I've upgraded to Windows 10 about two weeks ago and it's been going smoothly until I've gotten three BSOD in the span of less than 12 hours. I'll include the Dump files here too ....
I have this issue for about a month already. Starting with Windows 7 I thought the problem would resolve itself once I switched over to Windows 10. Sadly I was mistaken, IRQL_NOT_LESS_OR_EQUAL and KMODE_EXCEPTION_NOT_HANDLED BSOD occur every day when I startup my computer and try to watch a stream or video. After the computer rebooted it just crashes again (sometimes after I try to watch a stream/video and sometimes it freezes when I just open Google Chrome). It takes me 2-4 reboots every time until I can do anything on my computer.
I've been having this problem for a while now, random BSODs giving the IRQL not less or equal message. It happens at random times, and doesn't seem to be tied to any particular action.
Below is a Dropbox link to the minidumps from today. I use this machine to run my plex server and marketing software. I keep getting BSOD and cant seem to isolate the problem. A few of them seem to be related to Kaspersky.
I run high bandwidth intense programs with a bunch of threads (5,000+).
They system has 2 xenon e5506 with 32gb ram, CPU usage can sometimes hit the 100% mark for a few minutes but typical is stable around 60%. I recently downloaded and updated all drives/bios. I'm not sure if its too much processing at once that is causing the crashes, or if its a driver issues. Error I always get is IRQL related.
Crash Dump Analysis provided by OSR Open Systems Resources, Inc. [URL] ....
Sometimes I get the BSOD saying irql not less or equal. Sometimes I can restart it and it will boot normal. Sometimes it takes 20 times of restarting to finally go through. Not sure why it is happening but its not all the time and might go a month or two without it happening.
I have attached the debug.
i5 processor 16 GB Ram Windows 10 OS 64 bit AMD R9 290 Graphics Card
Brand new Alienware 17 R3 and I get this BSOD probably 70% of the time on system start, restart, or awake from sleep. It only occurs once, after it has occurred it will never happen a second time in a row. All it says is the whole "IRQL Not Less OR Equal" thing, then reboots. I have followed the instructions in the sticky and attached the corresponding zip file.
I have already updated several things from the Dell site directly after trying some google research on the subject. In the last 24 hours I have updated the BIOS, sound drivers, touchpad drivers, video drivers (both onboard and for the 980M.) I also updated the wifi and LAN drivers from the Dell support site about a week ago shortly after getting the machine.
I have recently upgrading to windows 10 on a fairly new machine, after doing so I have had regular BSOD (IRQL unexpected error), there doesn't seem to be much connection between them other than watching videos whilst online. When I got the first one I read a bug fix online which said to fix it either revert back to my previous OS (windows 8) or reinstall windows 10. I did the later thinking I could always revert back if that didn't work but alas it has now gotten rid of that option and the problem still persisted. I downloaded bluescreen view to work out that it was a problem with nwifi.sys driver, and so updated my wifi driver accordingly but the problem still persists.
I hopefully have attached the associated info dump.
The computer is a Acer Aspire E15 with 4gb RAM and Amd E2 Chip. It was originally running Windows 8.1 but I recently updated to windows 10 and I got the Irql not less or equal bsod. I can't access anything because it just goes back to the bsod.
So, I was chatting with Microsoft about an issue with OneDrive, and all of a sudden my computer crashes. The error says "KERNEL AUTO BOOST LOCK WITH RAISED IRQL". I have included the dump log in this thread.
I downloaded and installed windows 10 home premium version on my desktop. The blue screen have been annoying me time by time when I'm using OS properly. There are several errors shows up every often, such as bad pool xxxx, page management, no area paged found. I tried reinstalled OS but the problems still exist. How to solve those errors. Someone said its caused by the drive software which I don't know how to pick it up from so many drive tools in my system. By the way, is there anyway to solve problems directly except downloading new OS version again?Currently running home premium 10240
It was fine last night then suddenly today, this error keep appearing. Is there a way to fix it? I've been searching for solution but I still don't know what to do.
I purchased a new NUC6i3SYK last week. I have installed a 250gb Samsung evo 850 M.2 HD and 1 8gb stick of Corsair PC4-17000 DDR4 Ram.
Windows 10 is a fresh purchase and install downloaded direct from MS.
The Nuc worked fine with both the HD and Ram being recognised and W10 installed fine. I loaded the drivers from the Nuc support page and then updated Windows. Everything still fine. Then I proceeded to install other programs and went to bed.
