I recently updated my HP to Windows 10. During setup after I logged in, I got the BSOD. I thought there was nothing wrong until I logged in and found out that I didn't have Start Menu access. About 10 seconds later, the BSOD came up again. Now every time I log in, about 10 to 30 seconds after login, I get the BSOD.
View 6 RepliesI've had this issue for a while and haven't really bothered to do anything about it till now. Since I upgrade to Win10 some months ago, I've noticed that every time I start or reboot my PC my internet connection dissappears after the first 5-10 seconds and then returns some ~60 seconds later. The loss of connectivity is not displayed in the Network sys_tray nor will Chrome/Edge tell me I do not have a connection. What happens instead is that the browser tabs take a very long time to load until they all suddenly load at once. Services like steam connect on start up, but then I go into offline mode as soon as I "lose the connection".
I'm not using WiFi and have not changed any hardware since upgrading to Win10. My suspicion is that I'm able to receive packages, but my outgoing packages are being, somehow, blocked. I am using zonealarm but have also tried with it uninstalled.
For two years I have had three hard drives installed. One small one went bad and at bootup I would get that information with "Press F1 to resume" which I would do and then windows would load. I upgraded to windows 10 from 7 three weeks ago, same message, and no problem, as it would still go right into windows. Last week I noticed windows update had a list of important updates. I believe I also had an nvideo GeForce driver update which I am sure I did first without problems.
When I did the windows updates and had to restart, I noticed I had a slightly different look but it still took me to the same press F1 to resume. However, the result was it went to a totally black screen with a tiny band of the new windows blue across the top and in the middle of the screen it said WAIT, not in windows type but in the same script when you first begin booting computer. It just remained there and there was no activity taking place, no blinking red light or solid red light like my computer always does.
After at least 20 minutes of no activity I rebooted with the same result. Repeating the F1 kept giving the same result, and further reboots and then the F1 caused the computer to reboot maybe 2 out of 5 tries instead of directly going to the black screen. At one point I quickly saw something where I believe it askd to press tab or possibly delete and then gave an option to press F1 or F2. I am not sure which I pressed but it did go into windows and everything was fine for the rest of the day. I let my computer on but at some point overnight it had rebooted and back to the press F1 to resume which results in back to the black screen WAIT and this is where I am at again (I am using a different computer to send this).
[URL] .... To make it easy I have made a video showing what the problem is. See description for more vital info.
View 1 RepliesPrior to upgrading to Windows 10, my system was running Windows 7 Home Premium SP1. When running my previous OS (WIN 7) I rarely had errors listed in Event Viewer. Now after upgrading to Windows 10, I get errors/warnings I never used to get under Windows 7.
The error is of the "Critical" level in Event Viewer.
After doing a normal shutdown, and then booting my system, I check Event Viewer and always find the following critical error:
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
---------------------- START: Event Viewer XML error text ---------------------
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
[Code] ....
I never used to get this error after doing a normal shutdown (prior to upgrade to Windows 10, when I was on Windows 7). Now it happens all the time. Why this error is occurring after doing a normal shutdown followed by a boot?
I suspect it's a glitch with the first production release of Windows 10, but I have no proof of that. My system runs fine, yet I get the above error (and a number of other errors) since I upgraded to Windows 10.
it has given me several reasons for BSOD, such as: unexpected kernel mode trap security check failure and others...
I am running in safe mode now without problem for quite a while so I guess it is a driver problem, I hope?
here is my debug thing
When starting up the screen seems to reboot. windows menus/ bottom menu and program icons mostly dissapear and re-appear.
In the mean time windows is practically unusable. Hard to start up any program.
No error messages appear on screen.
Since I've updated from windows 7 to windows 10, the computer occasionally freezes for about 10 to 30 seconds and nothing but the mouse pointer works.
It happens every now and then but mostly a few minutes after the computer has started and then every now and then. If it freezes in the middle of a download for example, the download simply continues after the freeze ends.
