Apps :: Windows Powershell - Detect Docking Stations And Attached Monitors
Feb 10, 2016
I am trying to write a script to detect all docking stations and monitors attached to those docking station for Lenovo Thinkpad t540p laptops on a domain network. Most of the monitors are Asus. Is this even possible? Running powershell from DEV WIN 10
View 2 Replies
Similar Messages:
Dec 30, 2015
I've encounter that all of my windows 10 apps cannot launch. I click them in the start menu but without response. I've executed powershell command
Code:
Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)AppXManifest.xml"}
View 9 Replies
Sep 7, 2015
I'll try to summarize it in bullet points:
* I was having problems with the calendar app, hence I tried removing it
* I stumbled upon PowerShell and removed the app (along with mail)
* I can't open Windows store afterwards
* I tried following some restore fixes online, but to no avail
* I downgraded to Windows 8.1 in hopes to undo my mistake
* After reverting to 8.1, the calendar, mail, people, viber, and fresh paint app don't function anymore.
* I am re-downloading Windows 10 to see if it could miraculously make things right again
* If it does not change, my last resort would be to reset my PC. Hence the title of this post
View 2 Replies
Oct 6, 2015
Looking for a way to use powershell to remove every modern/metro app except those specified in a list.
I assume you'd have to use get-appxpackage to list all apps installed, then select ones that aren't in the list.
(The list would just include what's included by Windows by default).
The purpose is for removal of OEM installed apps from new laptops.
View 1 Replies
Jun 17, 2015
Many of the Universal Apps cannot be uninstalled because the button is inactive (grayed out). This might be 'by design' for the Technical Preview since Microsoft wants users to test the Apps.
The preferred method is to use the uninstall button when it is active. The list below provides a way to uninstall an App when the button is NOT active.
Launch an elevated PowerShell (Right click - Run as Administrator ...)
Copy the command for the App you want to remove from the list below and paste it into the PowerShell window
Example:
To remove the Calculator App, copy the entire line under the App name
Calculator
Remove-AppxPackage -Confirm -Package Microsoft.WindowsCalculator_10.1505.29000.0_x64__8wekyb3d8bbwe
The -Confirm parameter lets you to decide if you want to remove the App [ Yes ] or cancel the operation [ No ]
Code:
Alarms
Remove-AppxPackage -Confirm -Package Microsoft.WindowsAlarms_10.1505.12000.0_x64__8wekyb3d8bbwe
Calculator
Remove-AppxPackage -Confirm -Package Microsoft.WindowsCalculator_10.1505.29000.0_x64__8wekyb3d8bbwe
Camera
Remove-AppxPackage -Confirm -Package Microsoft.WindowsCamera_5.31.1.0_x64__8wekyb3d8bbwe
[Code] .....
View 3 Replies
Feb 10, 2016
In the past I have had to go around to each computer and set the default programs. Is there a way to create a batch file to set default programs silently for each user that signs on? Like we would like to have Adobe Reader DC, Internet Explorer, and VLC player be the default programs.
View 2 Replies
Sep 3, 2015
I would like to automatize cleaning the Windows 10's start menu from all these default pinned apps that I'm not using. I don't want to remove apps, only unpin from from start.
I tried to google, but didn't find any. There seems to be no command to pin and unpin apps in start menu. Any alternative methods? The information about the configuration of start menu must be stored somewhere....
View 2 Replies
Apr 25, 2015
Instead of doing an upgrade of Windows in place, I am trying to do a install from the ISO using EasyBCD.The ISO launches fine as the setup starts but Windows refuses to see my HDD.I have an Elitebook 9470 laptop.
It uses the Intel storage drivers for AHCI and the HDD itself (Intel SSD)Bios is set to use UEFI Hybrid (With CSM).
BIOS can not use UEFI (without CSM) mode as the system does not boot.Tested using Legacy mode and still unable to see HDD. BIOS version is F60 (Jan 2015) and is the latest.
View 4 Replies
Oct 16, 2015
When I go to a web sit, windows can't open it. when I run troubleshoot I get the message : windows can't detect networks proxy settings. I only have this problem since I downloaded windows 10.