Next morning the PC had crashed and failed to restart. After searching the net for possible cause I decided to reinstall Windows 10. This time i didn't load any drivers and the PC was NOT able to connect to the Internet because I thought one of the updates may have cased the crash.
PC was still unstable and crashed often to the point it was in a BSOD loop. I then reinstalled Windows 10 again and this time I installed the LAN driver only and Windows 10 updated itself. It stayed on for 12 hours and has now gone into a BSOD loop again.
The BSOD error message changes but the main ones seem to be
Run Memtest86 for approx 20hrs with no errors Performed a disk check Installed samsung magician to confirm HD firmware is the current version Updated the BIOS to current version
When starting my PC up it often yields a BSOD, which automatically restarts the PC and then enters windows fine. I have had no other BSOD apart from when booting up my PC.
I have random freeze and BSOD with various errors.
dumps as requested by stickythread are attached.
The problem was caused by the motherboard (BIOS P1.90), it seems that does not support 8X4GB ram modules. I have removed 4 modules and the problem has disappeared. I do not think that the memory modules are defective because memtest found no error.
I am currently trying to troubleshoot my computer as it has recently stopped booting up.
For months now, I have been having intermittent issues with BSODs, 'hardware errors' (in the reliability monitor) and freezes on multiple installs of Windows.A few weeks ago, I installed a new graphics card (Asus GT610 2GB) which replaced integrated graphics. Also, at the same time as installing the graphics card I 'refreshed' Windows 10 and installed all of the latest drivers.
All was running fine for a few days, until the computer simply refused to boot one day. When ever I try to boot now, the Windows startup screen simply hangs and never does anything. Safe mode simply boots to a black screen.I have tried to run linux live cds and Windows disks. All of which often fail to boot (they just hang on the startup screen).
So far, I have tested my ram with memtest86+ (8 passes) and hard drive with seatools (long test passed). I attach the last version I could get of the BSOD logs (the folder is slightly outdated as obviously I cannot get any logs now!)...
Windows 10 Pro 64-bit Nvidia GTX 570 ASUS P8Z77-V Intel i7-3770k 3.50 GHz
Starting Monday (I think) I started getting artifacts all over my screen then my computer would crash and restart (sometimes the artifacts would persist during the boot screens, which would force multiple restarts before I could even log into Windows). I was not in any situation with heavy loads on either the CPU or GPU. This happened multiple times. Eventually, it started giving me a BSOD and one of these three codes: "DCP WATCHDOG VIOLATION", "TRD VIDEO FAILURE", or "DRIVER IRQL NOT LESS OR EQUAL". Of all the dumps I got, the consensus from WhoCrashed is that it's the Nvidia kernel driver nvlddmkm.sys (in some cases it was dxgmms2.sys). My drivers were up to date at that point.
Two days ago I was told by the Nvidia chat "support" to use Revouninstaller and roll back my drivers to those from December, which I did. It took a lot longer, and it didn't actually crash, but I got artifacts again, the screen froze then flickered and came back, and then an error message came up saying that my Nvidia kernel driver had stopped working and recovered. At that point, I turned off for the night and went to bed. Yesterday I was able to use my computer for several hours without any problems, but just as I was about to turn in, it artifacted and crashed with a BSOD and one of those three codes above (can't remember which).
I ran a full scan using Windows Defender. It got about halfway done, then stopped. I couldn't start it again (gave error 0x8007139f). After a restart it would scan, but I'm convinced it didn't finish again (I was working on my laptop while it was scanning so I wasn't paying complete attention, but what took 30 minutes to get halfway before, "finished" in less than 10 minutes). I'm not convinced it's an infection yet, but I guess it's another things to check for if it turns out WinDef isn't cutting it.
I started getting some BSOD errors after updating to Windows 10 from 8.1. Windows 10 updated a couple months ago, and since that update I get bad pool header crashes multiple times a day. I used the DM log collector and attached the file.
I am usually pretty self sufficient when it comes to building/troubleshooting computers, but i am at a complete loss on this one.
So, I rebuilt a PC for a friend with a bunch of new parts and it started crashing about a week after he took it home (specs below). At first it was crashing ALL the time...playing games, watching twitch, anything. It would just randomly do a hard reset and restart normally without any sort of error codes, pop-ups, or even a bsod. I really mean random too, i desperately tried finding some consistency to the problem, but no luck on that.
