Apps :: ITunes Fails To Install?
Aug 4, 2015
I am trying to install iTunes 12.2.1 on Windows 10 Pro. During installation I get two errors, I believe they are connected. I am running this as Administrator from a User account. I have also tried running it with Windows 7 compatibility checked, same result.
This is the first error:
The installation continues for a little bit, then it throws this error:
At this point the installation fails.
My brother is in an identical situation; both of us have identical machines, upgraded from Windows 7 (where iTunes worked) to Windows 10, did a system refresh, and encountered this problem. Installing either version 11 or 10.7 do not throw either of these errors, however upon launch, it said it was not installed properly and would need to be reinstalled.
View 1 Replies
Similar Messages:
Sep 5, 2015
New Dell laptop and everything else works. Have deleted and re-downloaded iTunes 2x. Made sure it's enable in Windows firwall. Even turned off firewall. Deleted McAffee totally. No proxy server is checked. I've googled all day and it seems others are having this problem but I can't find a solution. I'm convinced it's some setting somewhere but I've tried/googled everything. The iTunes diagnostic says iTunes is NOT enabled in firewall, but it is. It will say it's not enabled even if I turn off the firewall off.
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Dell Inc. Inspiron 5558
iTunes 12.2.2.25
QuickTime not available
FairPlay 2.8.30
[Code].....
View 6 Replies
Sep 29, 2015
Before I do a clean install of Windows 10, I would like to know how to back up any music which isn't covered by my iTunes Match subscription. I know that I shall be able to bring in most of my music and I have backed up the ring tones which I have created to a thumb drive. I am really concerned about the CDs I have added to iTunes but have since given away.
View 4 Replies
Oct 7, 2015
How do I transfer iphone music that is in itunes to window pc itunes ? this include purchased and non-purchased from itunes.
View 2 Replies
Aug 1, 2015
Since I've upgraded to Windows 10, iTunes keeps loading on startup. I looked in the task manager under Startup, and disabled iTunesHelper. I don't see any other apps listed under Startup that are associated with iTunes or any other apple software.
Am I missing something? It's a little annoying having iTunes loading on startup.
View 9 Replies
Jul 19, 2015
I am using Windows 10240 and I have the latest iTunes 12.2.1 installed. I have it pinned to my taskbar but when I open it it creates a second icon for iTunes on the taskbar. I have tried unpinning and repinning both icons several times but that doesn't work. It always creates a second icon when it opens.
View 4 Replies
Sep 15, 2015
If I pin iTunes shortcut to task bar and then launch iTunes, it shows two iTunes icons in task bar. How do I go about fixing this?
View 2 Replies
Dec 7, 2015
Back when I got Windows 10 I started having this problem with iTunes that I didn't have before with 7. When I go to close iTunes it freezes and then this message pops up, "One or more applications are using the iTunes scripting interface. Are you sure you want to quit? If you do nothing, all applications that are using the scripting interface will be automatically disconnected in (20 second countdown)" My options are Quit and Don't Quit.
When I hit quit, or let the countdown run out, it closes iTunes and everything is fine... for about 20 seconds, because iTunes suddenly re-opens by itself. Are there some new Windows 10 apps that are talking to iTunes even when it's off and they make it open again? This is really annoying because iTunes is always connecting to the iTunes store and causing lag spikes while I'm gaming. If
Here are pictures of all of the software I have installed.
View 1 Replies
Aug 6, 2015
One of the casualties of my upgrade to Win 10 Home was my iTunes library. Basically, iTunes could no longer find my music, even though it hadn't moved. To cut a long story short, I ended up creating a new library and all was well - or so I thought. Since then, however, every time I boot my PC, iTunes loads at startup, and the curious thing is that there is no reference to the programme in any of the startup folders, nor in Task Managers Start Up list. I also use CCleaner, and that also shows that nothing apple related should be running at startup.
Clearly something is causing iTunes to run? I should add, there are no iPods connected to the PC, and iTunes helper is also disabled via CCleaner.
View 9 Replies
Oct 9, 2015
I am missing the icons for a few pieces of software, such as office, i have tried resetting the icon cache, to no avail
View 5 Replies
Oct 20, 2015
I've notice iTunes does not run if my PC has been left on for a few days. If you click it then it runs as a process but has no window, no message, no anything.
If I reboot the PC then it runs right away.
View 4 Replies
Oct 2, 2015
I am trying to prevent iTunes from starting automatically when I login to my Windows 10 machine. I have checked startup folder and there is nothing in there. I am not sure where in the iTunes app preferences to control the app behavior.
View 3 Replies
Jul 16, 2015
For some reason; itunes keeps giving me the message "itunes can not sync your phone because you do not have enough access privileges" or something to that extent. And the odd thing is for some reason it just started happening today. The syncing had been working fine up until today.
View 6 Replies
Aug 26, 2015
I have the latest version of iTunes pinned to my taskbar and whenever I open iTunes, it creates a new icon next to it.
I have had this problem recently on Windows 7, however I fixed it by pinning the 'open' iTunes icon to the taskbar and unpinning the 'closed' one. I updated to Windows 10 and this was not an issue. HOWEVER, now I've purchased a new computer and the problem is persisting BUT this time on my new computer, it doesn't give me the option to pin the 'open' icon. So in other words, if I pin/unpin one of the open OR closed icons, the command will happen to both icons.
View 6 Replies
Dec 14, 2015
When I attempted to start up a new laptop to install genuine Windows 10, (downloaded from Microsoft website), via USB I received the error message,
"Your PC ran into a problem and needs to restart. We'll restart for you".
Error message also said ... "Attempted write to read only memory (WimFsf.sys)".
The laptop attempted to start several times but the same message was seen.