View 1 Replies
Jul 29, 2015
After upgrading my surface PRO to windows 10 today it doesn't seem to be able to connect to the network. Going in to setup a connection windows displays the error "windows did not detect any networking hardware". I enabled, disabled, re-enabled, and re-installed the network adapter but it didn't seem to work.
View 16 Replies
Oct 13, 2015
Currently we run 5 workstations on win7/8 on old hardware. In the near future, we want to migrate to windows 10 - and use the free upgrade offer from ms.Problem is, we'll get new hardware for all workstations. So the plan is, to build the new hardware. install win7/8 on every new hardware and use the free upgrade on the new hardware. After that, a new clean-install will be made.the clue is, besides the OS it'll take very much time to install all 3rd party software on the machines.To skip this work, we would like to duplicate the harddisk after the setup of the whole system is done. This should be possible from driver-side, because the hardware will be identical.
But now comes the win10 licence question :-) I know win10 will recognice the hardware and validate the licence due to the win7 upgrade. but what will happen if i switch the harddisk to the new system?or i can try to keep the system unlicenced (no network connection. Best way?) until i mirror the harddisk. There is no internet to update the other parts of the system ...
View 9 Replies
Nov 6, 2015
I'm running Windows 10 Professional, and have a triple monitor setup. I have two 22" Dell monitors side by side, and I have my 55" Vizio TV mounted on the wall above my monitors. The Dell monitors are connected to my video card via VGA/DVI connections, and the TV is connected via HDMI.
Well, the annoying problem I'm having is that Windows 10 will randomly move my opened windows between monitors, but only when I'm not using the computer. For example, the Dell monitor on the right is my "main" display, where I usually keep my windows open (Chrome, uTorrent, etc.). If I turn off my monitor, later when I come back, I'll find the windows I left open on my left monitor, so I end up having to drag them back over. Another example is when I used Plex Home Theater. I run that program on my Vizio TV at all times. But if I don't close the program before I turn the TV off, it ends up getting moved to my Dell monitor on the left. Also, when I have my TV turned off, and I turn it on, it blacks out both of my Dell monitors for maybe 5 seconds, and during that time it moves whatever windows I had open on my right Dell monitor over to the left one.
I had Windows 8 and Windows 7 on this PC previously, and I never had any of these issues. I have the most current video drivers installed
View 3 Replies
Aug 15, 2015
I have two monitors. One uses dual DVI cable and one uses DisplayPort. When the monitors wake up after a sleep, the apps on the DVI monitor move to the DisplayPort monitor. This probably has to do with the difference when Windows senses which monitor is active first.
Is there a way to stop the apps from moving? Is there a tool which restores the apps positions after a wake up?
View 2 Replies
Jan 27, 2016
In my home theatre I have a Win 10 Pro PC , set up for Extended Display set up for:
- a large 4k TV (the default), with high res settings (Monitor 2)
- a small legacy 17" display, low-res settings (Monitor 1)
The large screen is the default screen, as that's what I need to be displayed when watching media, and controlling things via a wireless keyboard on the couch.
The purpose of the small display is simply so that I don't have to have to keep the large display on when:
-doing minor config/setup work
-listening to music via iTunes
-viewing the 'current' song being played on my digital cable box
-etc
It's more or less working well, but THE ISSUE IS THIS:
When working when both displays are on, and the active window in on the large display, I can select it and drag it over to the small display to work with. But when the large display is powered off, I am blind ; all I see is the task bar and whatever I launch goes , of course, goes to the default display.
-Is there any tool or utility I can use to virtually see the open window on the active monitor and so I can drag it over?
-Is there any tool or utility , like TeamViewer has, where there is a top level menu "Next Monitor" to manage the screens.
Ironically, when I do use Team Viewer from another room, its perfect as I can flip between monitors at will (as I am starting on the 'default' screen). But when I am in front the physical machine, in front of the small monitor, I dont have that option.
What I kinda need is the multiple monitor option of Duplicated displays, but that does not work because of the different resolutions.
I can use Show Desktop Only on 1, as I cant get there ( ie a right click will always show up on the large screen only as is the default.
I need to power up the large display, drag the window (eg iTunes) to the smaller display, and then turn off the large TV.
View 6 Replies
Dec 2, 2015
Is there a way to get rid of the feature that means that i have to move my mouse quite drastically to get a window from one screen to the next?
