I am using Dell inspiron laptop (pretty old one) which started acting weirdly. Upon examining, there was a problem with HDD so I had it changed.
As soon as I got new HDD installed and installed Windows 10 on it, computer started acting weird again - slow startups, random freeze etc.- but it was running ok and I was fine with it. But earlier today, it suddenly displayed BSOD and crashed when it was idle. Now to the main and the funny part, it does not boot anymore. To elaborate, blank screen appears after BIOS screen (right when the logo of windows should be displayed) and it remains blank for several more minutes before the logo and spinning dots magically appear, it doesnt disappear thereafter.
I figured, I could run startup repair or some other tool to solve the problem by booting from the DVD of windows 10. Now for this one, the logo appears with the spinning dots which disappears after a while like it should. And after it disappears, blank screen persists thereafter. Dumbfounded, I tried booting from a USB stick of Windows 8 I had which gave the same problem.
I have already tried altering most of the options in BIOS and the diagnostic tool gives and all-ok for all the installed hardware.
I am using Dell inspiron laptop (pretty old one) which started acting weirdly. Upon examining, there was a problem with HDD so I had it changed.
As soon as I got new HDD installed and installed Windows 10 on it, computer started acting weird again - slow startups, random freeze etc.- but it was running ok and I was fine with it. But earlier today, it suddenly displayed BSOD and crashed when it was idle. Now to the main and the funny part, it does not boot anymore. To elaborate, blank screen appears after BIOS screen (right when the logo of windows should be displayed) and it remains blank for several more minutes before the logo and spinning dots magically appear, it doesnt disappear thereafter.
I figured, I could run startup repair or some other tool to solve the problem by booting from the DVD of windows 10. Now for this one, the logo appears with the spinning dots which disappears after a while like it should. And after it disappears, blank screen persists thereafter. Dumbfounded, I tried booting from a USB stick of Windows 8 I had which gave the same problem.
BSOD happens only when the computer cold boots from a prolonged inactive state. If the PC is off for several hours and is turned on it occurs. Computer typically blue screens, sometimes it freezes at the bios splash screen where they Windows 10 circular loading icon appears on this Gigabyte. I've seen multiple reasons for the occurrence such as bad pooler caller and irql not less or equal. The BSOD happens once then after the computer functions as normal with no other issues.
Power supply, graphics card, and SSD were both pulled from a previous build with zero issues in that build. New to this build is the motherboard, processor, and RAM.
Ran Memtest86 with no errors for 8 passes but I just realized it was after the initial cold boot BSOD and not going from the inactive state to the test directly. Will be swapping out the RAM at Microcenter today just to eliminate that possibility.
Windows 10 was a clean install but it happened on the previous install, BIOS is flashed to the most recent release.
I upgraded my laptop from Windows 7 to Windows 10 recently. About 90% of boots, my laptop will hang a and produce a BSOD. Initially, the BSODs were typically "system thread exception not handled" and "pfn list corrupt".
However, after the latest Win 10 update last week, initially everything went well, there were no boot hangs for awhile until a few days ago when it keeps on BSODing on boot with the error "Inaccessible boot device". The subsequent restart would end up with a BSOD of "system thread exception not handled". It works only after multiple restarts, which is worrying.
Recently upgraded to Windows 10. Everything seemed to go well. It was working fine I restarted a couple times and it all went well . I shut the computer down for about 20 minutes and when I tried to restart it I get nothing on the monitor. I can hear the hard drive start but monitor doesn't come on unless I hit the power button on the monitor and even when I do it just comes on for a few seconds and it is blank and it says monitor is going to sleep and shuts off again and if I hit the power button again it will just repeat the cycle.
In the first week or so, Windows performed quite smoothly (albeit with some slowdown playing games) and was for the most part perfect.
However, quite recently my experience with Windows 10 has been so poor that I am regularly unable to even boot up my PC - being greeted by an alarming 'beep' sound, followed by an immediate shutdown. In the rare circumstance where my computer actually does turn on properly, whenever I open Chrome or Edge it shortly freezes and I'm forced to hard reset my computer.
I have tried reinstalling Windows 10 (deleting most of my files with it) but to no avail. I have noticed that on the task manager the 'Disk' column is quite often red with 99% usage -
I have win 10 pro installed on a Samsung 850 pro SSD. In Bios it lists Windows Boot Manager as the #1 option. I selected Samsung ssd as my #1 option, saved and exited. Computer will not boot. Says No OS found-insert media and restart. Did that a couple times. No Boot. Set Bios back to Windows Boot Manager. Everything runs fine. Also Sata controller set to AHCI. Is this normal for Windows 10? In Device manager my storage controller says Microsoft storage space controller.
So, i am going back to Windows 7 so i have my disc and key. But how to start my computer from the CD drive with windows 10. With Windows 7, there was a key(like F2 or F12) to change boot device. that is not there with Windows 10. So how do i boot my computer from the CD Drive?
