Automatically Detect And Install Driver
Sep 2, 2015
I have a Toshiba Sattelite C75D-B Laptop that I did a clean Windows 10 install on, after upgrade. Should I need to install a graphics driver? Or would the Windows 10 Media Creation tool disk I burned have installed the proper one?
If not, I have always used nvidia on my homebuilt systems, but this laptop has a AMD A6 sticker on the top. So does it use AMD Radeon Graphics?
If so, can I use the "Automatically Detect and Install Your Driver" function on the AMD site?
View 1 Replies
Similar Messages:
Jan 22, 2016
My drivers failed to install correctly, my computer black-screened during the install of them when I was using Driver Booster. Now my PC isn't detecting my second HDD. It is in BIOS, but not in Device Manager. It is not showing up in all utilities, even if I show hidden ones. The stupid program didn't create a backup and I can't tell for sure what drivers it has broken.
I think some were Human Interface Devices, Universal Serial Bus Controllers, some SATA controllers and some others, can't tell. It also isn't showing up where you format and partition drives, windows just straight up can't detect that it is connected. I have tried Windows Repair, didn't work. I can't find any info, I don't have a way to roll-back. Will resetting my PC even work? Now I can't access my main drive, how can I reset these basic drivers without being able to rollback? I have seen some mention of uninstalling drivers such as...
"I had similar problem with my added disk drive when I upgraded. I had to go to device manager IDE ATA/ATAPI controllers and delete all ATA channels, back out and restart. Let Windows find all ATA devices and there were both my disk drives.."
But I am not certain whether it is safe to uninstall that driver or others. All my files are on that drive. My PC now cant detect my on-board SSD too and it cannot detect my CD-ROM too. Would resetting my BIOS reset the those base drivers?
View 1 Replies
Sep 15, 2015
This issue happened after I upgraded to Windows 10 from Windows 7 on my HP computer. We also have another older Dell computer, on which this issue did not occur after upgrading to Windows 10 from Windows 7. I followed advise from an IT technician provided about this issue with Windows 8.1 including editing the registry (Internet Settings and Default Connection Settings) and have no trouble accessing the internet. However, typically after every day or every other day (at most after three days) turning my computer on after being off overnight, the internet connection settings revert back from automatically detect settings to proxy server.
I do not use a proxy server and cannot access the internet when this occurs. This keeps happening even though I go back and reedit the register. What can be done to permanently fix this problem? I am currently using Internet Explorer 11 instead of Edge until Microsoft comes out with their update in early November that allows extensions. I use Norton 360 and cannot use this program with Edge until extensions are allowed, because of security on the internet.
Since this does not happen with the Dell computer, I checked the settings mentioned by the IT Technician and found that the following Internet Settings were not present in the registry: ProxyHttp.1 (or ProxyHttp1_1) and ProxyServer. Will it harm my HP computer if I delete these two from the registry so that the Internet Settings will be the same as those on the Dell computer, which as pointed out above does not have this problem? Also, for ProxyServer the IT technician indicated that there should be no value for this in the registry.
View 4 Replies
Sep 24, 2015
I recently upgraded to windows 10 from windows 7 and have been encountering problems since then.When I try to access any website using my mobile's hotspot all the browsers except firefox show the same message that is "Can’t connect to the proxy server".
So I went into proxy setting and saw that whole area was grayed out and at the top was a message saying "Some setting are managed by your organisation ". The first option in proxy settings is "Automatically detect setting" and it was turned on but because it was grayed out, I couldn't change it.Then I typed internet options in the search bar and clicked on it and a dialogue box appeared and in it I click connections tab and right at the bottom was a message saying "Some settings are managed by your system administrator.
I went into LAN settings and there too everything was grayed out and the automatically detect settings box was checked here too.This problem is not confined only to browsers but my in my Steam account I cannot update my games and also when I try to access news from the steam client it gives and error code.I did a bit of research about that code and found that it was related to proxy.Even my windows update is not working. Every time I try to update it it just stucks at 0% for hours.
