I have a PC with Asus Z97-Pro mb. OS (W10) is on SSD. Two SATA HDD's (each 1 TB) contain dissimilar data. Can I add a third SATA drive (1TB) and create a RAID-1 configuration with only one of the two existing drives? The mb manual says that when SATA ports are set to RAID mode, all SATA ports run at RAID mode together. Does this mean that I cannot do what I am asking?
View 1 Replies
So at first, I was trying to resolve an issue with my BD-ROM drive described here: XPS 8700 - BD-ROM (HL-DT-ST DVDRW/BDROM CH20N) Not Recognized Windows 10 - Disk Drives (HDD, CD/DVD, Blu-ray) Forum - Disk Drives - Dell Community
However, when attempting to try different things, I am now in a position where I can no longer boot to Windows 10. More specifically, when I turn on my computer, I get an error saying no bootable drives found and it just lists my SATA 1, 2, 3, etc. drives with an option to restart or go to BIOS setup. In other words, I don't even see Windows anymore existing.
My basic computer specs:
Dell XPS 8700 SE
Intel Core i7-4700
Windows 10 with 1511 update
2TB hdd with 32GB mSATA SSD cache drive
16GB RAM
BD-ROM
I need to get Windows working again, and hopefully, get back my data. Here's what I did to cause the problems:
1) I went to Dell UEFI BIOS setup, and changed the SATA mode from "RAID" to "AHCI". Saved and exited BIOS.
2) After rebooting, Windows failed to load, had a consistent blue screen with the sad smiley face with error "IO1_INITIALIZATION_FAILED", automatic repair also failed.
3) I tried reverting back to "RAID" in SATA mode in BIOS, but it failed to change anything. Windows still wouldn't boot
4) I then entered into the special BIOS menu showing devices which listed my mSATA cache drive and hard drive and RAID settings. Since it showed that the cache drive was "Disabled", I thought I could fix my issues by re-creating the RAID array.
5) I tried to delete the current RAID setup shown in that BIOS menu, then chose the option to recreate the RAID0 array by selecting the option to create a "Striped Disk Array".
6) Once I did the above, Windows itself disappeared, and trying to undo the RAID0 option did not fix anything
So now I am no longer seeing Windows, not sure if my data on the hard drive still exists, and my cache drive (obviously) is not working.
doing a clean reinstall and losing all my previous data in Windows?
I am finding the correct driver for my SATA RAID controller which is operating two mirrored 2TB hard drives. The computer still recognizes the controller being installed at the BIOS level. But currently Windows doesn't see the controller card or hard drives.
Information on the card is; Sil 3124 PCI/PCI-X to 4 port SATA300
System information is: AMD 64x2 Dual Core 5800+ 3.00GHZ with 6GB RAM operating Windows 10 Pro.
When I built my PC I only got a 250gb ssd, figuring that it would be enough for the time being. I have been having issues with what to keep and what to get rid of on there.Is there a way to convert my (C drive to raid 0 keeping everything installed or will I have to format and reinstall everything. Also, could I do the same with my 1Tb secondary drive so I won't have to re-download everything as I have a slow internet connection.
View 1 RepliesThe other day, I tried to do a factory reset on my laptop, but it failed, and I could only click cancel. Now, when I booted up my computer, it goes to the ASUS logo, then a black screen, still backlit, with an underscore flashing in the upper left corner of the screen. I can access the BIOS, and have been trying to do boot overrides. I don't have the ASUS Recovery partition installed on the laptop, and I don't have any possible ways to install an ISO. T
View 2 RepliesWhen I download my free version of Windows 10, I want to install it to my 128gb SATA drive which is now labeled Drive S, and keep my current installation of Win 7 Ultimate on drive C in case I want to revert back to Win 7.
How do I install Win 10 on my SATA drive, change it to become the bootable drive, and retain Win 7 on drive C? Also, if I decide to revert back to Win 7, what process do I go through to revert back to the old Drive C?
Okay. I have been doing a lot of cloning and migrating an OS before but I haven't done cloning or migrating an OS from dual drives in RAID 0 mode.
It's not my PC. Is it a different approach or is it just like working on a single drive? Can Macrium handle this?
Btw, I know clean install is the best way to go, but I was told by the PC owner that she can't afford to install all her programs back due to time issues, etc.
I have an ssd and I want to get another to configure it in raid zero for faster pc but I have already installed windows 10 on one, is there a way I can configure it in raid zero without having to reinstall windows?
View 5 RepliesI bought two new SSDs to be used in a RAID 0 configuration with a Dell 9020 under Windows 10.
Before the drives I arrived I configured two old HDDs in RAID 0 and installed Windows 10 as a clean install. This worked perfectly.
Once the new SSDs arrived I configured these in RAID 0 and started a clean install. Windows correctly identified the disk with the correct capacity and the install completed without issue.
When the computer restarts I got a "A disk read error occurred" error.
If I boot from the installation media to a command prompt I can see that the Windows files have been correctly installed to the C drive of the RAID 0 array.
I also tried loading the RAID drive during Windows install but this made no difference, and if it was the driver causing the issue it would not have worked with my old HDDs.