I've been trying to fix this for a while, but I have had no luck. My sister for her birthday got a new laptop (Dell Latitude E6420 Intel i5 2540m at 2.6 ghz). I did the free Windows 10 upgrade for her, and when the computer is starting from a shut down, it goes to a black screen with the mouse, and the mouse is frozen. There is nothing I can do but hold down the power button to shut it down.
After upgrading to Windows 10 everything was going smooth, until few days ago I noticed that the sleep function is not working properly. After asked to sleep the computer will boot from scratch and all the unsaved data is lost. My computer is ASUS K551LN, Intel i7 4500U processor, nvidia geForce 840m graphics. I tried clean install does not work, all drivers are updated, also tried disabling hibernation and fast reboot...
I have had nothing but issues, since upgrading to Windows 10 from Windows 8 (64). The installation within of itself was horrible. I got the continual flash on the screen, until I was able to get it into safe mode and recovered it. Then made sure drivers were updated. However, I did not upgrade my BIOs, from the information I had seen from MSFT. Didn't think twice, since they said if you were upgrading from 8 or 8.1 that should not be an issue. The system was running stable, after I did those fixes.
About 1 week ago, after a MSFT Windows automatic patch push, My monitor started not to respond during boot up. Ran some basic troubleshooting for the monitor (Ie: check plugs, check cables, check Video card). They all seemed to work fine and my system booted up normal.
The very next day, cold booted again and monitor did same thing, it was not getting any signal from the computer. Went through the checks, after a little bit of a delay the system finally booted. I checked my BIOs settings, which were all set up normally. I locked my computer after that and did not turn off the system, the next morning, my monitor was unresponsive.
I re-checked monitor, cables and even replaced the video card. Everything is good except no signal to my monitor. I disconnected all hardware except the video card and motherboard, to see if it was an issue with my power. I took out out the CMOS battery and also disconnected power to the motherboard for about 2 hours, to try and reset the BIOs to factory. No luck.
This leaves me with 2 things left:
a) Corrupted BIOs, not loading my drivers, or b) motherboard went bad.
Have just bought a new computer (Acer E1 572 with I7-4500U processor, running Windows 8.1). Tried to download Windows 10 and at the end of the process the computer shut down and now refuses to restart. When I press the start button the small blue light on the front of the computer flashes 5 times - and that's it. I am not very technically savvy (understatement) and if I had made even a quick glance at this forum and realised that there were so many problems with Windows 10 I would have stayed with Windows 8.1, at least untiI most of the initial bugs were taken care of. What can I do to get my shiny new computer back and running on Windows 8.1?
I restarted Windows 10, and it started installing updates. The computer restarted a couple times saying it was installing updates, and eventually it said that there was a problem installing the updates, and that it was reverting changes. It hung on this is screen for about five minutes, and then (my arm touched the keyboard in this instant, not sure if any buttons were pressed) I got a blue screen, with the error code disappearing too fast for me to read and remember it. Now when my computer attempts to start up, it shows the gigabyte 3d bios splash screen, goes to a black screen with a command prompt-esque cursor blinking, maybe five or so lines from the top. At this point it seems the only input it will accept is ctrl-alt-del, which restarts it and leads to the same outcome.
I had updated to Windows10 a couple weeks ago. Everything was running smoothly until my most recent NVidia gfx driver update. It seemed to stall at 99% completion and then I lost the sound to my computer.
After numerous attempts to fix my sound I decided to just restore my computer and wipe it clean. Big mistake.
Again upon 99% completion of the restore process my computer crashed and then entered an infinite loop and booting and loading to a screen that would say "innaccessable boot driver".
This seems to be a common problem with windows10 and people who restored or wiped their computer, they all got the same error message I did. Except the fixes that have worked for them aren't working for me.
I have even purchased a fresh copy of windows 8 and a new SSD in attempt to remedy this but to no avail. Even after removing my other SSD's and keeping only the new one in, it now loads to a screen that says "reboot and select proper boot device, or insert boot media in selected boot device and press a key".
I have tried messing around in the bios but nothing I do seems to work.
I have a MSI g45 z87 gaming mobo Gtx780 Kingston ssd
I am using Dell inspiron laptop (pretty old one) which started acting weirdly. Upon examining, there was a problem with HDD so I had it changed.
As soon as I got new HDD installed and installed Windows 10 on it, computer started acting weird again - slow startups, random freeze etc.- but it was running ok and I was fine with it. But earlier today, it suddenly displayed BSOD and crashed when it was idle. Now to the main and the funny part, it does not boot anymore. To elaborate, blank screen appears after BIOS screen (right when the logo of windows should be displayed) and it remains blank for several more minutes before the logo and spinning dots magically appear, it doesnt disappear thereafter.
I figured, I could run startup repair or some other tool to solve the problem by booting from the DVD of windows 10. Now for this one, the logo appears with the spinning dots which disappears after a while like it should. And after it disappears, blank screen persists thereafter. Dumbfounded, I tried booting from a USB stick of Windows 8 I had which gave the same problem.
