsernameAppDataRoamingMicrosoftWindowsStart Menu things to autostart, but thats mostly it.
As example, i wish to remove "Steam" folder and Link in the "All Apps" .... but I cannot find anything how to do, besides of a uninstall
Same goes for lots of other stuff I get from Windows as default added... Cortana, Groove-Music, Mail, Contacts, Xbox and what not. I am simply not using all that stuff and it just bothers me that i have to scroll everytime so long to get where i want.
Is there a way, an Program or something that I can hide/remove here all unwanted Links to stuff I do not use at all?
In Win7 I had such a neat and completely clean Startmenu. This Tiles are nice, but I want to have everything clean and the way I want it, and not how the OS is forcing me to have. Like Accesoire... that Point in Win7 really came down to the Stuff i am SOMETIMES using, everything else was removed. IF i need something, i can check where to find that Application via Explorer.... and well, that never happened till now
What Application I can use for a cleanup?
View 6 Replies
Aug 31, 2015
Just open Windows Power Shell and run it as an Admin then enter one or all of the entries below except the last one:
Code:
Get-AppxPackage *3dbuilder* | Remove-AppxPackageGet-AppxPackage *windowsalarms* | Remove-AppxPackageGet-AppxPackage *windowscalculator* | Remove-AppxPackageGet-AppxPackage *windowscommunicationsapps* | Remove-AppxPackageGet-AppxPackage *windowscamera* | Remove-AppxPackageGet-AppxPackage *officehub* | Remove-AppxPackageGet-AppxPackage *skypeapp*
[Code].....
You can do one at a time or pick the one you want to remover or all at once.
Make a Restore Point First.
attached is a rar of the document
remove apps.rar
View 2 Replies
Jul 31, 2015
I have my Windows 10 for around 3 days now, the thing is, in the second day after my computer froze when i was playing counter strike, everything in the task bar but my shortcuts stopped working, they dont open anymore, but when i click it, the cursor blue loading circle shows up but nothing happens.
View 1 Replies
Sep 1, 2015
Install_wim_tweak I found some info on the net, commands how to remove windows apps etc. But I do not know how to start using that app as there's not much on the net. I got Install_wim_tweak for framework 4.6 and planning to use it to remove some packages from current os then from win iso, windows 10.When I open Install_wim_tweak cmd starts and app ask me for install.wim path, what should I put in there? When I type install. Wim path on mounted iso, cmd closes immediately. When I type install_wim_tweak.exe /? Cmd closes
View 1 Replies
Aug 2, 2015
I have about Windows 10. Back on Windows 7, under the all programs list I was able to delete anything I didn't want listed there. Unfortunately with Windows 10 I can't remove everything. So I am wondering how can I clean up the "All Apps" list under the start menu?
For example, I want to remove "Calculator", "Calendar" and "Camera" from all apps. When I right click on these items I can only either pin to start bar or task bar.
Is there any way to remove these items so the All apps is a little bit cleaner?
View 6 Replies
Sep 16, 2015
I have passed from Windows 7 to Windows 10. I remember that on the windows 7 i could drag and drop in the start menu
all the programs i use mostly and in the mean time i could sorted the alphabetically.
I would like to have the same on Windows 10 but i cannot sort it out. How you can see in the attached picture,the list is always empty:
View 3 Replies
Feb 10, 2016
I have windows 10 and use IE11 / Google. Each time I hover my mouse over an image I get a Pin it message in red, I can't find anything on Google to remove this annoying feature.
I have gone on to their website and disables the feature but it does nothing.
View 1 Replies
Aug 20, 2015
I came from Windows 7 like yesterday and upgraded to Windows 10 last night. I absolutely hate the All Apps menu, and don't see a way to change it much.
Is there a way to simply remove the Alphabet letters from the All apps menu? I don't really need my apps categorized by letter, just sorted.
View 7 Replies