If I open diskpart I see that the drive is not marked as boot, which it is when I check these details on the old HDDs in RAID0.
I currently have Windows 10 installed on a Raid 0 of Two Samsung 840 Evo's. Because of a change in the way I am using the PC I need to disable the raid and leave them as separate drives.
The reason I am concerned is that windows 10 is bound to your Hardware, not you. So for me to reinstall windows after disabling raid would I need a new copy or would just installing windows 10 again work?
Alternately if I was to re-install windows 8.1 on my machine after disabling raid. Would I then be able to do the upgrade again and get windows 10 that way?
I recently had my PlayStation 3 system corrupt, and I had two options, to delete all of my data and start new, or go trough a long process to restore my data.
To restore my data, I need to change my computer to the SATA Controller mode IDE, but I can not find it in the system BIOS. The closet thing I can find is switching between AHCI and ATA, but I need IDE mode.
Where can I find the setting to change it?
Since upgrading my SATA DVD/CD RW will not work. I insert a disk the light come on showing it is reading and than the drive opens and the pop up box appears stating "Insert Disk" . So I cannot install any of my software. I have read that a lot of people are having the same problem.
I went into Device Manager and it show this device is working, the drivers show 2006. The Drive is TSST corp CDDCDW SH-203N. I am Dual booting and at least get some work done on the tried and true Win 7 Ult.
I just spent a long time trying to find the best answer for this and wanted to save people some time... this is specifically for Windows 10.(So, the answer is basically here: URL...Add a new "Multi String Value" called "TreatAsInternalPort" to HKEY_LOCAL_ MACHINE SYSTEM Current Control SetService sstorahciParametersDevice with the values "0|1|2|3|4|5|" (the | symbolizes a new line)(I had to reboot two (2) times before the changes took.)
I had to do this fix because BitLocker has different options specifically for fixed, local, internal drives as opposed to a USB drive or eSATA drive which is removable. Also, this gets rid of the "Eject" option in Windows 10 for mislabeled internal HDDs.This is what it looks like when storing the values into "TreatAsInternalPort":
I am building a new PC with no internal storage. I am installing a 2.5" SATA dock in one 3.5" bay and one 3.5" SATA dock in a second 5.25" bay.
My intention is to have one SSD for my work PC on Windows 10, one SSD for my son for his gaming on Windows 7 (some of his games are not Win 10 compatible yet), and perhaps a third SSD for playing around with Linux installs, etc.
The 3.5" dock will have a 1TB HDD for backup.
From what I have read, since these drives will not technically be external. (plugged into the SATA on the mainboard through the dock, and not via USB or e-sata.), that their creation and use could be problematic if I use the UEFI boot system, or secure boot for that matter.
So.... I am looking for a methodology which I should use to setup these boot SSDs which will give me the least problems and management issues.
A side related question. I have a boot SSD with Win 7 home premium that is eligible for Win 10 upgrade. It currently resides in my Dell Alienware x-51 R1 system, but I want to move it to the new system as the drive my son will be using.
Will there be any issues in moving the drive to a new system architecture?If/when he can upgrade to Win 10, will there be any issues with that since the architecture has changed from the system of origin?Do I need to backup/reformat/restore the drive in order to get it to boot properly in the above mentioned docking bay system?Since only one drive could be used at any one time. In your opinion, do you think I need multiple Windows Licenses?
I just wanted to ask if it was bad that i had my HDD connected to a eSATA (Asmedia) port when installing my OS? I just tried switching the port from the eSATA ports to the regular SATA ports but it gives me BSOD saying "Inaccesible_Boot_Device". So i just plugged them back in eSATA ports.
View 1 RepliesSo I know very little about raid configurations and how to set them up. I have just finished building my pc and everything is working great, however what about the raid configuration my 500gb ssd and 1 tb hdd have been set up in.
I am therefore wondering a) how to find how my storage has been set up, b) which raid configuration to go for and c) how to set it up.
I was thinking of having the ssd and hdd already installed acting as two different drives. i have put windows 10 and all the programmes on to the ssd and would like the hdd to be seen as if it were a usb stick (I think that is what it is at the moment as under this pc the ssd and hdd show as different drives). Then have those two drives mirrored to a single 2 tb hdd.
I have heard about raid 5 but from what i have read this spreads the data across multiple drives and the drives used have to be the same size and so wont work how I would like them to.
I have 2 ssd drives and one mechanical for back up.
Currently I have windows 10 installed on one SSD and nothing on the second. I have cloned the SSD with OS onto the mechanical and I am trying to boot to it and format both SSD drives so I can pool them into a single storage drive with the new windows 10 utility.
I have changed my boot order in the bios to boot from the mechanical drive but windows will not let me delete/format the SSD that I originally installed the OS onto.
I've about 4 SATA HDD's that I've removed from computers that I've junked -- all SATA about 12 TB.
Is it possible to build an enclosure and create a NAS drive -- I can easily make external USB drives but I think a NAS storage system would be better. What I need to do --should in theory be easy just need some sort of network card and an OS.