View 1 Replies
Apr 25, 2015
Instead of doing an upgrade of Windows in place, I am trying to do a install from the ISO using EasyBCD.The ISO launches fine as the setup starts but Windows refuses to see my HDD.I have an Elitebook 9470 laptop.
It uses the Intel storage drivers for AHCI and the HDD itself (Intel SSD)Bios is set to use UEFI Hybrid (With CSM).
BIOS can not use UEFI (without CSM) mode as the system does not boot.Tested using Legacy mode and still unable to see HDD. BIOS version is F60 (Jan 2015) and is the latest.
View 4 Replies
Jan 24, 2016
New build. From a fresh install of windows 10 i try to install the drver for my IGPU Intel HD 530. each time i do that i get a BSOD with this message:
VIDEO_TDR_FAILURE igdkmd64.sys
Or sometimes it's
SYSTEM_THREAD_EXEPTION_NOT_HANDELED igdkmd64.sys
I've tried drivers from motherboard manufacturer CD, website and intel and some autodetect driver software. I always get the same behavior:
The screen start blinking several time ( black screen) before showing the BSOD then reboot and repeat it self. Even the driver downloaded by windows update have the same impact.
I've managed to install it in safe mode but when i restart in normal mode i get the same behavior.
I've tried 2 different monitors, VGA and HDMI , tried with UEFI on/off => same result.
I've tweaked once the tdr delay to 8 second, but didn't work.
CPU: Intel I7-6700KMotherboard: ASUS Z170 PRO GAMING
RAM: HyperX FURY HX421C14FBK2/16 - 16Go Kit (2x 8Go) 2133MHz DDR4 Non-ECC CL14 DIMM
SSD: Samsung EVO 850 MZ-75E250B/EU 250 GB
with 80 PLUS 550W power supply.
OS: WINDOWS 10 FRENCH HOME X20-25432
View 6 Replies
Dec 18, 2015
I already have my pc updated with windows 10, I recently upgraded my hard drive with a samsung 850 pro ssd but i discovered that my recovery partition no longer works and when i try to do a system image windows says it cannot do it because files are missing . I used the samsung data migration software that came with my ssd, when i go to disk management it shows my three partitions which are
500mb recovery partition
260mb efi system partition
windows c 476.18 gb ntfs , boot,page file, crash dump, primary partition
My question is if I do a clean install of windows 10 will these partitions be created again during the windows 10 installation automatically or will I loose some . I want to be able to recover my pc should I need to and have everything working. Someone suggested that I don't need a recovery partition and windows 10 does not create new partitions .
I don't know what the efi system partition is and don't know if i need it . i have watched some youtube videos of people doing clean installs of windows 10 and they all seem to differ . during installation when given the choice of where to install windows some people delete all the partitions on their hard drive while others pick which one .
View 9 Replies
Sep 28, 2015
I have my settings configured to automatically download and install Windows updates, yet every single day I have to manually check for updates and there are always updates found, which then proceed to be installed. Why is this? By very definition, shouldn't "automatic updates" mean that nothing should be found when manually checking for them? Yet this is a daily occurrence.
View 2 Replies
Aug 24, 2015
I have an ASUS Sabetooth z97 Mark2, updated to the latest bios and when I install Windows 10 the first thing I notice is it is using the default microsoft video driver. I have an ATI FireGL v7350. I downloaded the latest driver and installed it, but it does not get picked up. I have updated the chipsets with the latest drivers and still no luck. I have four other computers that are a lot older and didnt have a problem one installing Win10. This box which has the z97/ati video/32g of ram/SSD. just will not upgrade properly.
View 1 Replies
Jul 29, 2015
If I do a fresh install from a USB for Windows 10, after it's installed, will all the drivers be there from 8.1? Or do I need to manually download ALL the drivers again? This seems like a huge oversight if people want to do a fresh install to not bring over old windows (registry, errors, corrupt, and otherwise) files.
