BSOD :: Error When Computer Sits Idle For 10min+
Sep 26, 2015
I am running windows 10 and I've been getting these blue screen errors .. It usually happens when my computer is left idle for over 10-20 mins.. It displays a blue screen and then restarts. At first i had no clue . Later i checked the minidump folder and i found those BSOD log files. I've uploaded my system zip file as per the instructions. Before i used to get these errors while playing games but now they are even more frequent. As soon i leave my pc idle or doing some work and im away i encounter this bsod.
View 5 Replies
Similar Messages:
Nov 11, 2015
Basically what happens is, I get BSOD errors when my computer is idle after about 5-10 min, pretty consistantly. It doesn't happen after a windows complete re-install for about a week (give or take) then I start seeing symptoms again. Ive also been getting, what seems to be the same 3, not in ay particular order.
They are: SYSTEM_SERVICE_EXEMPTION, MEMORY_MANAGEMENT, and PAGE_FAULT_IN_NONPAGED_AREA. After doing a lot of homework and trial and error (not installing Norton Internet Security, Not updating Chipset Drivers...etc) ive resulted to the professionals. FYI Ive ran MEMTEST 86 at least 8 cycles with no errors.
My debug codes are attached to the post.
View 2 Replies
Oct 23, 2015
This has been going on for awhile and I cant seem to figure out the issue. I have turned off all C-State settings to fix the issue
View 1 Replies
Mar 5, 2016
The computer seems very stable right up until I let it go idle. After 4 minutes I get the REGISTRY_ERROR bsod. The system is not over clocked. CPU temps are low. Memtest86(+) runs fine for 8 passes with 0 errors. Disabling the two .NET tasks that start on idle in Task Scheduler made no difference (as per the post with a similar issue). CHKDSK /R requires a reboot and no messages are present on the screen while running but there is no log file generated in Event Viewer / logfiles / application. I ran sfc /scannow and got errors. A reboot and retry did not correct the error. I ran Dism /Online /Cleanup-Image /RestoreHealth and it successfully repaired the system. Subsequent scans with SCF indicate no issues or problems. Not sure if it is relevant but the system has a Samsung 950 SSD as the C drive.
View 9 Replies
Oct 5, 2015
First off my computer has always worked fine when going idle, the computer would go into sleep mode after an hour or hibernation mode which ever one, when the computer seems to be off when its not and power light blinks. About three days ago my computer started acting weird when i let it go idle instead of it cutting off after sitting the monitor will say no signal but the computer will still be running fans on and everything, if i click on the mouse or press buttons on keyboard nothing happens only thing i can do is cut off the computer or press the reset button on the case. I don't know why it started this all of a sudden but I don't like having to turn off and on by the power button when it does this.
View 1 Replies
Jan 7, 2016
I keep getting a fatal error message with Adobe reader v x1 and I can't uninstall it or install any adobe patches or updates. I can't reset my PC either. Cannot open some of my anti malware software either.
View 2 Replies
Aug 4, 2015
After upgrading to Windows 10, my computer now restarts after I have left it idle for more than about an hour. I havent caught it in the act so I don't know exactly what it does when it restarts. I changed the update settings to notify me before restart so that shouldn't be the issue in this case.
View 9 Replies
Dec 24, 2015
I have all the power settings set to stay active, but the computer goes into sleep or hibernation (I do not know which) after being idle for around 20 minutes.
View 3 Replies
Mar 5, 2016
After leaving my computer alone for a few minutes my computer restarts with a REGISTRY_ERROR BSOD. I have disabled ".NET Framework NGEN v4.0.30319 Critical" and ".NET Framework NGEN v4.0.30319 64 Critical" and also ran sfc/scannow with no integrity violation. I uninstalled and reinstalled my graphics drivers and also reseated the card.
KG-Sun_03_06_2016_192304_47.zip
View 3 Replies
Dec 17, 2015
This is a machine I built from scratch about six months ago. Upgraded to Windows 10 about two months ago. I keep getting very random crashes, sometimes once a week, some times more. Yesterday it happened twice.
It seems to only happen when the computer is unattended for a while. I'll have it on overnight and in the morning I have a black screen, sometimes with only the mouse cursor present.
As kind of a side issue, when turn it off then reboot, I have to hit F2 to get into the ASUS BIOS. Somehow the BIOS seems to change on it's own and drops the Patriot Blaze SSD from the boot path, so I have to hit F8, highlight Patriot Blaze, then it boots normally. In the past, I thought I fixed this boot issue by flashing the latest BIOS. It worked for a while and boots off the SSD, then after a week or two suddenly the SSD is dropped from the boot path.
There weren't any minidump files, so I am attaching the text of the Windows MEMORY file, which I got using Windows WinDbg (X64).