Long story short, i have tested and swapped just about every part in this computer (except for the dvd drive). I have ran Memtest overnight on several occasions with no errors. I have checked and rechecked all bios settings and nothing is overclocked, memory timings are all dialed in correctly. Temperatures have not surpassed 55C on the CPU, and 70C is the max on the GPU. I have done a completely fresh reinstall of Windows 10 Pro 64-bit, and installed several different versions of drivers (and yes i cleaned out the old files after each uninstall). I unchecked that little box that auto restarts on system failure.
All of this, among other things i can't quite remember at the moment, have only slowed down the crashing to a minimum. After installing a new ssd and installing slightly older drivers, it seems to have cut down the crashing quite a bit. Right now it has reset twice in the past 24 hours, and it has only happened after exiting games, specifically BF4 and Garden Warfare.
I have checked the Event Viewer several times and three things pop out at me.
It seems like it is trying to tell me there is a fatal error with the CPU...but i have pretty much ruled out every possible hardware issue there could be at this point, including lack of power and bad video cables.
iI want to say it is a driver issue of some sort...but i am running a barebones OS right now with only the essentials running, and i have tried several different driver versions to no avail.
Here's the specs, Debugging files are attached.
Windows 10 Pro 64-bit -AMD FX-8120 -Gigabyte 78LMT mATX mobo -2x4GB G.Skill Ripjaw X 1600Mhz 9-9-9-24 -Corsair CX 600w Bronze -MSI GeForce 960 2GB (355.58 driver installed, graphic and audio drivers ONLY) -OCZ Trion 100 120GB SSD -WD Blue 1TB 7200rpm HDD -Enermax Ostrog case w/ several 140mm fans
So when the th2 update first became available i updated and was getting daily BSODs i went through and checked everything some were saying it was most likely memory corruption. I rolled back to see if it would stop blue screening and it did was stable for a few months. I figured Nvidia or most drivers had to be compatible by now and i wanted some of the bug fixes from 1511 so i updated again using an msdn ISO i had access to. Since then daily Blue Screens are reoccurring, I don't know if i buy that my hardware has gone bad as it's 100% stable under base Windows 10.
I can add a link to the .dmp file later tonight when i get home but for now I will include the descriptions of the BSOD.
CRITICAL_STRUCTURE_CORRUPTION
Ntkrnlmp.exe
I was remoted in from work and ran an SFC /SCANNOW it found nothing then the PC BSODd again so i can't upload the dmp file till tonight.
I've been getting a lot of BSOD errors recently but always within a minute or so from starting my computer up from sleep. The messages seem random, but one time I noticed graphical glitches before the BSOD so I have a suspicion that it may be related to the graphics card/drivers. If it doesn't crash within the first few minutes, it seems to be fine.
I tend to get a BSOD when working in visual studio, often when doing something requiring heavy processing but occasionally simple things. The BSOD simply says CRITICAL_PROCESS_DIED. In googling, it seems that might be a driver error. I tried running the verifydriver, following the directions of a windows post I found, which caused the computer to bluescreen before loading windows every time with a driver error that did not specify a specific driver that caused the problem. I'm hoping that will be somewhere in the minidump that should be within the attachment (created by following the posting directions). I was not able to figure out from the minidump what driver might specifically be the problem, if I'm even barking up the right tree about a driver issue in the first place. There doesn't appear to be any minidump from the critical process errors unfortunately.
Ok . I am getting random system lockups, can happen anytime. Sometimes using when using chrome or just on desktop. Happens most often when windows is on login screen, or sometime right before windows loads. Playing any game I have will cause crash to desktop. Crash time varies from game loading screen to playing game for a few minutes.
So far I have reinstalled windows 3 times. I have replaced motherboard because it crashed during bios update, thus ruining mobo, tried different power supply also. After installing windows I have installed latest drivers that I could find, didnt seem to make any difference from the drivers that were loaded when windows was first installed. I did notice that after I installed pc matic I got constant BSOD, So I uninstalled it. fewer BSOD But still have lockups and game crashes.
I have ran memtest for 24 hours with no errors, also ran tests on ssd and hdd drives with no errors.
AMD fx9370 asus m5a99fx pro 2.0 16 gb ram Amd radeon R9 200 sandisk 120gb ssd toshiba 2Tb drive LG dvd drive