BSOD :: No Apparent Reason - Critical Structure Corruption
Aug 26, 2015
My computer was working fine with Windows 10... but has developed a BSOD issue. I can't think of any changes I've made/programs installed etc, though this is likely the cause. I've run SFC /Scannow along with dism.exe /online /cleanup-image /scanhealth &dism.exe /online /cleanup-image /restorehealth
Everything says it's fine... but I'm still crashing. I've attached a copy of the file created as requested... but I'm very much at my wits end.
WINNIPEG-26_08_2015_190423_22.zip
When first running Scannow, it showed an issue with this file: MicrosoftEdgeSquare44x44.scale-125_contrast-white.png, which I have replaced with another version.
View 5 Replies
Similar Messages:
Dec 17, 2015
I was getting a random reboot about once every 36 hours, this is the 1st time I got a BSOD before rebooting
All I was doing when the BSOD hit was listening to music using Spotify
I've replaced the power supply and reinstalled windows. I also ran Memtest86+ no issues reported
DESKTOP-K4P77GV-Thu_12_17_2015__14648_04.zip
View 9 Replies
Aug 8, 2015
I have this BSOD while playing youtube.
crash dump file: C:WINDOWSmemory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x109 (0xA3A01F5A6788B6B1, 0x0, 0x4CA3D042862E2DA4, 0x101)
Error: CRITICAL_STRUCTURE_CORRUPTION
Bug check description: This indicates that the kernel has detected critical kernel code or data corruption.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
KELVIN-PC-Sun_09_08_2015_113755_86.zip
View 1 Replies
Oct 4, 2015
For no apparent reason whatsoever, the Windows 10 Store is not working on my PC.
I'm running the normal, up-to-date version of Windows 10 Home on my Dell XPS 12, upgraded from Windows 8.1 via the normal upgrade route.
The app is visible, but when I click on it nothing happens. Not having the Store obviously means I cannot update any apps, let alone install new ones.
I don't have a system restore point (stupid from my side - I know), so I'm not sure what to do. I wanted to do a Windows "refresh", but it seems I don't have that option - it seems I can only "restore" and loose all apps and settings (but keep files at least).
View 1 Replies
Oct 28, 2015
Still losing wifi sporadically for no apparent reason. Other devices still working on same wifi router, so signal is not a problem. It drops off at least once a day.
Tried all the recommended fixes including updated drivers, down-shifting to 802.11b.
Only "solution" is to disconnect and reconnect. Feels like going back to dial up days!! This part of Win 10 is appalling - NOT an improvement. And of course it always happens as the most inopportune time.
I initially went back to Win 7 and it all worked fine for over a week without one issue. As soon as I returned to Win 10 it started immediately, so it's definitely a Win 10 issue.
View 9 Replies
Feb 10, 2016
Today my computer has started crashing for no obvious reason giving me a bluescreen. No errors found in the event log and it crashed while just browsing the web. No newly installed applications just before the crash as I can recall.
Message on lblue screen: If you want more information you can search for DRIVER_IRQL_NOT_LESS_OR_EQUAL (L1C63x64.sys)
View 3 Replies
Jan 4, 2016
i get this error all the time for no definitive reason at all. the machine has only been built for a few months. i just clean installed win 10. did memchck and it didn't fix my problem.
a few things about my pc
cpu: amd fx9590
mobo: asus m5a99fx pro r2.0
gpu sapphire vapor x r9 280x
memory: 8 gb ram
psu: 1000w haswell
View 1 Replies
Mar 5, 2016
I'm having CRITICAL PROCESS DIED error sometimes when the computer starts.I attached the dmp file.
[PC Information]
Model Name PORTEGE Z30T-A
Part Number PT24CE-01600EN5
Serial Number XE107244H
OS Version Microsoft Windows 10 Pro 10.0.10240
[code]....
View 7 Replies
Oct 4, 2015
This is getting very old, BSOD without warning, critical process died message, and reboots after collecting error information. I don't know what to do to fix it. Started after upgrade to Windows 10 from Windows 8.
View 5 Replies
Nov 7, 2015
I upgraded my OS to Windows 10 from Windows 8.1 some months ago. After some weeks I started to have "Critical Process Died" error very often. I couldn't figure out why. I've attached the relevant *.dmp files.
