Why is it that, at random intervals, my Ethernet connections suddenly disappears (sometimes saying "An Ethernet cable is unplugged" or some such) only to magically reappear when I just disable and enable and connection? It's a PK5001A modem provided by CenturyLink which works fine 99.9% of the time.
View 1 RepliesRecently up(down)graded to W10 and ever since I've had no end of instability issues resulting in BSOD's.
So far I've updated all my drivers which stopped the BSOD's for a few days but now they're reoccurring.
I can't identify a specific causation for them, of late they can occur just after startup, or within minutes/hours.
G-PC-Wed_02_17_2016_171507_76.zip
My laptop is randomly disconnecting from my new router. Sometimes it's every few minutes, sometimes it can be an hour or two in between disconnections. This only seems to effect wireless devices and I notice it most often on my laptop. The router is a Fritz!Box 7490 and is connected to 2degrees Internet. The message in the WLAN event log is :
Wireless LAN device deregistered itself (5 GHz). MAC address: 64:BC:0C:6A:79:62 The weird thing is that if I disconnect from wifi and reconnect it re-establishes the connection near instantly. Sometimes it just shows as connected to wifi but not to the internet.
I have tried factory resetting the router and I've tried setting my laptop DNS settings to 8.8.8.8 and 8.8.4.4. I have also tried to change the wifi channels in case of interference.
I upgraded to Windows 10 from 7 a few months ago, but unlike other users with this problem, my wifi started working perfectly fine. This was still the case this morning, but after I came out the shower, suddenly all my wifi connections were lost. It's a similar situation to that described here: [URL] ...., except obviously it didn't occur right after the upgrade. It's annoying that I missed exactly what happened, but oh well.
I have tried seemingly everything, including endless restarts and resetting the router, and I know it's definitely not a problem with the wifi since I'm typing this on another device on exactly the same network. One of the solutions I found was to go to the Power Management tab in configurations of the wireless device, and uncheck "allow the computer to turn this off to save power" - I found it was checked, so I unchecked it, but it still hasn't made any difference.
Initially, the wifi icon changed to an unplugged symbol with a yellow exclamation mark, but after uninstalling Hamachi, it's changed to the usual icon you get when wifi connections are available (wifi symbol with asterisk). However, the problem's been exactly the same. I have a Dell Studio 1555, which admittedly is quite an old machine, but it was fine until now.
My desktop is connected to my router by Ethernet. However, the printer I use is in my wife's office on another floor. It is a wireless Epson Artisan 730. I have added a Dlink DWA-171 wireless usb adapter to my desktop to print wirelessly to the Epson.
However, every time I want to print, I have to disable my Ethernet connection so the WiFi connection will see the printer. Then I'm done printing and I re-enable the Ethernet (faster, more stable).
I have recently upgraded from Windows 8.1 Pro to Windows 10 Pro and everything was fine then. But recently I am experiencing an issue which is Windows weather app dissapears/close suddenly when kept open for a few seconds.
I am showing a video regarding the issue .... [URL] ..
System Specs:
CPU - Intel Core 2 Duo
Motherboard - Gigabyte (G31M-ES2L)
RAM - 4 GB
Graphics Card - NVIDIA GTX 560 (2 GB)
OS - Windows 10 Pro (64 bit)
2 days ago, I was happily enjoying my internet when suddenly my internet stopped working, I checked it and it showed that the ethernet cable is unplugged. I have by now, tried reinstalling win 10 (lost all my files and drivers ) and few more things like automatically searching for updates online. I have a realtek family controller
View 1 RepliesI have built a number of PC's and my latest PC crashes at irregular intervals. I have tested the memory and have a new power supply. This was occurring in Windows 7 and is still happening after upgrading to Windows 10.
It happens at irregular times and does seem to be heat based.
Windows 10 gives me a blue screen message about closing down and I have checked the event logs with out success.
W10 old insider build upgraded to w10 pro. No matter what media: mp3 in WMP, AUdio in movie or audio in the flashplayer(youtube). My audio distorts in periodic intervalls with an foreign noise distortion.
I have an old Laptop that still has official W7 drivers and they are at least partly installed(chipset) but the grafics driver is installed from W10 as the official ones from ATI and my laptop manufacturer wont install.
I ran the windows driver stresstest as advised in this forum but the laptop crashed BEFORE THE BOOTLOADER! ... had to boot it in safe mode.
Here are the logfiles : WIN-4NE8IBU1EPP-20_08_2015_235238,98.zip
So basically I installed windows 10 3 weeks ago.Its been working perfectly fine until I got this problem today.when I click on the wifi at the bottom right.it tells me no connections are available,I tried re booting my desktop,uninstalling and reinstalling the network drivers but nothing works.the weird thing is that it says the drivers are working properly but yet it won't let me connect.also my network adapter settings folder is empty.
View 5 RepliesWhat these Windows system connections were for? Just want to know so I can decide whether to block the destinations, or executables in my firewall.They occurred while I was logged in, but not running anything yet. There are other connections, but I've listed these ones because they seem to be new to Windows 10.
Name: SIH Client
Version: 10.0.10240.16384
File Path: C:WindowsSystem32SIHClient.exe
Connection Origin: local initiated
Protocol: TCP
Local Address: EDITEDOUT
Local Port: 49487
[code]....
I'll have connections available on my computer (Windows 10 Home 64-Bit HP) but whenever I click the connection menu, they don't show up, which means I have to reset the modem, wait the 15 minutes it takes, and then the connections FINALLY show up. Once I'm connected however, if I click the menu again, the connections wont show up. The image I've connected shows what I'm talking about. I can wait for a long time and connections still don't show up. I was wondering if there's a way to troubleshoot this without resetting the modem every time I want to use my computer.
