Several times since Windows 10 has been updated (see attached file) I have received a "Critical_process_died" notification. Sometimes at startup & at least one time during normal browsing. Have talked with a local computer shop about various problems & he suggested a clean install. Attached is the dump file per your instructions.
View 1 Replies
I upgraded my OS to Windows 10 from Windows 8.1 some months ago. After some weeks I started to have "Critical Process Died" error very often. I couldn't figure out why. I've attached the relevant *.dmp files.
View 9 RepliesI get these random critical process died BSOD when I'm doing random things -- watching a movie or playing a video game. It happens during internet browsing as well.
View 5 RepliesRecently while using the internet my computer experienced a BSOD which listed the Critical Process Died as the error. Before this happened my computer kept popping up with a message I believe was saying that the display adapter driver crashed and then was recovered. It should also be mentioned that I recently upgraded my system with a new graphics card, after my old one died, and with a new case. That was my first time ever doing something like that, so I wouldn't be surprised if that could be a problem.
View 3 RepliesMy laptop is Leveno running Window 10. I got BSOD a lot recently, sometimes while using the laptop surfing on the Internet and sometimes activating it from standby. The errors I got were Critical Process Died, 000021a, and kernel error I have uploaded the error files for your interpretation.
View 5 RepliesI've a Dell XPS 15 9550 (512GB SSD PCIe) that gives me a BSOD after at least two hours of uptime. It doesn't create any dump, it only gives me the error on the BSOD critical_process_died. I alredy tried to do various clean install of the OS redownloaded a lot of times and to set from BIOS the drive to RAID in AHCI with various manually installed driver without any result.. I don't know what can I do anymore..
View 2 RepliesI'm having CRITICAL PROCESS DIED error sometimes when the computer starts.I attached the dmp file.
[PC Information]
Model Name PORTEGE Z30T-A
Part Number PT24CE-01600EN5
Serial Number XE107244H
OS Version Microsoft Windows 10 Pro 10.0.10240
[code]....
I have a Lenovo laptop with windows 8.1 pro. I upgraded to windows 10 pro. After a successful install I checked the desktop, All is fine. Then I rebooted the laptop and received a critical process died error (Blue screen) It occurs after I enter my user name and password. Then it crashes.
I have been able to go back to windows 8.1 and removed any 'questionable" software. i then re-installed windows 10 pro (Same error) This has happened 4 times. The laptop always crashes when signing onto windows 10.
This is getting very old, BSOD without warning, critical process died message, and reboots after collecting error information. I don't know what to do to fix it. Started after upgrade to Windows 10 from Windows 8.
View 5 RepliesUsing as an IT support/general office machine. Get BSOD 4-6 times daily.
As yet to determine what is causing. Have been removing software after each BSOD.
Win 10 Pro on Dell OptiPlex 380. Upgraded to 8gb mem and SSD.
Logs attached.
Firstly, I can't generate the dumpfile as I can't access windows at all. I can't access it through any boot options including safe mode.
I've recently upgraded from Windows 7 to 10 through the microsoft updater.
The only major thing I did before this happened was installing the AMD CCC and rebooting, which caused this loop. I actually reinstalled it as switchable graphics wasn't working.
Things I've tried - 1. Automatic Repair - doesn't work. txt file in srt folder says the OS version is not compatible even if I use the Windows 10 usb.
2. chkdsk /f /r - it fixed a bunch of things, there seemed to be a lot of problems but now it says that there is no problems and no further action is required.
3. Fixing and rewriting bcd files - This was the interesting part because my computer some how changed the C: to D: and created a new C:. I've reassigned it so that original C: is renamed back to C: and removed the new C: partition which only had the boot files in it and reformed all the bcd files in original C:
4. I can't run sfc /scanow. It doesn't work with any commands I found over the internet.
5. Other things I found were that if I tried to reset the computer while keeping the files, it doesn't allow me to do it. Also, I found out that some of my drivers were missing by using devcon - graphics (both integrated intel, dedicated radeon m6740) some sound cards, single usb driver. Also when I installed thne integrated intel graphics driver through pnputil, when I restart the computer, the driver disappears and comes up with code 28 again.