View 9 Replies
Nov 23, 2015
I am having regular restarts when the system is under load all temps seem ok etc.
View 6 Replies
Nov 4, 2015
Using as an IT support/general office machine. Get BSOD 4-6 times daily.
As yet to determine what is causing. Have been removing software after each BSOD.
Win 10 Pro on Dell OptiPlex 380. Upgraded to 8gb mem and SSD.
Logs attached.
View 3 Replies
Sep 28, 2015
I get these random critical process died BSOD when I'm doing random things -- watching a movie or playing a video game. It happens during internet browsing as well.
View 5 Replies
Aug 29, 2015
Prior to upgrading to Windows 10, my system was running Windows 7 Home Premium SP1. When running my previous OS (WIN 7) I rarely had errors listed in Event Viewer. Now after upgrading to Windows 10, I get errors/warnings I never used to get under Windows 7.
The error is of the "Critical" level in Event Viewer.
After doing a normal shutdown, and then booting my system, I check Event Viewer and always find the following critical error:
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
---------------------- START: Event Viewer XML error text ---------------------
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
[Code] ....
I never used to get this error after doing a normal shutdown (prior to upgrade to Windows 10, when I was on Windows 7). Now it happens all the time. Why this error is occurring after doing a normal shutdown followed by a boot?
I suspect it's a glitch with the first production release of Windows 10, but I have no proof of that. My system runs fine, yet I get the above error (and a number of other errors) since I upgraded to Windows 10.
View 5 Replies
Sep 4, 2015
Firstly, I can't generate the dumpfile as I can't access windows at all. I can't access it through any boot options including safe mode.
I've recently upgraded from Windows 7 to 10 through the microsoft updater.
The only major thing I did before this happened was installing the AMD CCC and rebooting, which caused this loop. I actually reinstalled it as switchable graphics wasn't working.
Things I've tried - 1. Automatic Repair - doesn't work. txt file in srt folder says the OS version is not compatible even if I use the Windows 10 usb.
2. chkdsk /f /r - it fixed a bunch of things, there seemed to be a lot of problems but now it says that there is no problems and no further action is required.
3. Fixing and rewriting bcd files - This was the interesting part because my computer some how changed the C: to D: and created a new C:. I've reassigned it so that original C: is renamed back to C: and removed the new C: partition which only had the boot files in it and reformed all the bcd files in original C:
4. I can't run sfc /scanow. It doesn't work with any commands I found over the internet.
5. Other things I found were that if I tried to reset the computer while keeping the files, it doesn't allow me to do it. Also, I found out that some of my drivers were missing by using devcon - graphics (both integrated intel, dedicated radeon m6740) some sound cards, single usb driver. Also when I installed thne integrated intel graphics driver through pnputil, when I restart the computer, the driver disappears and comes up with code 28 again.
I don't mind doing a fresh install but only if I am able to access my current hd files and create a backup, which hopefully should be possible because I can access the files through cmd prompt in WindowsRE.
View 9 Replies
Aug 17, 2015
I upgraded my computer to Windows 10 from 8.1. After around a week of using Windows 10, each time I turned on my computer, I get a blue screen saying that the computer will restart. Like in the following picture.
Once it restarts, I can a log in and everything is fine. Except for one thing. When I open task manager, it says that my disk is filled at 100%, and the main program that is causing this is called "system".
I tried to increase the virtual memory, as seen in the next picture (I have 8GB of RAM by the way)
But that still does not seem to work. I downloaded seatools and it says that it is not a disk failure. Is there a possible correlation between the Critical_Process_Died startup page and the 100% disk usage?
View 3 Replies
Dec 16, 2015
Several times since Windows 10 has been updated (see attached file) I have received a "Critical_process_died" notification. Sometimes at startup & at least one time during normal browsing. Have talked with a local computer shop about various problems & he suggested a clean install. Attached is the dump file per your instructions.
View 1 Replies
Sep 13, 2015
For the past week or so I've been getting intermittent CRITICAL_PROCESS_DIED blue screens. I didn't do anything out of the ordinary and they seemed to just start popping up out of nowhere.
A couple things of note. After they started happening I tried creating new installation media for windows to try to repair windows if that was the issue. Every time I tried running the Media Creation Tool from MS it would crash before doing anything.
