When starting my PC up it often yields a BSOD, which automatically restarts the PC and then enters windows fine. I have had no other BSOD apart from when booting up my PC.
I downloaded and installed windows 10 home premium version on my desktop. The blue screen have been annoying me time by time when I'm using OS properly. There are several errors shows up every often, such as bad pool xxxx, page management, no area paged found. I tried reinstalled OS but the problems still exist. How to solve those errors. Someone said its caused by the drive software which I don't know how to pick it up from so many drive tools in my system. By the way, is there anyway to solve problems directly except downloading new OS version again?Currently running home premium 10240
I purchased a new NUC6i3SYK last week. I have installed a 250gb Samsung evo 850 M.2 HD and 1 8gb stick of Corsair PC4-17000 DDR4 Ram.
Windows 10 is a fresh purchase and install downloaded direct from MS.
The Nuc worked fine with both the HD and Ram being recognised and W10 installed fine. I loaded the drivers from the Nuc support page and then updated Windows. Everything still fine. Then I proceeded to install other programs and went to bed.
Next morning the PC had crashed and failed to restart. After searching the net for possible cause I decided to reinstall Windows 10. This time i didn't load any drivers and the PC was NOT able to connect to the Internet because I thought one of the updates may have cased the crash.
PC was still unstable and crashed often to the point it was in a BSOD loop. I then reinstalled Windows 10 again and this time I installed the LAN driver only and Windows 10 updated itself. It stayed on for 12 hours and has now gone into a BSOD loop again.
The BSOD error message changes but the main ones seem to be
Run Memtest86 for approx 20hrs with no errors Performed a disk check Installed samsung magician to confirm HD firmware is the current version Updated the BIOS to current version
I have random freeze and BSOD with various errors.
dumps as requested by stickythread are attached.
The problem was caused by the motherboard (BIOS P1.90), it seems that does not support 8X4GB ram modules. I have removed 4 modules and the problem has disappeared. I do not think that the memory modules are defective because memtest found no error.
I've upgraded to Windows 10 about two weeks ago and it's been going smoothly until I've gotten three BSOD in the span of less than 12 hours. I'll include the Dump files here too ....
I am currently trying to troubleshoot my computer as it has recently stopped booting up.
For months now, I have been having intermittent issues with BSODs, 'hardware errors' (in the reliability monitor) and freezes on multiple installs of Windows.A few weeks ago, I installed a new graphics card (Asus GT610 2GB) which replaced integrated graphics. Also, at the same time as installing the graphics card I 'refreshed' Windows 10 and installed all of the latest drivers.
All was running fine for a few days, until the computer simply refused to boot one day. When ever I try to boot now, the Windows startup screen simply hangs and never does anything. Safe mode simply boots to a black screen.I have tried to run linux live cds and Windows disks. All of which often fail to boot (they just hang on the startup screen).
So far, I have tested my ram with memtest86+ (8 passes) and hard drive with seatools (long test passed). I attach the last version I could get of the BSOD logs (the folder is slightly outdated as obviously I cannot get any logs now!)...
Windows 10 Pro 64-bit Nvidia GTX 570 ASUS P8Z77-V Intel i7-3770k 3.50 GHz
Starting Monday (I think) I started getting artifacts all over my screen then my computer would crash and restart (sometimes the artifacts would persist during the boot screens, which would force multiple restarts before I could even log into Windows). I was not in any situation with heavy loads on either the CPU or GPU. This happened multiple times. Eventually, it started giving me a BSOD and one of these three codes: "DCP WATCHDOG VIOLATION", "TRD VIDEO FAILURE", or "DRIVER IRQL NOT LESS OR EQUAL". Of all the dumps I got, the consensus from WhoCrashed is that it's the Nvidia kernel driver nvlddmkm.sys (in some cases it was dxgmms2.sys). My drivers were up to date at that point.