View 1 Replies
Jan 1, 2016
I recently replaced my GTX 660 with a GTX 970, and after I had completed installing that, the PC started up perfectly. The only issue was the internet said it was not connected (with a red X on the connection icon). I used the troubleshooter to discover that I did not have a LAN driver installed and windows didn't couldn't detect what I needed. I check my files and the driver was still there, so I uninstalled it expecting the disk that had come with the box of the motherboard to reinstall the driver correctly. After I had uninstalled the driver and used the disk to try and reinstall, the driver did not reappear. I searched for a driver install separately on my laptop, but to no avail. Nothing seemed to be compatible with my motherboard. The driver which I had assumed matched state that it could not detect the family of driver on my PC. I tried to do a recovery but didn't have a backup file, and resorted to a factory reset. After trying the disk after the reset, and continuing to search for the right driver, I came up empty handed.
View 9 Replies
Oct 14, 2015
i've updated to windows 10 on my pc and i'm unable to download the driver for my epson sx235w printer to my pc. i've tried the install disc and also via the drivers online. each time it starts to download the drivers it gets stuck on the download part with the spinning wheel for at least 30mins.
the printer was working perfectly on windows 8 via a usb cable, but since going to windows 10 the printer isnt recognised and the drivers wont install.
View 9 Replies
Jun 21, 2015
I upgraded both my desktop and laptop to Windows 10 recently. The desktop's upgrade went smoothly; NVIDIA already has Windows 10-compatible drivers. However, my laptop with Intel HD Graphics is a different story. I've tried the Dell-certified drivers as well as the latest ones directly from Intel, and neither work.
When I attempt to install the driver, I get an error message stating "This computer does not meet the minimum requirements for installing the software."
View 9 Replies
Aug 15, 2015
Have Z97 GAMING 5 (MS7917) 1.0 MoBo with Intel Core i7 4790K Just clean installed Windows 10 after upgrade from 7 Pro, but had issues with a Samsung SSD 840 EVO 250GB with MBR instead of the prefered one. Had to EUFI instead of BIOS, and apparently, my data drive (ST4000DM0001F2168) was converted and made the system disk to boot from. Anyway, Windows 10 starts and all, but it will not connect to the internet, 'no network drivers are available'. I downloaded the AMI Bios flash v1.b and updated that. Also downloaded MSI LiveUpdate 6 and installed it via USB stick, but nothing shows up on the scans as it cannot connect.
This all started because the stupid "USB Device not recognized" error message kept popping up and Chrome became so slow back in Windows 7. I did everything I read, to include popping out the MoBo battery. The error message still pops up in Windows 10, and Chrome was still slow after the upgrade. Figured a clean install would fix it all...and now I have a very large paperweight...
View 1 Replies
Aug 27, 2015
Upgraded to Windows 10..
Problem is audio driver. Each time I use the driver on ASRock page it says its two part process.. says it uninstalls old Realtek driver, reboots, and installs new ...
Each time it reboots and starts over saying it has to remove old. I tried removing old on my own first and starting over.. still no effect.. what do i do ...
I am a bit suspicious if Windows keeps on installing an older driver or something so it keeps starting over...
View 1 Replies
Aug 8, 2015
I learned how to perform the clean install of Windows 10 after the upgrade. The problem is after I'm finally at the desktop. There seems to be a background process of installing the realtek drivers and Nvidia drivers. But Windows update will also detect the Nvidia drivers and install them as well. But they fail every time.
View 1 Replies
Nov 21, 2015
I have a notebook with nVidia 860m video card. There is GeForce Experience preinstalled and it recommends to update driver. Problem is: Win 10 does not recognize 860m after rebooting my system when I install nVidia's fresh drivers. I don't understand that sort of problem because I always updated drivers on win 8.1 without any problem, win 10 is updated regularly. So if I am interested to install recommended updates, is there a way to understand will it work or not after reboot without actual install? I tried to installed drives via devices manager, it is installed without any problems but does not work after reboot.
