BSOD :: Constant Blue Screen Error And Restarting Loop
Feb 10, 2016
I recently purchased an intel NUC6i5SYH kit PC and fitted it with the following RAM and HDD.
Samsung 500GB 850 EVO M.2 SSD: Amazon.co.uk: Computers Accessories
HyperX Impact 16 GB 2133 MHz DDR4 SODIMM Memory Kit (2 x 8 GB): Amazon.co.uk: Computers Accessories
I installed a copy of windows 8 that I owned and then upgraded it to windows 10. It was working fine for a couple of weeks, and suddenly it had and error and is stuck rebooting itself with a blue screen error.
The error appears to be different every time but the ones I have seen repeated are "WHEA_UNCORRECTABLE_ERROR" and "MACHINE_CHECK_EXCEPTION".
I can get into the BIOS and that's about it. I can't find a way to boot into safe mode and when I try and install a fresh copy of windows 10 via USB created from microsoft i still get a blue screen error after a couple of seconds.
View 1 Replies
Similar Messages:
Feb 28, 2016
On start up I get the computer needs to restart and then goes into the loop of restarting from a blue screen, I can get F2 which is the Bios screen but thats all, I can see reboot on this but do not have anything to reboot with as I upgraded from win 7.
View 4 Replies
Aug 12, 2015
Valid windows 7, sit back and relax message on the install, then blue screen of death and error loop, No support from Microsoft. Off to local computer store to see if they can get this fixed or off of my PC..... way to go Bill - no wonder the upgrade was free.
View 1 Replies
Aug 11, 2015
Last night I was watching a dvd on my desktop when all of a sudden a blue screen came up with a frowning face and said that "Your computer ran into a problem and needs to restart, its collecting info and will restart." It happened quickly so I didn't see what the error was but now my PC is stuck in a loop where it restarts and loads into an empty blue screen. It stays on that blue screen for a minute or so and then restarts again. I tried going into my BIOS or starting in safe mode but my PC won't go into them.
View 9 Replies
Jul 11, 2015
yesterday i updated windows to latest preview.. install got struck in the middle and then after few hours it suddenly completed.
then it asked to restart as usual, but didnt complete the process. it went to blue screen.
now it only restarting to bluescreen only i plugged in.. no response.. cant even hard reset.
View 1 Replies
Aug 12, 2015
This is happening sice i installed windows 10.On windows 8.1 this was not happening.
Every time when i try to update a game,and install something my laptop restarts and it saying "Page fault in nonpaged area"
I know how to fix it.Only instaling and updating games from Steam works.
View 1 Replies
Dec 7, 2015
Beginning from Saturday while playing with crashes and freezes I might have fixed my driver problems, but upon booting up my PC the next day, I was receiving constant Memory_Management BSOD errors every 20 minutes to 1 hour when trying to play Fallout 4 for example.
When I came back from work today just a hour ago, I also received the same BSOD when I logged in, but later it just worked fine and proceeded to desktop. Weird.
Oh, and here's the rar file I was supposed to upload when reading through posting instructions.
View 1 Replies
Sep 28, 2015
I get these random critical process died BSOD when I'm doing random things -- watching a movie or playing a video game. It happens during internet browsing as well.
View 5 Replies
Sep 29, 2015
I've been using Windows 10 for few weeks now and it's been really good.
8GB Ram
1 TB Hard Disc
Asus Motherboard
i5 processor
Used the PC as I would normally do and shut it down last night. Recently installed the latest update for Win 10 as I recall. Otherwise no new changes or installation to the system.
So now when I switched it on its showing Automatic Startup Repair and it diagnose the PC but fails every time and shows a blue screen of startup repair where I can:-
- reset PC (reinstall but this fails at 36%)
- system restore or image restore ( but can't use either)
- startup repair (doesn't work either)
- command prompt (tried sfc/scannow and they won't allow me to do so unless I restart but keeps getting same error.
Tried unplugging the hard disc etc but same old loop again.
View 1 Replies
Feb 15, 2016
I woke up this morning to a constant boot loop into blue screen that gives me a memory_management blue screen error and restarts then occasionally gives me a driver_corrupted_expool blue screen.
It tries to start up automatic system repair which fails and works very rarely. Once i am in the system repair screen i try the startup repair and it just doesn't do anything and redirects me back to the blue screen boot loop. I had restarted my PC this morning after it was working and then it just randomly started doing this boot loop.