With windows 10 they have given us the ability to snap a window to a side, that's great but when i want to move it to the other screen, its gets irritating, how do i get around this? I just want to disable the snapping of windows when my mouse goes near the middle of my two monitors, it was good on windows 7. I hope i have explained this correctly, its quite difficult mind.
View 2 Replies
Jan 22, 2016
I have bought Gold Touch HDDS-U3 docking station, I plugged both usb cables to the computer (one to SSUsb port and one to regular port), waiting for 30 minutes while it was turn off (for battery charging). After that I insert a 3.5' HDD and turn it on. Nothing happen. there is no red or green light and the device doesn't appear in Disks Management.
View 1 Replies
Jan 21, 2016
I am using a Sharkoon Quickport DUO Docking station, in which you can mount barebone hard drives.The problem is, that when I try to transfer files from an external hard drive to - for example - my internal hard drives, I get the following error after a few seconds, and the transfer stops:
View 1 Replies
Feb 10, 2016
My computer can read .pdf files, and opens .doc files with something called craftydoc... But it fails to read a .txt
View 1 Replies
Jan 22, 2016
How can I open attached files when using Office pro 7.
View 2 Replies
Oct 16, 2015
Running powershell as Administrator or running the ISE as Administrator (which shows Admin at top of one of the two images) isn't returning what I am expecting for looking at tasks scheduled. What's up with the output in the images? I was running Windows 7 Home Premium and updated to Windows 10 end of July/early August. I have another thread on an issue that I haven't been able to resolve and was hoping maybe using Powershell would locate that issue (monitor turning on by itself after physically being turned off via power button at ~3am daily (probably 2:5x timeframe but it happens daily).
View 8 Replies
Sep 17, 2015
I scroll in my powershell using either sihft + arrow keys of pgup and pgdown. How can I disable the scrollbar ? I don't need it.
View 1 Replies
Jan 21, 2016
In Windows XP, when I print a doc from my PDF viewer, I can select my network attached printer's FAX machine and send a fax. In Windows 10, when I print I have a print destination of 'Fax' which puts me into the Windows 10 Fax code which tells me that I don't have a fax machine set up and then we go downhill into total irrelevancy.
View 5 Replies
Oct 2, 2015
printer attached to mac mini. have bonjour on pc with win 10. when i open the bonjour printer wizard it says "no bonjour printers are available. all 3 are networked together on a home network (WORKGROUP) i can share files from the mac but can't print from the win 10 pc
View 9 Replies
Sep 23, 2015
Inserted my new SSD to a SATA3 port and, next to my HDD 1TB, and went for a clean install right away. The system installed without problems (wiht the old HDD still attached), then i booted up the system (was a bit weird, because two versions were showing, however i formatted the old windows partition) and installed my programs. I saw that a 110 MB of data were still sitting on my old partition where the Windows 10 was earlier. Tried to delete those files but could not. However I shut down my pc and wanted to boot up again. Then it showed me a screen with "select proper boot device or restart computer". I went to BIOS to see if my SSD was set to primary boot device, but it was. But when i manaully select the boot device, my SSD, after starting up the computer, it boots into Windows and is running normally.
Can it be that there is no boot partition on my SSD and it wants to use the boot files from the HDD?? I also tried to unplug the HDD and boot up, but the same massage was showing up. But when i select the boot device manually it works.
View 3 Replies
Jan 10, 2016
I have recently purchased a new 4k television and sometimes plug my laptop via an HDMI cable to it for gaming. When I connect, the desktop is zoomed in and some games do not run because of this.. Now I had this issue with a standard 1080p TV, it was a simple fix of adjusting the Change the size of text ,apps and other items slide bar under settings/system/display. Games would start working and thedesktop would resume its normal size. But with this 4k TV, the Change of size of text bar and not selectable along with a number of other options, like resolution (I have to do this via the Intel Graphics Control Panel. Some games do not like working whilst the desktop is set to zoom
View 1 Replies
Jan 6, 2016
So my mail app was not opening links. So I looked up how to reinstall the mail app. Got to this: [URL]....
I uninstalled the apps, then ran the powershell command: Get-AppxPackage -AllUsers| Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)AppXManifest.xml"} to reinstall the mail app.
A bunch of red errors appeared in the prompt and now my start menu, notifications, onedrive,... won't work.
View 1 Replies