View 9 Replies
Aug 5, 2015
I did a clean install of Windows 10 on my Lenovo Miix 2 8 tablet. Everything went fine. But, I wasn't able to install the driver for the internal GPS. It's a Broadcom BCM4752. The installation of all drivers I found (including Lenovo) ended with the message: "An upgrade was needed. Please reboot your system and restart the installer." Which I did - but, it didn't work!
Installing the driver under Windows 8.1 and upgrading to Windows 10 worked without problems!
View 2 Replies
Aug 21, 2015
I checked my available updates this morning to find that Windows 10 has downloaded and wants to install the "latest" video driver for my Radeon 7700.
I have used AMD Auto Detect and it tells me I have the latest driver (15.7.1)
I have used the instructions on this web site to disable automatic driver updates.
what is this driver? I have read before that Microsoft sometimes tries to download and install drivers that have already been installed or are already up-to-date.
View 1 Replies
Aug 15, 2015
As I encounter problems with my Lan driver Realtek and Windows 10 Pro 64, somone on the forum said me to download the last version from Microsoft update catalog which seems the good one.
So I downloaded the driver but it is a .cab file. When I unpacked the files I obtain four files : a .cat file, a .inf file, a .sys file and a .DLL file. There is no setup.exe file....
I tried to install the driver using the command "HDWWIZ". It sees the .inf file but noting installs..
View 6 Replies
Jan 21, 2016
I have installed intel's driver detection tool and it informed me that I have a custom driver installed by the manufacturer. Acer site scanned my pc and found new driver VGA 10.18.15.4248, which i downloaded but upon installation tells me is the wrong driver for my pc. I have upgraded(haha) from win8.1 to 10, not sure if this is part of the problem. This driver was released 7/15. I ran windows driver updater and it tells me the driver I have, the only one btw, is current. I have tried to contact both Acer and Intel and get no answers.
View 5 Replies
Aug 3, 2015
I get the message this computer does not meet minimum requirements. I have gtx 970 with latest driver and I installed latest drivers from mainboard site. My motherboard is asrock z97 fatality killer. My cpu is i5 4460.
View 1 Replies
Nov 10, 2015
Recently I was notified that a driver installation failed. I went and checked it out, and it was a driver for HD 4600 graphics. My old system ran an i7-4790K, and when I upgraded to X99 I did not reimage my SSD.
Is there a way I can remove an update from Windows Update? The CPU I have has no iGPU, let alone HD 4600.
View 1 Replies
Jul 30, 2015
On Windows 8. 1, I had no issues with this speaker. It's a JBL Charge. After upgrading to 10 it worked fine until a reboot when it failed to connect (it pairs, but won't connect, and the speaker doesn't appear as an audio-out option in Sound settings).
The Bluetooth wizard in PC Settings says "Driver error" next to the speaker icon.
Poking around in device manager, I see this error:
"This device cannot start. (Code 10)
{Conflicting Address Range}
The specified address range conflicts with the address space."
The only references I find to this error online are for different (and quite old) version of windows, and seem unrelated to Bluetooth.
I can't even look at the "resources" tab because it appears to have vanished in Windows 10!
View 3 Replies
Oct 1, 2015
I'm trying to install Tascam US-1641 Audio device to my pc. During installation I am connecting the device and everything just freezing. And error coming again and again. I try to uninstall drivers on safe mode, i also use third party programs for deleting registration files. Everything looks like updated, but the error keeps coming. How can i fix it?
Lastly i even try to reset Windows 10 and nothing changed.
View 1 Replies
Oct 30, 2015
I have an HP G42-154CA that I'm trying to get Windows 10 Pro installed on.
[URL]
I ran into an issue with the installation disc not detecting the hard drive (ie, no hard drive is listed when the screen appears to select the hard drive to install Windows on).
I've tried various drivers (latest from HP and Intel website, OEM OS installation discs etc) with no luck.. at the very least, the Windows 7 driver from HP's website for that laptop should work for installing Windows 7- same results, does not detect hard drive.
At this point I'm wondering if maybe it's a BIOS setting that's causing this? I don't recall changing anything in the BIOS when I last installed Windows (which was v8), but it was awhile ago, so can't be certain.
View 10 Replies