I don't mind doing a fresh install but only if I am able to access my current hd files and create a backup, which hopefully should be possible because I can access the files through cmd prompt in WindowsRE.
I upgraded my computer to Windows 10 from 8.1. After around a week of using Windows 10, each time I turned on my computer, I get a blue screen saying that the computer will restart. Like in the following picture.
Once it restarts, I can a log in and everything is fine. Except for one thing. When I open task manager, it says that my disk is filled at 100%, and the main program that is causing this is called "system".
I tried to increase the virtual memory, as seen in the next picture (I have 8GB of RAM by the way)
But that still does not seem to work. I downloaded seatools and it says that it is not a disk failure. Is there a possible correlation between the Critical_Process_Died startup page and the 100% disk usage?
For the past week or so I've been getting intermittent CRITICAL_PROCESS_DIED blue screens. I didn't do anything out of the ordinary and they seemed to just start popping up out of nowhere.
A couple things of note. After they started happening I tried creating new installation media for windows to try to repair windows if that was the issue. Every time I tried running the Media Creation Tool from MS it would crash before doing anything.
I ended up getting it on another computer and ran through repairing windows, but that didn't fix the issue.
Also, the crashes seem to not write the memory dump file, even though it's set up to do a complete memory dump.
If I can't sort it out I'll do a complete reinstall of windows, but I'd prefer avoiding that if possible, though it's not the end of the world.
So I was playing around with VBS and I screwd up the loop command and made my computer open like 50 mspaint. I hard shutdown my computer and then it just wouldn't boot up. Put me in the fix screen and gave me two options of restart or more advanced. Restart gives blue screen with critical process died, safe mode takes me back to that screen and nothing is fixing it.
View 1 RepliesWe've had our share of BSOD's in the company, most of them were solved by installing the newest drivers from the support site. There are still some laptops however, that get frequent BSOD's (4 a day on average).
The laptop is a Dell E5550, newest drivers & bios update. I've run the command sfc /scannow; after the scan was completed, it showed that there were errors but none could be fixed. I copied the log...
Also I don't know if I can run the dism / restorehealth command, because we have our own image on the laptops, and I if I understand correctly this replaces the current image with a default Windows image? Or does it only extract the files needed to repair?
I've been having problems recently with my laptop (Samsung 7 series) freezing. I then get a pop up saying "windows has stopped working", and it either unfreeze after a few minutes or I need to force close it.
This happened again yesterday, and wouldn't unfreeze so I force turned it off. Upon restarting, I got a BSOD with the message "critical_process_died", and the laptop restarted itself, only to BSOD again. Now when I turn it on it goes straight into disk repair for C:, saying it is scanning for and repairing errors. However, even after running overnight it never progressed beyond 9% on this, and now I cannot exit the loop without force closing the laptop - but when I reboot it goes straight back into disk checking.
A recent AVG scan was clean, and I cannot recall an update that happened yesterday. Unfortunately. Unfortunately I cannot load up the laptop to even check anything. Hopefully this is a software issue and I can get it fixed at a tech store, but I'm worried it could be a hardware problem (Internet suggested there was some memory corruption?).
I am using a Lenovo Y510P, originally installed with Windows 8.1. I upgraded to Windows 10 in July and it worked fine-ish up until now. I have recently (for the past few days) encountered quite frequent BSODs, most of the time with the code CRITICAL_PROCESS_DIED. I tried clean-resetting Windows 10 but the error kept recurring. It happened really randomly, sometimes when I was browsing the web in Chrome, sometimes when I was typing something in Skype, or in Microsoft Word, or sometimes when I just tried to refresh the desktop. So there's really no predicting when it is going to happen
P/s: After rebooting from BSOD, for some reason the system does not recognise any bootable device (and so it tries and fails to boot from my network?). But when I hard-reset the computer by holding the power button the system can boot into Windows again. I used to have grub2 bootloader for my Ubuntu, but after the first of such BSODs it died, somehow, so the system just booted straight into Windows from then on.