I need fixing my issue with a bootable USB program i can use to fix the drivers or something. I need every other option other than reinstalling windows because i have tons of files i need on here.
View 16 Replies
Aug 27, 2015
I've upgraded to windows 10 on release and have been away on holiday for the past 2 weeks. Today I come back to find explorer.exe keeps restarting about once every 2 mins and is causing full screen games to minimise and change the computer focus.
View 1 Replies
Sep 7, 2015
Installed the latest video driver rebooted fine. Checked again for Windows updates. Found 2 critical updates. Installed rebooted, and has not stopped rebooting. The pc never shows anything on screen or gets to a place I can boot from disk. Switched HDs to go back to win7 but still the same. Cannot get anything on screen. Just constant boot.
View 5 Replies
Mar 5, 2016
Booting loop, shutting down before you can reach the bios. Originally a response on this topic: [URL] .....
I have the same Problem here with my gigabyte z97 hd3 v2 motherboard in my PC. I had this problem one time before, then I tested everything 'literately everything' and I was done with it after a week of testing. I did put everything together and turned it on.... It Worked ! but how ??? I don't know.
[URL] ....
View 1 Replies
Dec 6, 2015
After restarting windows 10 its only reach the first log-in screen without curser and I can't get further.
View 4 Replies
Aug 14, 2015
So i needed to factory reset my new desktop for reasons unneeded and overnight my parents switched it off and now its on a constant loop landing on "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system. Press Ctrl+Alt+Del to restart" and loops again.
I made a USB Drive containing Windows 10 and it'll go to the install screen but when i do try to install it it will tell me to restart my computer and try again. Going to the repair area, trying to reset it, it will tell me both "The drive where Windows is installed is locked. Unlock the drive and try again" (when keeping files) and "Unable to reset your PC. A required drive partition is missing" (When removing everything). I have no system restore point since its new either and startup repair finds nothing.
View 1 Replies
Nov 24, 2015
Blue screen and error 0xc000021a and the continuous repair loop
DESKTOP-9LUS32E-Mon_11_23_2015_225843_17.zip
systeminfo.txt
View 9 Replies
Aug 13, 2015
I recently upgraded to Windows 10 without a problem, but after a while I thought; why not do a clean install? I went ahead and tried to perform a clean install from the windows 10 settings, and chose all drives, and a quick reset.
It then started the process, after which it crashed with a BSOD telling me something went wrong and that it would restart. After that it kept restarting, sometimes with a BSOD, sometimes just freezing on the windows 10 logo. There were different BSOD errors each time it would crash, I can't remember all of them.
Some of them were along the lines of a driver stack overrun, some were telling me system32/winload didn't exist.
We tried a system restore from USB, but there was no difference. We tried going into the BIOS menu, sometimes it worked, sometimes it froze, and we made sure that the USB would be the first the PC would boot from. Still no difference.
At this point the PC just froze on the windows logo, still trying to initialize the system reset I think. I unplugged the drives and plugged them into my laptop to check what was wrong, and both drives were wiped, with nothing left, no hidden files.
Only with both drives unplugged, the PC would give me something different, an error saying that there is no operating system, which is obvious, so I don't think it's the PC, but windows that is generating this problem.
I tried booting from USB multiple times, with a system restore on it, a windows 10 installation on it, and a windows 8.1 installation on it, since that is what my PC started with.
View 3 Replies
Oct 23, 2015
I'm experiencing constant blue screens on my new windows 10 pc.
The error says "KERNEL_AUTO_BOOST_LOCK_ACQUISITION_WITH_IRQL" and it keeps crashing every time i try to switch on.
View 1 Replies
Jul 30, 2015
So I decided to upgrade my Windows 8.1 Lenovo G510 to Windows 10 yesterday. Bottom line: everything went wrong.
1. I got the notification that Windows 10 was downloaded and ready to be installed to my Windows 8.1 (64) system. So I did and everything went successfully until my system restarted. I kept getting the error "INTERNAL_POWER_ERROR" and restart loop. The laptop will start with the Lenovo logo and the loading dial, then the error pops up. After a few loops it gives me the option to tinker with the command prompt, recovery, etc.
