Recently installed my new A10-6800K CPU, worked perfectly. checked my system information to make sure everything was at the versions they needed to be, noticed that the MoBo (gigabyte f2a68hm-hd2) version was from 2014 so i updated it to the latest version but delayed when it asked me to restart. everything carried on as normal
got back from work, turned it on. bam,
"BOOTMGR is Missing
Press Ctrl+Alt+Del to restart"
I tried pressing them on wireless keyboard - it didnt work. tried it on my wired keyboard - didn't work.
I tried putting the windows installation disk in and restarting it - didnt work.
I think it was the MoBo update that did it...
Specs:
Windows 10
Gigabyte F2A68HM-HD2 Motherboard
8GB DDR3 1600mhz RAM
1tb Seagate Barracuda Sata
A10-6800K
EVGA GeForce GTX 750ti
Unplugged internal HDD and put the installation iso on an ext. HDD.. manages to get onto installation part (it complains that it cant install it on my ext. hard drive)
I started my PC this morning and was greeted with a BootMGR missing error, i followed a few things online including going into the CMD and entering the following codes;
They didn't work so i've decided it would be easier to just reset my OS, however if i try to reset i'm told i haven't enough space in my C drive. So how can i make space without being able to go into my PC properly?
I have Macbook with Yosemite. I had installed win7 32bit Home basic, later on upgraded to win10 64bit.I have recovery drive of win10 on usb flash drive.Now while I open win10, it shows "BOOTMGR missing restart.What is the solution to get win10 back
Got a new Samsung SSD, used the software that came with it to move C to new drive. Ended up with msg "Bootmgr missing". Reinstalled original hard drive, got the same msg. Pulled out SSD, hooked it up to my laptop. Looked at it and the software cloned C drive but the sequence is wrong. It has the 450meg partition first, then the UEFI partition and then the Primary partition. Is there anyway to move the partitions to the correct sequence? I can get into the BIOS but I can't do anything mouse, keys,tab nothing will work so I can change the boot order to my DVD drive to install a fresh copy of Windows.
I used TrueImage 15 to clone and shrink my win10 load to a new SSD. Original drive was a 1tb with 120g used in a 900g partition. I had TI clone and shrink that to the 240g SSD. However, the bootmgr was left behind.
I used EasyBCD 2.2 to put the bootmgr back but now it seems to be still missing a few secret win10 parts and asking for startup repair.. Can I use the downloaded win10p64 cd?
I just finished building my first ever PC. I am using the education edition of windows 10 if that makes a difference. I downloaded it to a blank flash drive I had lying around via this link: [URL] .... When I tried to install windows, it said "bootMGR is missing". I set the flash drive to boot first in BIOS but it still doesn't work. I am wondering if it has to do with formatting or something like that.
Specs: i5 4690 MSI z97 PC Mate LGA1150 Motherboard G.Skill Ares 8GB RAM NZXT Phantom 410 Case Sapphire R9 270X 4GB GPU Western digital caviar blue 1TB Zotac 120GB SSD SeaSonic S12II 620w Power Supply Asus PCE-N15 PCI Express Wifi Adapter
As IE11 was malfunctioning, and my GT610 driver doesn't seem to work properly in Win10 32 bit, I attempted to upgrade to Win 10 x64 on my machine (Dual core, 64 bit ready, 4GB ram), and whilst doing so I think I've deleted the C: boot partition. I had partitioned the C drive and put the data in F: drive partition before hand so I didn't lose all my data.
When rebooting, I got the message "bootmgr is missing", so tried to boot from a Win 10 32bit iso DVD. I can get the DVD to launch, and tried to go through a repair, but got the message that the drive/partition was locked. I can't repair it, or boot. I also tried fixing it using Minitool Partition Wizard, which shows the partition without a label and as "unformatted". wasn't sure whether I should format the partition or not.
what I can do, to unlock the drive (from command prompt?) and then reinstall or repair Win 10.
Can I keep the F: partition with the data on it whilst doing an install of the x64 bit windows, or will I have to reformat the whole disk because of the different architecture?