The new laptop is an ASUS X554LJ-XX025D, free dos.
View 9 Replies
Dec 5, 2015
I have a HP desktop with W-7 that the HD is failing. (Almost failed)
I can't do a clone or a system image.
I installed a new HD and booted from my latest USB Upgrade from the Windows Media Creation tool.
I skipped the activation as it installed.
Now when I use the original product key, it fails to activate.
View 8 Replies
Dec 3, 2015
All Windows Store apps that I have fail when they are automatically updated. Here's what I just got in my event log.
Event ID 20 - Installation Failure: Windows failed to install the following update with error 0x80070002: OneNote.
When I go into the Store and look at the update it shows the update as having had a problem. I can click on the spinner icon which downloads and installs the app so all is not lost.
I don't have any other problems with Windows Update. Other than Store apps they all automatically install just fine. I've seen lots of various solutions for WU problems but I haven't found one specifically for Windows Store updates. I'm hesitant to try one of these solutions since WU works fine except for Store apps as I mentioned.
View 2 Replies
Jul 1, 2015
I have recently been trying to update an old hp laptop running windows 7. The 10130 update is showing ready to download, it downloads and tried to install but repeatedly fails at around 70-80% each time. It gives an error code of 800703f1 each time.
I have tried disabling all security features and firewalls etc. The laptop will not let me restore or reset to factory settings. I am not able to download the bios file as i have no flash drive to put it onto.
View 1 Replies
Aug 13, 2015
I'm a student and my university has a subscription to Dreamspark, so I got a Win10 key, along with an ISO-file from there. I'm using a Lenovo G700 and trying to perform a clean install from a bootable USB-stick.
I have tried creating this USB-stick with the "Win7 USB DVD Download Tool", using different guides from the internet with NTFS and Fat32 filesystem, launching the setup normally and through UEFI, using the "Media Creation Tool" ([URL]) to create the USB-stick directly and downloading the ISO file first and creating a bootable USB-stick from that with all the methods above, but no matter which of these methods I use, I get the following error during installation:
"A media driver your computer needs is missing." (URL)
Unfortunatley, I am currently running Win7 Pro x64 on my laptop and the following page says, that the upgrade to Win10 only works from Win8.1, not Win7: [URL]
When I try to use the "Media Creation Tool" to instantly perform an upgrade, I get the following error:
"Something happened... 0x80070422 - 0x90016"
What drivers could the installation possibly be missing? I don't have any external devices plugged in, except for the bootable USB-stick, of course. I tried downloading all drivers for Win7 x64 and Win10 x64 from the Lenovo page ([URL])
View 1 Replies
Sep 11, 2015
I can get Steam to launch, but only after having the PC be in sleep mode. I can't get Steam to start with Windows 10 either. I've uninstalled, reinstalled, deleted the blob files and various other things several times. No clue what the issue is.
View 7 Replies
Jul 30, 2015
On Windows 8. 1, I had no issues with this speaker. It's a JBL Charge. After upgrading to 10 it worked fine until a reboot when it failed to connect (it pairs, but won't connect, and the speaker doesn't appear as an audio-out option in Sound settings).
The Bluetooth wizard in PC Settings says "Driver error" next to the speaker icon.
Poking around in device manager, I see this error:
"This device cannot start. (Code 10)
{Conflicting Address Range}
The specified address range conflicts with the address space."
The only references I find to this error online are for different (and quite old) version of windows, and seem unrelated to Bluetooth.
I can't even look at the "resources" tab because it appears to have vanished in Windows 10!
View 3 Replies
Sep 12, 2015
I cannot install anything from Windows Store. It will down load normally & then fail with error 80073DOA. Updates to Apps also fail to install with the same error. I have run wreset ( several times) but still no joy. Date & Time Zone are correct.
Windows Firewall must be enabled to allow the Store to Update & Install!
Found this by accident. I was running the Firewall that came with Norton Security. Why this is a requirement I don't know. Disabling the Norton Firewall was easy but there was no option to turn the windows Firewall back on as Norton had taken over so I went into Services & did it from there. All working fine now ))
View 7 Replies
Aug 10, 2015
Any apps I try and update attempt to install, but stay at 0.0mb downloaded, then it stops and produces this error: The happens with every app.
I read on some other forums on why this may be happening and someone suggested that it was because I had changed the permissions to the WindowsApps (C:Program FilesWindowsApps) folder so that I could view the files within it. Yes, I did try and change the permissions so I could edit the files within (I couldn't), just for fun and to see if it'd make any differences, so that is what I assume the problem is.
After learning this I tried to reset the permissions, how to, so I tried to replicate the permissions from a clean unaltered WindowsApps folder and it didn't work, no matter what I did. Windows Update doesn't even seem to fix it either.
So is there any way other than reinstalling windows to get the App Store working again?
View 1 Replies
Feb 4, 2016
I have and iPhone and I have lots of albums downloaded to my Windows 10 running PC. As far as I can tell, the only way to transfer music from my PC to my iPhone is through iTunes. Now I am not going to be upset if there this is the only way and I'll just have to only listen to this music on my computer, but I wanted to ask if downloading iTunes on Windows 10 is a good idea, and if it will mess with my music (mainly MP3s) and my music player (Foobar2000).
View 4 Replies
Aug 11, 2015
How to keep iTunes from starting upon login. Task Manager and CCleaner both don't have any info on it.
View 9 Replies
Jan 26, 2016
This error message appears: Cannot create the directory 'C:Program FilesiTunes'. A file with this name already exists. Please rename or remove the file and click retry, or click Cancel to exit.
I can't find this directory using File Explorer. I have uninstalled all Apple components and done an iTunes re-install but the same message appears.
View 3 Replies