I have been struggling for a month now trying to fix my system, I have installed a windows seven then migrated to 10 but the issue I'm about to talk about has been happening since day one of me acquiring the new rig.
- Everything freezes
- Blue screen
- Varying problem. Either CRITICAL_PROCESS_DIED or UNEXPECTED_STORE_ERROR and a couple others.
What I did so far:
- Checked driver updates.
- SFC /SCANNOW.
- Reinstalled system.
What I suspect and hope it is not:
- CPU hardware malfunction.
- SSD hardware malfunction.
- Windows needs a good beating.
I have included the Dxdiag.text file and the CBS.log file.
I have this critical process died after my laptop goes on automatic update but in the middle of updating my electricity went off and since I didn't plug the battery it goes on hard shutdown.. When i try to start it again it shows this critical process died message. Won't startup, and can't go on safe mode.. I tried to use "reset this pc" option but it cancelled after going around 8% of the process.. I dont have back ups tho
View 1 RepliesI tend to get a BSOD when working in visual studio, often when doing something requiring heavy processing but occasionally simple things. The BSOD simply says CRITICAL_PROCESS_DIED. In googling, it seems that might be a driver error. I tried running the verifydriver, following the directions of a windows post I found, which caused the computer to bluescreen before loading windows every time with a driver error that did not specify a specific driver that caused the problem. I'm hoping that will be somewhere in the minidump that should be within the attachment (created by following the posting directions). I was not able to figure out from the minidump what driver might specifically be the problem, if I'm even barking up the right tree about a driver issue in the first place. There doesn't appear to be any minidump from the critical process errors unfortunately.
View 2 RepliesCritical Error (message). Start menu and Cortana aren't working.
We'll try to fix it the next time you sign in. Sign out now
(Tried but it returns each time).
Prior to upgrading to Windows 10, my system was running Windows 7 Home Premium SP1. When running my previous OS (WIN 7) I rarely had errors listed in Event Viewer. Now after upgrading to Windows 10, I get errors/warnings I never used to get under Windows 7.
The error is of the "Critical" level in Event Viewer.
After doing a normal shutdown, and then booting my system, I check Event Viewer and always find the following critical error:
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
---------------------- START: Event Viewer XML error text ---------------------
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
[Code] ....
I never used to get this error after doing a normal shutdown (prior to upgrade to Windows 10, when I was on Windows 7). Now it happens all the time. Why this error is occurring after doing a normal shutdown followed by a boot?
I suspect it's a glitch with the first production release of Windows 10, but I have no proof of that. My system runs fine, yet I get the above error (and a number of other errors) since I upgraded to Windows 10.
Toshiba laptop now with win 10 download on it. have had critical error twice but resolved both times. switched laptop on today and critical error came on screen, used powersuite to resolve it and when it came up to the end of its run, a box came up for a restart so I did. upon starting up the only thing on screen now is what appears to be vertical line flashing up at quite a high speed.
View 7 RepliesI bought a new computer a month ago, and am having BSOD each day. It's a Kernel Security Check Failure, and when i look in the event watcher, I can see a kernel-power critical error.
DESKTOP-AE1GEPA-09_01_2016_100618,48.zip
I have this BSOD while playing youtube.
crash dump file: C:WINDOWSmemory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x109 (0xA3A01F5A6788B6B1, 0x0, 0x4CA3D042862E2DA4, 0x101)
Error: CRITICAL_STRUCTURE_CORRUPTION
Bug check description: This indicates that the kernel has detected critical kernel code or data corruption.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
KELVIN-PC-Sun_09_08_2015_113755_86.zip
I get a bsod with "Critical error. Start menu and Cortana aren't working. We'll try fix it the next time you sign in."
Now I can't access anything on my laptop.