I have scanned the PC with numerous anti virus applications such as ESET NOD32, Malewarebytes and Norton.
After successfully installing Win 10 it ran without any issues for about 1 day then Edge refused to launch, the splash screen opens for about 10 seconds and then disappears. The only change made to Edge was to import bookmarks from IE. Unsure where to start looking for an answer.
View 13 RepliesI purchased a hp pavilion laptop a few months ago with Windows 10 pre-installed.
I haven't used it for a few days, turned it on this evening and I got a message on boot up saying
"preparing automatic repairs" and then my screen goes blank 3-5 seconds later.
I do not have a cursor and have tried various keys and different ways of trying to bring up some kind of option. I also tried plugging my laptop into my TV to see if it were perhaps the screen that was going wrong.
Every time I try to join a wifi network, my computer crash within a few seconds. It says "system service exception" igdkmd64.sys in the bsod. So I just cant connect to the internet anymore.. im on my phone right now.
Windows 10 from win7
Intel core i7-3610qm
Intel centrino wireless-n 2230
I have a strange anomaly with my HP Pavilion dv7-1245dx Entertainment Notebook that had Windows 8.1installed. When I started bootup, it got so far and froze up. I had to do a hard shutdown. On the second try, the laptop starts, but takes an inordinately long time to get to the lock screen.
I thought that when I installed my 240 GB SSD drive and installed Windows 10 that the anomaly would be gone, but it's still happening.
If I shut down, I have to go through the two bootup tries again.
During boot up I get a black screen for about 1 min then the login for my account. I notice a lot of hard drive activity during the black screen. I'm using amd-catalyst-15.10beta-64bit-win10-win8.1-win7-oct12.exe (latest one).
Win 10 works fine except for the black screen. I've had this black screen since day one but it seems to be longer.
I have tried AMD 15.7.1 driver.
I don't have an on board graphics.
I'm almost thinking of grabbing another hard drive and do a clean install and see if that fixes it.
Sometime over the last month or so, every time fire-up my laptop, the start menu is open. I can click anywhere outside it and it will close, and does behave normally. It's more annoying than trouble. I don't consider myself a noob, but this is perplexing as I cannot find a setting to start up the OS without the start menu being open. Maybe a reg hack?
My assumption is MS did this in some recent update trying to introduce me to their new way of thinking. I only think this as after I upgraded to 10, I deleted all the tiles in the start menu that I didn't want. One day about a month ago, more came back. I figured it was MS trying to sell me on tiles, yet again.
I woke up this morning and turned on my laptop from sleep mode and it went straight to my desktop not to a screen to ask to input my password like usually. Is this normal or some mix up?
View 2 RepliesI just upgraded to Windows 10 from 8.1 with MAJOR hassles (BSOD, black screens, freezes, unresponsiveness, etc), so I decided to do a clean install. But during the install, it hanged at the black screen after "getting devices ready." I did a cold boot and got a black screen. The display didn't get a signal since the monitor light stays yellow instead of turning green.
I disconnected the power cord and held the power button down for a few seconds (some discharge static electricity method I found on the web), and reconnected the power cord, and it boot up fine into the Windows setup menu and set up everything fine. After downloading some programs and stuff, I turned off my PC off and booted it up, and I get this same black screen issue. Weird thing is, if I do the same method of holding the power button down and stuff, it boots up fine to the login menu and desktop.
What I've read or something, I should remove the CMOS battery or something, or upgrade the BIOS, etc.
I just upgraded to Windows 10 from Windows 7. My wife and I use the same computer at home and each have a user account.
On Windows 7, when the computer started, the first screen we would see is both user accounts and select the appropriate one. Windows 10 (as many of you already know) seems to go directly to the user account that was on at shutdown. Is there any setting I could make to offer the choice of both user accounts each time on boot up?