2. So I went online and people were saying how Windows 10 conflicts with AMD graphics. What worked for most people was disabling their AMD in safe mode. I tried to entering safe mode through F8 (fn+F8) for my Lenovo laptop and nothing was working. I searched online and people were saying I can change my bcdedit to startup in safe mode everytime. So I went into the command prompt and typed in bcdedit /set {default} safeboot network. I restarted and everything went SOUTH! A new sequence of looping began: 1. Lenovo logo appears with loading dial, fades to black, logo and dial reappears then disappears as the system shuts down and the cycle loops. Sometimes before the second logo and dial disappear, the text 'Restarting' appears very quickly under the loading dial. Sometimes the text 'Safe Mode' in all 4 corners appears for less than .5 second before the system shuts down.
3. At this point there's nothing I can do but enter the InsyndeH20 Setup Utility through F2. Please visit this link for pictures of my settings and laptop specs. [URL] .....
I decided to try the USB boot with Windows 10 MediaCreationTool on a USB and the install interface showed up when I reboot. From here I could access the repair options and open command compt again, but I can't revert the bcdedit back to normal. It says "The boot configuration data store could not be opened. The requested system device cannot be found" when I type bcdedit /enum. View here: [URL] ....
4. At this point, I'm okay with wiping everything and starting fresh. I would like to keep my files but I was over it. However, it says that Windows cannot be installed on any of my drives! Only allows for Delete and Formating, the New button is gray. All of them say Windows cannot be installed to this hard disk space. I know that the laptop I copied the MediaCreationTool is a 32bit and my Lenovo laptop is a 64bit. Is it possible that is the reason why I can't install windows? When I try to run the MediaCreationToolx64 on my backup, a 'This version of this file is not compatible with the version of Windows you're running'.
View 1 Replies
Dec 16, 2015
builded 2 weeks ago my PC but having problems of BSOD or Black Screen with Sound Loop (no signal).
OS: Win 10 pro x64
CPU: i5 6500 3.2ghz
MOBO: Asus H170m-PLUS
RAM: Corsair 1x8GB DDR4 2133MHz (before 2x4)
GPU: Sapphire r9 380 4gb NITRO
SSD: Samsung 850 EVO 250GB
[code]....
Here it's my log. The last BSOD i had was KERNEL_SECURITY_CHECK_FAILURE after putting the 1x 4gb in the B2 ram module.Before i used the pc all the day without problems except 2 times i had a Black Screen with Sound Loop while Playing.I tested the last week an HD 5700 and i hadn't Black Screen but i had Blue Screens, now testing again the HD5700.
View 9 Replies
Jul 31, 2015
just recently i installed windows 10 (clean install) on my built desktop. At first it was fine installing programs etc. Then not sure what i installed last or what happened during an installation but now when i try to install a program like Nivida Graphics Card Driver the blue screen error comes up. It never fails, even if i try and install skype it also causes the problem. I originally had the Nvidia G experience installed but i read online that this might be causing the problem so i uninstalled successfully but it is still happening.
View 1 Replies
Oct 15, 2015
I installed windows 10 I had already 5 blue screen with errors saying KERNEL-SECURITY-CHECK-FAILURE. find the source of the problem..
View 1 Replies
Dec 30, 2015
ive been constantly experiencing bsod crashes. Ive attached the DM log collector file
MSI-2015-12-29_204642,07.zip
View 4 Replies
Jan 14, 2016
I had a computer man in to install Windows 10 and remove Windows 7 and I wish I had never done it. I can be writing away and then all of a sudden it freezes and comes up with a couple of pop ups before waking up again. Occasionally the computer freezes solid and I have to manually switch it off. I have the computer man coming again tomorrow which will cost me more money but I'm getting close to just giving up and buying an Apple.
View 19 Replies
Aug 14, 2015
It has happened twice since I installed windows 10 in the last two weeks.
I have the default blue desktop in 10 and I also have a rather old ATI Radeoon HD 4600 graphics card, though the driver date in device manager is January 2015.
Whilst browsing facebook on two occasions the screen has just gone a totally blank blue colour, no error messages or anything like that. I have to hard restart, as task manager won't come up, and windows 10 starts fine again, doesn't go thorugh CHKDSK or anything.
WIndows 7 works perfectly on my other partition so not a hardware or monitor problem just specific to windows 10.
View 2 Replies
Aug 18, 2015
Getting this Blue screen Error. Here is some more details.
==================================================
Dump File : 081915-32437-01.dmp
Crash Time : 8/19/2015 10:44:12 AM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : 00000000`00000002
[Code] ....
View 1 Replies
