BSOD :: Acer Aspire 5250 - Kernel Auto Boost Lock With Raised IRQL
Oct 3, 2015
So, I was chatting with Microsoft about an issue with OneDrive, and all of a sudden my computer crashes. The error says "KERNEL AUTO BOOST LOCK WITH RAISED IRQL". I have included the dump log in this thread.
The computer is a Acer Aspire E15 with 4gb RAM and Amd E2 Chip. It was originally running Windows 8.1 but I recently updated to windows 10 and I got the Irql not less or equal bsod. I can't access anything because it just goes back to the bsod.
I have an Acer Aspire 7750g laptop for like 5 years now. Updating it's graphics card would result in having lines randomly flicker all over the screen horizontally. This is the reason I did not update it's drivers. Now that Windows 10 has released, it seems to have update it automatically which is irritating. I've searched in the internet some ways to fix it and tried one of them: Underclock the Memory Clock by 50 MHz in MSI Afterburner. This did not work at all. What I have done is I have underclocked the Core Clock by 50 MHz aswell and still no result. I've kept these two that way and restarted my laptop to hope that this might fix it, I was wrong. Now I can't even boot into windows. This is what I get when I try to boot into Windows: [URL]
I have tried going into safe mode and that's where I get the BSOD that says Kernel_Data_Inpage_Error. I have also enabled the low-resolution video mode, still no result.What I could do is reinstall the operating system but I'd like to keep that as my last option as I do not want to lose my files and I don't know if my windows 7 key will be accepted while installing windows 10 from a flashdrive.
Acer Aspire 5943G upgraded from Win 7 to 10, Kaspersky 2015.
After tolerating a couple of glitches (track pad not scrolling, right speaker down, tiles at start menu not displayed, some icons not visable on task bar) I can now not boot up. The windows 10 logo appears with a rotating 'we'll get there sometime' device for a short while, after which the screen flickers black then grey/blue. It does not reach sign in, there is no cursor and it stays this way, although it will shut down ready for me to try again. I have tried hitting F8 during this but with no effect. F2 brings up set up, but how I can get back in to it?
Acer Aspire XC-603 computer came with Windows 8.1 ... Upgraded to Windows 10 Home around March 1, 2016 Version 1511 OS Build 10586.164 ... First crash came the next day after the upgrade, then around every two weeks.
For the past few months, the right touchpad button does not work with the Windows 10 drivers. Windows 8.1 drivers worked fine. If I switch mouse settings to left handed, then the buttons work fine, but obviously this is awkward to get used to. I have rollbacked the driver to a very old edition and it worked fine, however then I had no synaptics touchpad settings so the touchpad settings could not be altered.
I have a problem with my Acer Aspire 5943G. I just upgraded from Windows 7 Home Premium OA to Windows 10 Home, and then updated Windows 10 until there were no updates showing. A couple problems appeared which I was able to fix but not a particular one; When I startup the laptop it all goes smoothly but when it gets to the login screen (clock with the background), my screen's backlight suddenly turns off.
I can still see the faint screen info if I shine a bright light in it. If I restart it, it fixes the problem though. This is rather frustrating as I cannot expect when it will happen (right now it happened when I turned it on from hibernation, sometimes it happens with a normal shutdown and startup). My GPU is ATI mobility radeon HD 5650. Also having a sound issue. I can get the sound to work through headphones, but not through the speakers.
I have an Acer Aspire laptop that used to have Bluetooth on it. I just recently noticed that all evidence of Bluetooth has disappeared from the OS. The Bluetooth module that I am using is:
Bluetooth 4.0 + HS, the two drivers listed on the support portal for my model number are an Atheros Wifi/BT combo and a Broadcom. I can't tell since there since the OS doesn't see it.
First thing I tried is to download and install both drivers from the manufacture's site (Acer Support). Both installers did not detect the BT module being present and ended prematurely.
I've got a problem with my second laptop, acer aspire e15-551P. After I upgraded my windows to 10, voice totally disappeared also sound card cannot be found. Already downloaded and installed all available drivers from acer site. Still doesn't work.
run down of errors when i try to do automatic repair:
1.Troubleshoot>Reset this PC>Keep my files> = error: The drive where Windows is installed is locked. Unlock the drive and try again.
2.Troubleshoot>Reset this PC>Removes everything>= error:Unable to reset your PC. A required drive partition is missing.
3.Troubleshoot>Advance options>System restore>= error: System restore: To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore.