My original os is win7 then i upgraded to 10... After a while of using it... It opens the Blue screen saying unmountable boot volume.. Also i dont have win7 cd since the os was built in...
Next i rebooted it, it says "preparing automatic repair" i tried to wait.. But after it says that, it goes to a black screen and nothing happens
Then i tried dloading the iso from the site and then burned it to a usb.. Then it says
Press any key to boot from USB
*presses any key*
BOOTMGR is missing
Press ctrl+alt+delete to restart
Is the problem in the usb or it just wont open because of the error?
I only have recovery disks on win7
My laptop is Vaio SVE111A11W
Cant open my laptop due to this so i cant really attach the needed files..
So I installed Windows 10 and my keyboard has been rendered useless. I chose to jump the queue as it were (rather than wait for the on-screen notification) - not sure if that's relevant. The keyboard is made my a Chinese company called E-Elements. It's a mechanical keyboard with RGB lighting URL...
The RGB lighting works perfectly fine (but then it would because it's just being powered via USB) - the problem is that none of the keys are working. The NUM LOCK and CAPS LOCK LED indicator also isn't working. I tried a different keyboard (non-mechanical) and that works fine, so thought the keyboard itself was the issue. I then plugged it into my PS4 and it works fine. I then booted my PC in BIOS and weirdly it also works fine in BIOS, so it's definitely an issue with the keyboard communicating with W10 or W10 communicating with the keyboard.
Another thing I should probably mention is that when I installed W10, I didn't do a clean install, I chose to keep my files and settings. I have since, however, reinstalled W10 as a clean install as I had backed everything up anyway - it still didn't work. Somebody suggested simply reverting back to W7, but I have now lost that option since I have reinstalled W10 a second time.
I have also checked Device Manager for any USB devices with an exclamation mark, and reinstalled several drivers. Weirdly, the device manager does actually recognise it as a keyboard.
I have one key working only when held down long enough (when it starts to spray that letter). Not an hardware problem.
Estonian keyboard layout. English keyboard layout works fine. Finnish keyboard layout has different key not working.
On-screen keyboard has same problem.
Problem started just one day. Before was fine. I have tried some malware scans, registry fixes, safe mode, keyboard driver reinstall, other keyboard.
Where could this problem be located? Registry? Someone in internet thinks its malware. I dont think I installed something new previous to that problem.
I have a Anitech P201RU keyboard and when I boot my PC the keyboard works fine until the login screen. I have tried turning on legacy in bios and turning it off and tried uninstalling the drivers. What I noticed is that when I go into device manager it shows a exclamation mark next to the usb composite device.
I have a Logitech wireless keyboard that uses a USB device. After a update on the 10 of March my keyboard stopped working. I have tried another wireless USB keyboard Mircosoft and a a wired Microsoft keyboard without success.
I have followed a few of the suggested fixes after doing a search without success.
I have a laptop of Haier company and my laptop's keyboard is not working after up gradation of windows 10 from windows 8.1 Pro. only a on screen keyboard is showing now.
My PC was working fine until today. Now when I boot up the lights on my razor keyboard illuminate but when it gets past the bios the lights turn off.
When the login screen for w10 comes up I can't login because both the keyboard and mouse are not responding.
They work fine in the bios. I am using a custom built PC (a88x-gamer MOBO) and a corsair m65 mouse with a razer black window 2015 keyboard and running Windows 10.
After I installed Windows 10 from windows 7 I couldn't use my mouse and keyboard it works when I boot up BIOS Utility but when im on windows 10 it does not work. I tried switching usb ports and that didn't work either.
I've had a series of problems with Windows 10. Latest (last couple of weeks) Thunderbird and all browers have been gradually getting worse and worse. I decided to restore the system this morning but I get stopped every time by a screen where I am to select a keyboard to use. This is where both the mouse and keyboard don't work.
i am running a Samsung NP940XG3-K03US. I just upgraded to Windows 10 and my keyboard and touch pad are not working. I have tried windows update, intel update, samsung update tools and nothing has worked.