These are my PC Specs:
CPU: 5960X
Mobo: ASUS RAMPAGE V EXTREME
GPU: GTX 980
RAM: 16GB 2800 XMP
I booted up my PC and not only did it not display the BIOS, but the post beep did not sound. I hear another beep normally, but I think that's related to an overclocking error when applying the XMP profile for my RAM. When my computer gets into Windows 10, my resolution is a 640x480 and it doesn't display my GPU, instead it displays a mobile PC display. How did this happen? I have a 27" monitor at 60 hz. It literally changed overnight, and I can't seem to find System Restore. I don't think I'm automatically booted into safe mode.
Whenever I shut down my computer, I always have this problem. The Windows 10 insignia and the loading circle beneath will appear, then the screen will fade to black, and then my monitor says it can't detect my computer. I then have to unplug my computer from the outlet because I can't shut it down by pressing the power button. When I start it up again afterwards, it will start perfectly fine. And whenever I try to change the boot configurations, it automatically resets itself to the previous version.
View 9 RepliesI followed this guide and rebooted but I still get the login screen where I have to enter a password before logging in to Windows 10.
View 1 RepliesIt seems Microsoft has eliminated a feature I once used prolifically: Hardware Profiles. Windows-10 does have a "hardware profile", but it is nothing like what was in XP (or in Win-7, as I understand it). I want to know if there is an alternative in Windows-10 that allows me to control which Services are enabled or disabled from one session to the next, based on the currently selected profile (XP also had User Profile, but that's a different beast, and that still seems to exist in Win-10).
In the older O/S'es (XP, 2ooo, and NT for sure), you could set up multiple "hardware profiles" (silly name because it related as much to controlling Services as it did to controlling Devices). You give each profile a name, and set which one is the default startup if you let the screen time out. This is like the timeout in a multi-boot menu, and it's a menu that comes up right after the O/S menu if you are multi-booted. If you're single boot, it comes up at that same moment in the boot process.
Then, in the properties dialog for an individual Service, in the Logon tab (if I recall correctly, or maybe it was a "Startup" tab), those profile names you made will show up as a list allowing you to set enable at bootup or disable at bootup for each profile in that list.
I've just started using Virtual Desktops on my Windows 10 Pro Laptop & wondered if the layout(s) of apps was preserver through power cycles (Reboots/shutdown & startup, or if they require setting up after each bootup?
View 2 Replieswin10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
View 2 RepliesSo this started like last week where i get these small lags when my pc freezes for like 1-3 seconds. It can happen when i play games or just browsing. It happens probably like 2 times every hour. This is a problem for me because when i play csgo and im shooting towards someone and everything just lags and i die. It's a small problem but it is really frustrating. And just today while i was playing Arma 3 my pc completely froze and i had to restart it by holding down the button on the case.
Specs:
Nvidia gtx 760 2gb
i5-4460 3.2 GHz
Seagate SSHD 1TB
500W Corsair
This is a problem that has been plaguing me across years and several computers.Every hour or so, and it doesn't seem to matter what application I have open, Windows will become unresponsive for a few seconds. Then it will go away.
On this system I have 8 gb ram and I am running light applications. I have a new i-5 skylake processor and a good asus mobo. And a reputable SSD, too. I just installed windows 10 pro x64 a week ago. I have this problem even without third-party AV, as I found out after I uninstalled my AV.
my computer has been acting strange as of 2 days ago. I was initially just browsing the net and everything stopped loading. I thought my internet went out and I shut down my computer thinking nothing of it. I tried starting it up again later that day but it would freeze a few seconds after I log in.
The strange this is, it works for about 5-10 s then my pointer changes to that spinning blue wheel and everything becomes unresponsive. I can't click anything or use my keyboard, but I can still move the pointer. Here are some of the things I've tried:
Restart in safe mode (same type of crashing occurs, can move mouse but can't do anything else)Restart in safe mode with command prompt to run sfc /scannow. (initial attempt froze at 100%, hard rebooted and tried again but now it freezes at the file verification stage)"Reset this PC", ( froze at 8%)