Two days ago I was told by the Nvidia chat "support" to use Revouninstaller and roll back my drivers to those from December, which I did. It took a lot longer, and it didn't actually crash, but I got artifacts again, the screen froze then flickered and came back, and then an error message came up saying that my Nvidia kernel driver had stopped working and recovered. At that point, I turned off for the night and went to bed. Yesterday I was able to use my computer for several hours without any problems, but just as I was about to turn in, it artifacted and crashed with a BSOD and one of those three codes above (can't remember which).
I ran a full scan using Windows Defender. It got about halfway done, then stopped. I couldn't start it again (gave error 0x8007139f). After a restart it would scan, but I'm convinced it didn't finish again (I was working on my laptop while it was scanning so I wasn't paying complete attention, but what took 30 minutes to get halfway before, "finished" in less than 10 minutes). I'm not convinced it's an infection yet, but I guess it's another things to check for if it turns out WinDef isn't cutting it.
I started getting some BSOD errors after updating to Windows 10 from 8.1. Windows 10 updated a couple months ago, and since that update I get bad pool header crashes multiple times a day. I used the DM log collector and attached the file.
I am usually pretty self sufficient when it comes to building/troubleshooting computers, but i am at a complete loss on this one.
So, I rebuilt a PC for a friend with a bunch of new parts and it started crashing about a week after he took it home (specs below). At first it was crashing ALL the time...playing games, watching twitch, anything. It would just randomly do a hard reset and restart normally without any sort of error codes, pop-ups, or even a bsod. I really mean random too, i desperately tried finding some consistency to the problem, but no luck on that.
Long story short, i have tested and swapped just about every part in this computer (except for the dvd drive). I have ran Memtest overnight on several occasions with no errors. I have checked and rechecked all bios settings and nothing is overclocked, memory timings are all dialed in correctly. Temperatures have not surpassed 55C on the CPU, and 70C is the max on the GPU. I have done a completely fresh reinstall of Windows 10 Pro 64-bit, and installed several different versions of drivers (and yes i cleaned out the old files after each uninstall). I unchecked that little box that auto restarts on system failure.
All of this, among other things i can't quite remember at the moment, have only slowed down the crashing to a minimum. After installing a new ssd and installing slightly older drivers, it seems to have cut down the crashing quite a bit. Right now it has reset twice in the past 24 hours, and it has only happened after exiting games, specifically BF4 and Garden Warfare.
I have checked the Event Viewer several times and three things pop out at me.
It seems like it is trying to tell me there is a fatal error with the CPU...but i have pretty much ruled out every possible hardware issue there could be at this point, including lack of power and bad video cables.
iI want to say it is a driver issue of some sort...but i am running a barebones OS right now with only the essentials running, and i have tried several different driver versions to no avail.
Here's the specs, Debugging files are attached.
Windows 10 Pro 64-bit -AMD FX-8120 -Gigabyte 78LMT mATX mobo -2x4GB G.Skill Ripjaw X 1600Mhz 9-9-9-24 -Corsair CX 600w Bronze -MSI GeForce 960 2GB (355.58 driver installed, graphic and audio drivers ONLY) -OCZ Trion 100 120GB SSD -WD Blue 1TB 7200rpm HDD -Enermax Ostrog case w/ several 140mm fans
So when the th2 update first became available i updated and was getting daily BSODs i went through and checked everything some were saying it was most likely memory corruption. I rolled back to see if it would stop blue screening and it did was stable for a few months. I figured Nvidia or most drivers had to be compatible by now and i wanted some of the bug fixes from 1511 so i updated again using an msdn ISO i had access to. Since then daily Blue Screens are reoccurring, I don't know if i buy that my hardware has gone bad as it's 100% stable under base Windows 10.
I can add a link to the .dmp file later tonight when i get home but for now I will include the descriptions of the BSOD.
CRITICAL_STRUCTURE_CORRUPTION
Ntkrnlmp.exe
I was remoted in from work and ran an SFC /SCANNOW it found nothing then the PC BSODd again so i can't upload the dmp file till tonight.