I have Windows 10 Pro installed on an SSD in AHCI mode.
I would like to add a RAID 1 array to this system for storage but I understand some registry tweaks must be made before I can change my BIOS from AHCI to RAID mode or I'll end up hosing Windows.
I've read that the edits for older Windows at [URL] do not apply to Windows 10. know the registry edits that work for Windows 10?
I've rescued an old small server(working with Red Hat enterprise -- but I can't have the OS as it's licensed by the office) from our office --was being chucked out but looks quite good to me.
4 SATA bays populated with 4X 3TB HDD's (the HDD's were mine BTW !!!). I'm thinking of using this as a NAS server - 16 GB RAM and decent Intel CPU (i3 equivalent -- good enough for media server).
The only problem is that it's MBR BIOS and I have two RAID 0 arrays consisting of 2 X 2 3TB HDD's.
Installing Windows though -- No HDD's seen !!! yet there's 12 TB of them in the system.
The RAID is onboard --not a separate RAID controller.
Should I remove the HDD's and send the server on it's original journey to a one way trip to the City's TIP.
(On board VGA good enough also for running a GUI - if I can ever install an OS on it -- preferably W10).
My current hard drive is failing and, since I have two brand new identical hard drives lying around, I decided to do a RAID 0 set-up. I went into the BIOS and set SATA 1-4 as RAID and 5-6 as IDE. I left the Raid ROM as Legacy. I then went into the RAID set-up and turned both hdds into a RAID 0. I then inserted my usb stick with Windows 10 and started the installation process. The installer saw the raid without any issues, installed windows, and then rebooted. Unfortunately, it was at this time the error in the title appeared. No matter what I did, it would not stop producing the error. Even attempting to boot to my previous hdd (which was not included in the raid set), would produce the same error. The only way to stop it was to turn off the raid and completely remove all of the raid set partitions. This allowed me to boot into my old drive at least.
Specs:
Operating System Windows 10 Pro 64-bit
CPU AMD FX-812034 °C Zambezi 32nm Technology
RAM 32.0GB Dual-Channel DDR3 @ 2400MHz (11-11-11-28)
Motherboard ASUSTeK COMPUTER INC. CROSSHAIR V FORMULA-Z (Socket 942)28 °C
Graphics G276HL (1920x1080@60Hz) 2047MB NVIDIA GeForce GTX 750 Ti (EVGA)28 °C
Storage
465GB Seagate ST9500325AS (SATA)26 °C
1397GB Western Digital WDC WD15EARS-00Z5B1 (SATA)33 °C
465GB Seagate ST9500325AS (SATA)24 °C
298GB Seagate ST3320620AS (SATA)32 °C
232GB Maxtor 6L250S0 (SATA)35 °C
7GB Memorex TRAVELDRIVE 005B USB Device (USB)
Optical Drives HL-DT-ST BD-RE WH12LS30
A small server setup by a linux programmer who is no longer available and support is non-existant failed after an automatic update left the machine unreachable from the LAN. Samba crashed and I now have 2 RAID arrays formatted NTFS that have thousands of files. I am going to install Windows 10 Pro on it. Will I be able to recover the data on the two RAID arrays?
View 1 RepliesThe power went out while doing a Windows 10 update. I purchased a USB to SATA connector, connected it to another Windows 10 PC's USB port. The external hard drive that I removed from my other PC is not showing in Windows File Manager.
View 9 RepliesUsually when we plug in a SATA drive it will show up in explorer but it doesn't now after I install Windows 10 (clean install). It work well when I'm on Win 7.
I've check the BIOS it indicate all ports AHCI an I never change anything since Win 7. So what could be the problem? As I swap drives often this feature really important for me...
I've just added a 2nd HD to my Dell system with Win 10. It shows in the BIOS and Seagate tools finds it. It does not show up in Device manager or Computer Management/Storage - Disc Management or anywhere. Not sure if this si Won 10 specific.
View 2 RepliesI am converting an existing Windows 10 Pro laptop to RAID 0 - and I keep getting to the final boot where it says INACCESSIBLE_BOOT_DEVICE. What am I doing wrong? The laptop has two 1 TB Samsung 850 SSDs that are identical. Laptop is a HP Zbook 17.
Here are my steps:
1. Made a good System Image of C: drive on separate external SSD drive connected by USB. D: drive didn't have anything on it to be saved.
2. Used Win 10 Pro DVD to delete all partitions/format drives.
3. Went into BIOS and changed from AHCI to RAID, and also to turn on ability to do Control-I to get to Intel RST ROM.
4. Rebooted, did Control-I, created a RAID 0 of the two disks.
5. Rebooted, installed Windows 10 fresh. Verified it would reboot on its own.
6. Rebooted, went into Repair on Windows 10 DVD. Selected external SSD image to do image restore from.
7. Rebooted - verified on Control-I that the RAID 0 array is listed as "bootable"
8. Rebooted - get INACCESSIBLE_BOOT_DEVICE.
The place it dies - I see the little Windows 10 blue window, and the spinning circle at the bottom - then I get the blue screen with the message.