4. Troubleshoot>System Image Recovery>= error:Windows cannot find a system image on this computer. Attach the backup hard disk or insert the final DVD from a backup set and click retry. Alternatively close this dialog for more options.
5.Troubleshoot>Startup repair>= error: start up repair couldn't repair PC. Press advance to try other options to repair you PC or "shutdown" to turn off your PC. Log file:
6.Troubleshoot>Go back to the previous build>= Windows ran into a problem and wont be able to take you back to the previous build. Try resetting your current build instead(Troubleshoot > Reset this PC).
7. Install>Upgrade>Compatibility report: The computer started using the Windows installation media. Remove the installation media and restart your computer so that windows stars normally. Then, insert the installation media and restart the upgrade.
8.Install>Custom> We couldnt find any drivers. To get a storage driver, click load driver
when trying to load the USB it says no signed drivers were found. Make sure that the installation media contains the correct drivers, and then click OK
I just want to get my laptop running at this point and probably go back to windows 7. dont mind losing my files cus most were backed up
I have installed intel's driver detection tool and it informed me that I have a custom driver installed by the manufacturer. Acer site scanned my pc and found new driver VGA 10.18.15.4248, which i downloaded but upon installation tells me is the wrong driver for my pc. I have upgraded(haha) from win8.1 to 10, not sure if this is part of the problem. This driver was released 7/15. I ran windows driver updater and it tells me the driver I have, the only one btw, is current. I have tried to contact both Acer and Intel and get no answers.
Whenever I connect my acer aspire v5 572 running win 10 connects to external media like printer or mobile .. It freezes and show me page fault in non paged area ..
I have an acer aspire v5 573g. I wanted to clean install Windows 10 on it. And every time I tried it gave me an error code : 0x800701E3. I thought it might be due corrupt instalation file or something. I tried other copies but it gives same error. I don't know what it means. I tried searching on the net, but I didn't find anything. I will also attach a photo which I took.
I've been having this problem for a while now, random BSODs giving the IRQL not less or equal message. It happens at random times, and doesn't seem to be tied to any particular action.
Below is a Dropbox link to the minidumps from today. I use this machine to run my plex server and marketing software. I keep getting BSOD and cant seem to isolate the problem. A few of them seem to be related to Kaspersky.
I run high bandwidth intense programs with a bunch of threads (5,000+).
They system has 2 xenon e5506 with 32gb ram, CPU usage can sometimes hit the 100% mark for a few minutes but typical is stable around 60%. I recently downloaded and updated all drives/bios. I'm not sure if its too much processing at once that is causing the crashes, or if its a driver issues. Error I always get is IRQL related.
Crash Dump Analysis provided by OSR Open Systems Resources, Inc. [URL] ....
I've upgraded to Windows 10 about two weeks ago and it's been going smoothly until I've gotten three BSOD in the span of less than 12 hours. I'll include the Dump files here too ....
Sometimes I get the BSOD saying irql not less or equal. Sometimes I can restart it and it will boot normal. Sometimes it takes 20 times of restarting to finally go through. Not sure why it is happening but its not all the time and might go a month or two without it happening.
I have attached the debug.
i5 processor 16 GB Ram Windows 10 OS 64 bit AMD R9 290 Graphics Card
Brand new Alienware 17 R3 and I get this BSOD probably 70% of the time on system start, restart, or awake from sleep. It only occurs once, after it has occurred it will never happen a second time in a row. All it says is the whole "IRQL Not Less OR Equal" thing, then reboots. I have followed the instructions in the sticky and attached the corresponding zip file.
I have already updated several things from the Dell site directly after trying some google research on the subject. In the last 24 hours I have updated the BIOS, sound drivers, touchpad drivers, video drivers (both onboard and for the 980M.) I also updated the wifi and LAN drivers from the Dell support site about a week ago shortly after getting the machine.
I have recently upgrading to windows 10 on a fairly new machine, after doing so I have had regular BSOD (IRQL unexpected error), there doesn't seem to be much connection between them other than watching videos whilst online. When I got the first one I read a bug fix online which said to fix it either revert back to my previous OS (windows 8) or reinstall windows 10. I did the later thinking I could always revert back if that didn't work but alas it has now gotten rid of that option and the problem still persisted. I downloaded bluescreen view to work out that it was a problem with nwifi.sys driver, and so updated my wifi driver accordingly but the problem still persists.
I hopefully have attached the associated info dump.
Personalization Lock Screen Screen Time-out settings Screen: when plugged in, turn off after 5 minutes Sleep: When plugged in, pc goes to sleep after 10 minutes