Whenever I let my computer idle for more than 10 minutes I get a BSOD with either MEMORY_MANAGEMENT or SYSTEM_SERVICE_EXCEPTION.DESKTOP-3FK3RKN-Mon_01_18_2016_204122_93.zip
So my computer has been kinda laggy and running slowly so I figured I would do a clean reset of Windows 10. It noted that it would take hours, which was fine. However about an hour into it, it said there was an error resetting. It then restarted the computer however I can't get passed the "ASUS" start up logo. It goes black and then loops. I hit F9 but none of the options work for me - automatic repair won't work because it says my computer doesn't have an administrator and when I try to reset again from there, it tells me that "a required drive partition is missing." I don't have the greatest knowledge on computers, so I really don't even know what that means.
I've read that I might have to reboot from a USB - how would I go upon doing that? Is there something I can download on the Microsoft website? I don't have a key because the computer came pre-loaded with Windows 8 and I upgraded to Windows 10 for free last year. Will I still be able to boot from a USB?
Alright so, i installed windows 10 had it working for about a week my graphics card was away for repair and when i finally got it back i tried installing it only to discover my PCI slot on my mobo was bad. So i ordered a new mobo when i got the new mobo in the mail i installed and powered on my system the usb drivers were working fine. I still popped in the install CD for audio drivers about mid install of the drivers i leave the room and come back to discover windows 10 had reset itself and was installing "updates" at about 55% it completely froze i left it alone for about an hour before I rebooted.
Upon rebooting i discovered none of my usb ports work it appears the driver install got eliminated mid installation. So my pc was just stuck there on the new annoying mandatory log in page Luckily my Mobo had a ps/2 slot so i had to travel all around town to thrift shops and pawn shops to find a ps/2 keyboard, success i got the keyboard and j signed in! Time to pop in the drivers CD and reaccomplish it! Only one thing... Windows says "failed to install update"*instant reboot* by the way my only internet access on this PC is a wireless usb dongle
Recently I downloaded a program but it came with a ton of malware. I booted my laptop in safe mode and ran a bunch of malware removal programs. When I tried to boot my computer back up, the screen lit up and turned grey.
I was browsing the internet, my computer suddenly began to freeze up and run extremely slow. After roughly 5 minutes of that, I was met with a black screen and really no other choice than to hold down the power button and force a shut down on the computer. Upon the computer booting back up, I see a Windows 10 logo and a small circular loading graphic that's spinning as if its loading. This happens for a few minutes until an error message appears "Unmountable_Boot_volume" and the PC automatically restarts itself.
On the second reboot, I see the same Windows 10 logo but instead of a loading bar, its just text indicating the computer will now try to automatically repair itself. This is when the computer takes me to the "Choose your keyboard layout" screen on what I assume to be the repair interface. The problem is that my keyboard/mouse are not recognized or working at this stage, so I'm unable to select an option and progress. I've read that there are some possibilities at a fix or way to get the keyboard to function through the use of the BIOS menu, however any attempts to press "Esc" on my keyboard or any of the other functions such as "F10" for a boot menu results in an instant freeze of my PC.
I'm running Windows 10 on an HP Pavilion P6000 series. I've already done my own research as to what could be causing this and have tried a few things such as manually resetting the CMOS, reseating pieces of hardware, only plugging in essential cords (Keyboard, Monitor, and Power cable). and disconnecting the power to the Motherboard and reconnecting it.
My computer froze during a Windows update, and I had to force a shut down, which really messed up my computer.
My computer was stuck in a boot loop, so I attempted to reinstall windows 10 onto it. At around 3% it crashed again, and since then has been really messed up.
If it tries to boot normally, it no longer gets stuck in a boot loop, but now just instantly crashes to blue screen, saying a required device can't be accessed (error 0xc000000f).
I tried to boot into the windows 10 install disk to try and run chkdsk or attempt other recovery tasks, but it crashes after a few seconds of being on the menu, saying to search for FAT FILE SYSTEM to try and fix the error.
I downloaded gparted onto a USB and ran it. It gave me this error: [URL]
Last night I accidentally hit 'hibernate' and as i was in a rush i held the power button. Low and behold i woke up this morning went to put it on and got to the BSOD. I basically get to the login screen, login and then it repeats. Ive had the BSOD before but it just restarted and everything was fine. Now I'm trying to turn the pc on and its stuck in a reboot cycle, doesn't get to the login screen. I've literally tried everything, the PC won't even reset or anything. Genuinely stuck....
I've gotten the BOSD 7 times today. The BOSD said it was because of various things throughout the day, at first it said it was Memory Management, but after that I just started to get annoyed.
Checking back through the event logs, the bugcheck says the errors were: 0x00000050; 0x000000ef ; 0x0000001a; 0x0000000a; 0x00000139; 0x000000c1
If it isn't obvious, I really don't know how to solve this or if the bugcheck errors useful at all. What I do know is that I was just using google chrome when some of the crashes happened. Also during the day, several times I booted up my computer and logged in and then went away for 5 minutes after logging in (without doing anything). When I came back, it was obvious that my computer had restarted.