I've been getting a lot of BSOD errors recently but always within a minute or so from starting my computer up from sleep. The messages seem random, but one time I noticed graphical glitches before the BSOD so I have a suspicion that it may be related to the graphics card/drivers. If it doesn't crash within the first few minutes, it seems to be fine.
I tend to get a BSOD when working in visual studio, often when doing something requiring heavy processing but occasionally simple things. The BSOD simply says CRITICAL_PROCESS_DIED. In googling, it seems that might be a driver error. I tried running the verifydriver, following the directions of a windows post I found, which caused the computer to bluescreen before loading windows every time with a driver error that did not specify a specific driver that caused the problem. I'm hoping that will be somewhere in the minidump that should be within the attachment (created by following the posting directions). I was not able to figure out from the minidump what driver might specifically be the problem, if I'm even barking up the right tree about a driver issue in the first place. There doesn't appear to be any minidump from the critical process errors unfortunately.
Ok . I am getting random system lockups, can happen anytime. Sometimes using when using chrome or just on desktop. Happens most often when windows is on login screen, or sometime right before windows loads. Playing any game I have will cause crash to desktop. Crash time varies from game loading screen to playing game for a few minutes.
So far I have reinstalled windows 3 times. I have replaced motherboard because it crashed during bios update, thus ruining mobo, tried different power supply also. After installing windows I have installed latest drivers that I could find, didnt seem to make any difference from the drivers that were loaded when windows was first installed. I did notice that after I installed pc matic I got constant BSOD, So I uninstalled it. fewer BSOD But still have lockups and game crashes.
I have ran memtest for 24 hours with no errors, also ran tests on ssd and hdd drives with no errors.
AMD fx9370 asus m5a99fx pro 2.0 16 gb ram Amd radeon R9 200 sandisk 120gb ssd toshiba 2Tb drive LG dvd drive
I know it says to install and run the program in the sticky but i can't get into windows
PC has been running fine until recently. I have been getting occasional random BSOD errors over the last few days which I didn't think much about, but today I started getting a lot of them, occurring a few minutes after boot. After a few restarts I then started getting a black screen with cursor when the login screen should appear. The jingle still sounds. Some of the BSOD errors I wrote down.
Bad pool header
PFN corrupt
Memory management
0xc000021a
The black screen will not respond to CTRL ALT DEL etc. I tried following steps on some posts to enter password blind by pressing space /ctrl but this does not work for me. The screen stays on indefinitely.
I have also tried chkdsk on C drive. No errors. I tried system restore, but it says I have no checkpoints. I thought I did have it switched on but I guess not.
I tried start up repair but it says it cannot fix the problem. I don't have a system image either (I know, I'm a fool). I tried safe mode and low res mode. Same black screen just with a larger cursor.
Apart from reinstalling windows again, i can't think of any other things to try.
Upgraded from Windows 8.1 Pro to 10 Pro. I think I took care of the update bug so I don't believe it is the issue.
Updated GForce Drivers after using DisplayDriverUninstaller. SSD C: Drive firmware updated. Ran Memtest86+ on each stick for 8 passes with no errors. Updated audio drivers. Updated network drivers. Updated SATA drivers. Ran Windows Defender Full Scan with no findings. Ran Malwarebytes Full Scan with no findings.
It happens when I play games. I ran one 3DMark test with no issues. Ran it again and it reset as it normally does. I ran Furmark for 5 mins with no issue.
I have this issue for about a month already. Starting with Windows 7 I thought the problem would resolve itself once I switched over to Windows 10. Sadly I was mistaken, IRQL_NOT_LESS_OR_EQUAL and KMODE_EXCEPTION_NOT_HANDLED BSOD occur every day when I startup my computer and try to watch a stream or video. After the computer rebooted it just crashes again (sometimes after I try to watch a stream/video and sometimes it freezes when I just open Google Chrome). It takes me 2-4 reboots every time until I can do anything on my computer.