View 2 RepliesIs Remote Desktop only available on Windows 10 PRO? I have Win10 Home and the option to "Allow remote connections to this computer" is not present.
View 4 RepliesMy network icon has a Red cross on it and says no connections are available . I have a toshiba satellite. and my windows 10 was working fine.I used to hook up no problem.
I went to settings and open network and internet, I fond no wifi section in it.
Windows 10 upgrade results in the Network Center not showing any network connections. The troubleshooting wizard does not detect the issue or rectify it. There are a lot of reports on the web supposedly related to pre-installed Cisco VPN or other VPN software.
The downside is that without this feature, crown jewels... Cortana and Edge do not work.
So originally I upgraded my mini PCI card and was trying to get that working... It was recognized in the device manager but not the network connections.. I could not see the adapter to use or enable/disable etc despite having the drivers up to date. Now I have my old card back in and now have the same issue with it! It is present without a problem and with the newest drivers in network connections... But I can't use it, can't see it anywhere else! I try to create a new connection in network connections and it does not give me wireless as an option.Running Windows 10 64bit on a Sony VAIO SVT151A11u laptop.The old wireless card that is reinstalled is an Atheros AR9485WB-EG.
View 1 RepliesI have a new HP laptop win 10 installed and I like it very much but I have an issues with One Drive .
I use my WiFi connection at home for browsing and usual stuff which is fine and One Drive uploads to the cloud with no issues and of course does not affect my data allowance as my Internet connection is unlimited.
In my workplace I do not have a land line and use a talkTalk MiFi dongle with a 5gb limit . I connected to the MiFi and carried on as normal but realised that the One Drive used my data quickly and soon I had a message that I had no data left .
My enquiry is can I get One Drive to ignore my MiFi connection and only do the uploads on my home internet connection only ?
I need a program which will show all the incoming and outgoing connections of the system from various process. The program should be able to point out the incoming weblinks as well to any programs in order to trace them back via web browser.
Or in other ways, an app to know from which links the other programs and downloading their files in order to trace them back and download them directly with a download manager.
An Advanced TCP View which shows full address of files.
I have a pocket Wifi Device, however, it is NOT using Wifi connection, as I have it connected to my PC using an USB Cable. Every morning I turn on my PC, it creates a new network connection, for example "Network 7"
How do I remove Network 1 to 6, and where are they located?
And how do I stop it from happening, as it seems it will keep going to Network 8, then Network 9 and so on.
I installed Oracle's virtualbox on a windows 10 machine. I'd like to download software to it like adobe reader. I can't. I can start up internet explorer and connect to the web and if I click on links it goes to those links. If I try to go to google.com I get a message that it can't make a secure connection. I tried downloading adobe acrobat in windows 10 and transferring it with a shared folder to the virtual machine. I was able to transfer to the virtual machine but when I tried running it, it tried to connect to the web and could not. This looks to me like a security problem because the browser can connect to some sites in the virtual machine and only complained when they were secure sites. Is there some security setting in windows 10 that could be blocking virtualbox from connecting to secure sites?
View 4 RepliesI recently purchased an all in one HD PC which has windows 10 as its operating system. When trying to set up broadband connections and email accounts I have encountered problems. Technicians in both cases said there were probably corrupted files in the system. Another problem is the when the computer goes into sleep mode or is shut down the modem also switches off. I have been told by Telco technician that the modem is ok. It is only connected to PC by Ethernet cable.
View 8 RepliesMy Dell XPS 8900 worked perfectly fine for several hours, but now won't let me connect to the Internet. Another computer in the same room gets online without a problem, using the *same* internet cable.
I also get error messages on the Dell when trying to use system restore, and when trying to reset the computer. (I thought if I just started over it might fix it.)
There is an icon on the screen lower right of a little monitor, with red X over it. When I click that it tells me "no connections are available." I've unplugged and replugged everything (modem, router, computer) and nothing has worked. I have Windows 10. Anything I should do?
I have a large number of TCP connections open even immediately after a reboot. It's normally around 200 with only Dragon NaturallySpeaking, Know Brainer, Norton Security and my VoIP phone (X-Lite) along with a few other minor programs and normal Windows 10 background tasks running. I run Malwarebytes regularly and never find anything wrong and have Norton Security set at maximum levels. I'm attaching a file from TCPviewer that was taken immediately after a reboot as an example.
View 3 RepliesOk so got a new usb WiFi adapter. I installed the driver first which I downloaded on my phone then transferred to my pc via usb cable. Have tried reinstalling multiple times, still won't work. I'm guessing the problem is there's no win 10 drivers for it. NOTE: I did have a old usb adapter working with no driver before but not even that's working even with drivers uninstalled. The new adapter shows up in device manager with a problem indicated with a code 10.But not in network devices.
View 1 RepliesHow to setup my office's wired network with one main server through which all the traffic goes while filtering everything I have blocked?
Also, I have a 5 port hub, can I work with it or do I need a bigger switch?
I only have 5 PCs in my office.
I have recently bought a dell xps 8700 and it worked great for about 3 days then the wifi would disconnect and not recognize any connections even though every other device in our house works perfectly. I am 100% certain it is an issue with the computer itself and not the wifi network i had to return the computer for a new one twice already and the issue has happened with every single one. i have tried updating the network and chipset drivers witch resolves the issue for about 2-3 days. what would cause the exact same issue to re appear on 3 separate products is beyond me. i am also aware of the issue with old vpn software from windows 8 but the computer came with windows 10.
View -1 Replies