MEMORY.zipSAM-Thu_12_17_2015__64013_26.zip
View 9 Replies
Oct 11, 2015
For some backstory: I built this computer in late Feb of 2015. Over the last 5/7 months (two of which - July and August - I wasn't around to use it) and have had several issues with it since
Early March - Random BSOD relation to Shadowcopy files (reinstalled OS, issue ceisted)
Early September - Several random BSOD due to GPU drivers (uninstalling and reinstalling the drivers in Safe Mode - doing so in regular boot mode caused a BSOD - fixed this)
Late September - Single, random BSOD again. However, the computer could not get past the Windows Repair Environment (reinstalled the OS, issue ceisted)
Now - random freezing every few days to as often as once every few hours. This is my current issue. These freezes will occur suddenly and with no warning. One second I'll be watching a video, browsing, or playing a game then the next I'll be stuck. Any audio will loop constantly and the screen will be stuck at the last "frame". I've left it for as long as 30 minutes and it will not crash or bluescreen. The only option is to simply hold the Power button.
The event viewer will not have any error or warnings at the time of the freeze but will only have the error regarding the computer shutdown being forced at the time I hold the Power button. I was suggested to check for temps (all were normal) and perform a clean install of Windows 10 (I had upgraded from Windows 7). I had another hard freeze today similar to the ones I was having before. The issue is back and I'm unsure of what to do next. Is this no longer a software issue if reinstalling the OS was unsuccessful?
View 9 Replies
Aug 9, 2015
This started last week, after the power flickered a few times during a storm while I was on my computer. I began to notice that when I would take longer than a 10-15 minute break and leave my computer idle I would come back to the sign in screen.
I tested all my hardware and everything seems perfectly fine. I manually ran automatic maintenance and my PC restarted shortly after. I assume that when automatic maintenance would run while my computer was idle it would cause my pc to restart.
The question is, how can I disable automatic maintenance? I looked in task scheduler but there is nothing under Task Scheduler > Microsoft > Windows > Task Scheduler. How can i disable automatic maintenance on Windows 10?
View 1 Replies
Aug 12, 2015
This is happening sice i installed windows 10.On windows 8.1 this was not happening.
Every time when i try to update a game,and install something my laptop restarts and it saying "Page fault in nonpaged area"
I know how to fix it.Only instaling and updating games from Steam works.
View 1 Replies
Aug 11, 2015
As the title states, my computer will turn off the display or go to sleep (not sure of correct terminology) when I go idle for a short period of time. For instance, I get up to get a glass of water and when I come back, the screensaver is up and I need to re-enter my password. This problem arose immediately after the installing of windows 10 on my PC (upgraded from Windows 8.1).
I have already gone to control panel ~> power options but the thing is, even though I've already done that and set the options to "Never turn off display", "Never go to sleep" as shown in the screenshot, my PC still turns off display/sleeps after a short amount of time.
View 6 Replies
Mar 13, 2016
Rig only a few weeks old and I noticed for the second time now when my computer is left alone for awhile it acts like it's in sleep mode but mouse and keyboard don't seem to be waking it. I fixed it last time by just restarting computer...
View 1 Replies
Aug 5, 2015
I recently have been trying to download the windows 10 ISO with their media creation tool but when ever I start the download it just sits at 0% and spins. I have exhausted everything that I can think of for why it won't be working.
I have redownloaded the media creation tool. I have more than enough bandwidth. I have turned off my firewall and antivirus. Run the media creation tool as admin. Nothing
View 1 Replies
Feb 10, 2016
I am using Dell inspiron laptop (pretty old one) which started acting weirdly. Upon examining, there was a problem with HDD so I had it changed.
As soon as I got new HDD installed and installed Windows 10 on it, computer started acting weird again - slow startups, random freeze etc.- but it was running ok and I was fine with it. But earlier today, it suddenly displayed BSOD and crashed when it was idle. Now to the main and the funny part, it does not boot anymore. To elaborate, blank screen appears after BIOS screen (right when the logo of windows should be displayed) and it remains blank for several more minutes before the logo and spinning dots magically appear, it doesnt disappear thereafter.
I figured, I could run startup repair or some other tool to solve the problem by booting from the DVD of windows 10. Now for this one, the logo appears with the spinning dots which disappears after a while like it should. And after it disappears, blank screen persists thereafter. Dumbfounded, I tried booting from a USB stick of Windows 8 I had which gave the same problem.
View 1 Replies
Feb 10, 2016
I am using Dell inspiron laptop (pretty old one) which started acting weirdly. Upon examining, there was a problem with HDD so I had it changed.
As soon as I got new HDD installed and installed Windows 10 on it, computer started acting weird again - slow startups, random freeze etc.- but it was running ok and I was fine with it. But earlier today, it suddenly displayed BSOD and crashed when it was idle. Now to the main and the funny part, it does not boot anymore. To elaborate, blank screen appears after BIOS screen (right when the logo of windows should be displayed) and it remains blank for several more minutes before the logo and spinning dots magically appear, it doesnt disappear thereafter.