A few days ago, my PC (Lenovo PC, AMD A10 processor) was working completely fine. But then, I logged on and found that all my services had been disabled. After changing them all back to "Automatic", every time I woke my PC up from Sleep mode, it gave me the BSOD (error: CRITICAL_PROCESS_DIED). Recently, and more worryingly, it now sometimes takes me to the same BSOD on startup, just atfer I have logged on.
(It's my only PC, so it's quite urgent as it constantly disrupts my work)
debug-LENOVOLIU-31_10_2015__90840_14.zip.xxxx (This is the diagnostics file)
computer always crashes after windows logo , after restarting for 3-4 times, sometimes even 6-7 times the system works normally, it doesn't crash after that, have added the dump files.DESKTOP-9P2CR59-06-09-2015_110256_42.zip
I've been experiencing startup issues with my PC since last night. I go to startup and startup freezes. It seems that something is either stuck or freezing up on loading. Since it doesn't fully boot up, I have been hitting the reset button or holding the power button. It appears that this has made the problem worse. I went to startup this morning and am getting the same thing. Did the same steps of hitting reset and or holding the power button to shutdown. After this I am getting BSOD that keeps restarting and BSOD in a loop. The next boot loaded with repair options. I attempted to do startup repair and have been unsuccessful. How to get out of BSOD restart loop?
A Gigabyte Z97X Gaming G1 Motherboard An Intel i7 4790K CPU 16 GB DDR4 Patriot Memory sticks Samsung EVO 240GB SSD Nvidia 256 GB Graphics card Corsair CX750 Power supply
I immediately bought Windows 10 for it, and for the most part the computer worked fine the last few months. Every once in a while I would get a "Driver Stopped Working but has Recovered" that messed up the Windows control bar and required a restart to fix, but that stopped happening eventually with updates. I still got BSoD's from time to time, including "faulty hardware corrupted page."
Today I got a BSoD when I was logging in called "DPC Watchdog Violation," which I had seen before I think so I figured it would just restart and be fine. However, now I cannot restart the computer, because after the Gigabyte motherboard logo, all I get is a blue screen that flashes on and off quickly. It is just a blue screen, sometimes with a dot in the middle. No matter what I cannot get past this infinite flashing screen, even in safe mode. Commands from the keyboard do nothing once I reach this screen although I can the mouse around. I can enter the special Windows control menu before getting to the flashing blue screen, but nothing has worked from there
Things I've tried: -Disabling restart after BSoD -- no effect -Restoring system image -- error, then no effect -Resetting Windows -- no effect (although I've lost all my applications now) -Removing my graphics card and plugging my monitor directly into the motherboard -- no effect -Updating BIOS -- no effect
Currently trying to figure out something I can do in the registry. My last option is completely redownloading Windows 10 without saving files, but I'm not confident that will work given everything else I've tried.
I have just experienced a New thing in windows 10. I restarted my laptop, and windows wont start...it gives me the 0xc00000b error...and i cant enter windows by any means...
Several times since Windows 10 has been updated (see attached file) I have received a "Critical_process_died" notification. Sometimes at startup & at least one time during normal browsing. Have talked with a local computer shop about various problems & he suggested a clean install. Attached is the dump file per your instructions.
I should probably preface by saying I am using a custom-built machine and never had a BSOD when I was using Windows 7. Since I took the plunge, I've been greeted by a BSOD on nearly every startup (usually around 1-3 minutes after the lock screen appears, before logging in). About 1 out of 6 startups have no BSOD, as evidenced by the frequency of the attached minidump files.
Every time, it's the same error, being KERNEL SECURITY CHECK FAILURE, which leads me to believe this issue stems from a single source (don't know much about BSODs so this is based on absolutely zero knowledge). I'm not sure if this changes anything about the diagnosis, but after the PC restarts from one BSOD, it generally reboots perfectly unhindered. I really just want to make sure these errors aren't pointing to a larger issue that needs to be addressed immediately.
I've been having some BSODs both on startup and while running some programs. Most recently I got a Page Fault in Nonpaged Area while using Firefox. While running Diablo 3 last month I got a Memory Management BSOD. On boot last month I got an IRQL Not Less or Equal BSOD.