I ended up getting it on another computer and ran through repairing windows, but that didn't fix the issue.
Also, the crashes seem to not write the memory dump file, even though it's set up to do a complete memory dump.
If I can't sort it out I'll do a complete reinstall of windows, but I'd prefer avoiding that if possible, though it's not the end of the world.
View 9 Replies
Dec 16, 2015
Recently while using the internet my computer experienced a BSOD which listed the Critical Process Died as the error. Before this happened my computer kept popping up with a message I believe was saying that the display adapter driver crashed and then was recovered. It should also be mentioned that I recently upgraded my system with a new graphics card, after my old one died, and with a new case. That was my first time ever doing something like that, so I wouldn't be surprised if that could be a problem.
View 3 Replies
Apr 14, 2016
I tend to get a BSOD when working in visual studio, often when doing something requiring heavy processing but occasionally simple things. The BSOD simply says CRITICAL_PROCESS_DIED. In googling, it seems that might be a driver error. I tried running the verifydriver, following the directions of a windows post I found, which caused the computer to bluescreen before loading windows every time with a driver error that did not specify a specific driver that caused the problem. I'm hoping that will be somewhere in the minidump that should be within the attachment (created by following the posting directions). I was not able to figure out from the minidump what driver might specifically be the problem, if I'm even barking up the right tree about a driver issue in the first place. There doesn't appear to be any minidump from the critical process errors unfortunately.
View 2 Replies
Jan 28, 2016
We've had our share of BSOD's in the company, most of them were solved by installing the newest drivers from the support site. There are still some laptops however, that get frequent BSOD's (4 a day on average).
The laptop is a Dell E5550, newest drivers & bios update. I've run the command sfc /scannow; after the scan was completed, it showed that there were errors but none could be fixed. I copied the log...
Also I don't know if I can run the dism / restorehealth command, because we have our own image on the laptops, and I if I understand correctly this replaces the current image with a default Windows image? Or does it only extract the files needed to repair?
View 1 Replies
Jan 21, 2016
I've been having problems recently with my laptop (Samsung 7 series) freezing. I then get a pop up saying "windows has stopped working", and it either unfreeze after a few minutes or I need to force close it.
This happened again yesterday, and wouldn't unfreeze so I force turned it off. Upon restarting, I got a BSOD with the message "critical_process_died", and the laptop restarted itself, only to BSOD again. Now when I turn it on it goes straight into disk repair for C:, saying it is scanning for and repairing errors. However, even after running overnight it never progressed beyond 9% on this, and now I cannot exit the loop without force closing the laptop - but when I reboot it goes straight back into disk checking.
A recent AVG scan was clean, and I cannot recall an update that happened yesterday. Unfortunately. Unfortunately I cannot load up the laptop to even check anything. Hopefully this is a software issue and I can get it fixed at a tech store, but I'm worried it could be a hardware problem (Internet suggested there was some memory corruption?).
View 7 Replies
Nov 2, 2015
My laptop is Leveno running Window 10. I got BSOD a lot recently, sometimes while using the laptop surfing on the Internet and sometimes activating it from standby. The errors I got were Critical Process Died, 000021a, and kernel error I have uploaded the error files for your interpretation.
View 5 Replies
Nov 17, 2015
Toshiba laptop now with win 10 download on it. have had critical error twice but resolved both times. switched laptop on today and critical error came on screen, used powersuite to resolve it and when it came up to the end of its run, a box came up for a restart so I did. upon starting up the only thing on screen now is what appears to be vertical line flashing up at quite a high speed.
View 7 Replies
Jan 9, 2016
I bought a new computer a month ago, and am having BSOD each day. It's a Kernel Security Check Failure, and when i look in the event watcher, I can see a kernel-power critical error.
DESKTOP-AE1GEPA-09_01_2016_100618,48.zip
View 9 Replies
Feb 10, 2016
I've a Dell XPS 15 9550 (512GB SSD PCIe) that gives me a BSOD after at least two hours of uptime. It doesn't create any dump, it only gives me the error on the BSOD critical_process_died. I alredy tried to do various clean install of the OS redownloaded a lot of times and to set from BIOS the drive to RAID in AHCI with various manually installed driver without any result.. I don't know what can I do anymore..
View 2 Replies