I figured, I could run startup repair or some other tool to solve the problem by booting from the DVD of windows 10. Now for this one, the logo appears with the spinning dots which disappears after a while like it should. And after it disappears, blank screen persists thereafter. Dumbfounded, I tried booting from a USB stick of Windows 8 I had which gave the same problem.
I have already tried altering most of the options in BIOS and the diagnostic tool gives and all-ok for all the installed hardware.
View 3 Replies
Jan 18, 2016
Whenever I let my computer idle for more than 10 minutes I get a BSOD with either MEMORY_MANAGEMENT or SYSTEM_SERVICE_EXCEPTION.DESKTOP-3FK3RKN-Mon_01_18_2016_204122_93.zip
View 4 Replies
Feb 10, 2016
I am using Dell inspiron laptop (pretty old one) which started acting weirdly. Upon examining, there was a problem with HDD so I had it changed.
As soon as I got new HDD installed and installed Windows 10 on it, computer started acting weird again - slow startups, random freeze etc.- but it was running ok and I was fine with it. But earlier today, it suddenly displayed BSOD and crashed when it was idle. Now to the main and the funny part, it does not boot anymore. To elaborate, blank screen appears after BIOS screen (right when the logo of windows should be displayed) and it remains blank for several more minutes before the logo and spinning dots magically appear, it doesnt disappear thereafter.
I figured, I could run startup repair or some other tool to solve the problem by booting from the DVD of windows 10. Now for this one, the logo appears with the spinning dots which disappears after a while like it should. And after it disappears, blank screen persists thereafter. Dumbfounded, I tried booting from a USB stick of Windows 8 I had which gave the same problem.
View 4 Replies
Oct 30, 2015
BSOD happens only when the computer cold boots from a prolonged inactive state. If the PC is off for several hours and is turned on it occurs. Computer typically blue screens, sometimes it freezes at the bios splash screen where they Windows 10 circular loading icon appears on this Gigabyte. I've seen multiple reasons for the occurrence such as bad pooler caller and irql not less or equal. The BSOD happens once then after the computer functions as normal with no other issues.
Power supply, graphics card, and SSD were both pulled from a previous build with zero issues in that build. New to this build is the motherboard, processor, and RAM.
Ran Memtest86 with no errors for 8 passes but I just realized it was after the initial cold boot BSOD and not going from the inactive state to the test directly. Will be swapping out the RAM at Microcenter today just to eliminate that possibility.
Windows 10 was a clean install but it happened on the previous install, BIOS is flashed to the most recent release.
View 2 Replies
Feb 10, 2016
My Lenovo PC suddenly shut down today and when I restarted it I got a BSOD with a 'bad pool header' message. I did eventually restart but soon shut down again with a 'k mode exception not handled' message. Now when I restart I get a blue page 'RECOVERY Your computer could not start properly. A required device isn't connected or can't be accessed. Error: 0xc0000225.'
I have a windows 10 system repair disk but when I try and boot from it I get 'non system disk or disk error'.
I recently (2 weeks ago) replaced the hard drive because the old one was showing SMART errors. I cloned the old disk to an identical disk and it seemed to be going fine until today. Not sure quite what to do next.
View 9 Replies
Jan 10, 2016
I have a problem with my computer that it automatically freezes most of the time and I have to turn off the power, and when I starts the cpu again, then 1 short beep and 1 long beep occurs. Also, sometimes the computer also displays BSOD's. The most common was UNEXPECTED_KERNEL_MODE_TRAP. Also KMODE EXCEPTION NOT HANDLED , and PAGE FAULT IN NON PAGED AREA occured recently.
View 3 Replies
Sep 18, 2015
Every time my computer's monitor goes to sleep, on awaking the computer will BSOD with "kernel security check failure" or the screen will not turn on and reboot the PC.
FIVE-Fri_09_18_2015__83806_71.zip
View 6 Replies
Feb 10, 2016
I was asked to open a new thread so thats what I did. In my old thread I was getting BSOD"s every few days, the problem seemed to dissapear 2 months ago, but this month my computer is acting up all again.
DESKTOP-ETA7JBR-ma_02-11-2015_190935,19.zip
View 6 Replies
Aug 10, 2015
After down loading windows 10 once I'm past the sign in start page every thing is just flashing and the computer is totally unresponsive. It is impossible to access any programs. I can't even try to go back to 8.1 unless I can do something in the UEFI BIOS setting I'm totally sunk.
I must admit to being a little naive as I didn't realize windows 10 was an experimental program for enthusiasts only, being as the download symbol had appeared mysteriously on my monitor, and the tv is showing advertisements for windows 10 every hour, I assumed that I wasn't going to bugger up a 3 month old computer.;
View 2 Replies
