All of a sudden my Dell Inspirian PC crashed with a continuous message on screen: Recovery Your PC/DEVICE Ned's to be repaired. Please see the screenshot of error. I need to find out as to how I can now copy and save my documents on an external drive before using the recovery USB.
View 3 RepliesUpgraded last night and am slowly working through minor issues. One thing that's confusing me - my username is supposed to be in the Administrator group on my computer, but my settings seem to be connected to the Home User group instead. I first discovered this when I tried to open Outlook and Outlook couldn't access my .pst file. I went into Security and gave the Home User group full access. Problem solved.
Next, I found that I couldn't save to any of my Documents folders. I found that if I changed Security settings to full access on each individual folder, it would allow me to save, create new folders, etc. Now I'm wondering if it's possible to make this a more global change? Changing access to every stinkin file is pretty annoying and it seems logical that there should be a global setting to do this. (One more thing related to user issues: what's the use of being in an Admin group if you don't actually have Admin permissions to run things? The cmd menu won't allow me to do anything...)
Going from Windows 7 to Windows 10 I don't know how to create & save a document.
View 4 RepliesI cannot get permission to save anything to my documents, or photos, do I uninstall One Drive? If So how, and is this the answer to the problem. I have seen all the do not work fixes and to be honest getting frustrated, I have changed all permissions to administrator in all boxes checked.
View 1 RepliesI originally upgraded to windows 10 and at first I couldn't find my documents or photos. I was then able to locate it under the windows.old file in which I dragged the photos and documents to file explorer. One thing I noticed was my personalization was not the same so I set up my background image, etc. THEN, a day later my computer restarted and had all of my previous settings before I did the upgrade and that's when I lost my photos and documents. I couldn't find it in windows.old, network, hard drive, owner, etc. So I decided to revert back to windows 7; again docs and pics not there. Finally, I upgraded back to windows 10 as I feel my files are gone for good. I did not delete anything so I don't understand why it is gone.
View 1 RepliesI have 2 monitors on my system. When the system comes up from power saving mode (unsure if in true sleep mode but user password is required) the task bar on the primary monitor is missing. The secondary monitor has it but not primary touch screen. I've tried various things like toggling auto hide, etc, to no avail but restarting brings it back.
View 2 RepliesI upgraded from Win8.1 to Win10 on my Lenovo Laptop and every thing was fine .Then i went and installed the Nvidia driver for my graphics card and restarted .On doing the restart i was getting a blank black screen. So then i went into safe mode and installed the Intel graphics drivers that came with my laptop and restarted .
On doing the restart I am always going into recovery mode now . Even if i try to boot in safe mode it goes into recovery mode. I tried even to do the windows repair via the recovery mode but it does not work.The only thing that i have is the command prompt in recovery mode .Can I install the latest driver via command prompt in recovery mode ? or how should i fix this issue ?
I upgraded my Toshiba laptop automatically from 8.1 to 10 when the software came out (months ago) - have had no issues with it. Then I was using my laptop then flashed blue and turned off. It now comes up with with recovery - your pc/device needs to be repaired .. Due to critical system driver missing or corrupted (see image) - I'm able to access the recovery settings - have tried refresh, system restore, automatic repair, nothing works and seems to get worse.
I've searched for the last day forums and most people seem to have boot/bcd errors and so don't work for this problem. I have a lot of personal files/photos that haven't been backed up for about a month and want to save them! I've downloaded the Windows 10 iso to a usb - but have only get semi regular access to a Mac so unsure if it's bootable.
2 out of the 3 computers at work I have installed Windows 10 Pro on, have an issue of when I reboot the computer, the desktop icons, that were arranged in a certain way, have now all moved to the very left of the desktop. I am running Classic Shell on the machines and so get a desktop view immediately when booting. It's annoying. Windows 8.1 does not do this.
My work computer has both XP and Windows 10 PRO on it as a dual boot. It had a Windows 10 preview edition on it since back in April or May. Then when we decided to move into Windows 10, I merely bought a DVD of Win 10 Pro and when running in that preview OS on the one partition I installed the DVD and did and upgrade. Works fine, but every once in a while I see the explorer view of folders and when I close the folder {X} it magically appears again and click the X again to close it.
For the time I installed a program called DesktopOK ver 4.16 on the one computer and seems to be holding it's own so far (no moving icons back over to the extreme left.
Yesterday I made an update from AVG, which needed the pc to be restarted. I did restarted it, and during the update it gave me an error page starting with " " and after it...my pc wouldn't work anymore. When I started it, it started with the black page showing pc components information and after that another black screen with a _ on the top left of the screen going on and off forever. Then I maneged to put Win10 driver in a Usb drive and I tried to boot from it, and it entered Recovery mode. Here I followed a guide which told me to select "Troubleshoot", then "advanced options" and finally "startup settings". The only problem is...there is no "startup settings".There's everything else but not startup settings, so I can't even try to make it work. How can i make my PC work again?
View 5 RepliesSo i added an WD 2TB HDD to my computer, and removed an old ATI Sapphire HD 5450 GPU. When i booted up, my computer was unable to find an OS, and it said to remove any HDD that does not have an OS, and so i did. Then i t said reboot and choose device, but when o rebooted, it just went back to the same screen. I tried to enter system recovery, but it bluescreened... i have tried this like 6 times, rearranging SATA cables and SATA power cables,
SYSTEM SPECS:
Intel core i7 6xxx 3.4 GHz
MSI GAMING PRO MOBO
MSI GTX 970
HYPERX FURY 16GB RAM
ATI Sapphire HD5450 (the one i removed)
240GB SSD, + 108 GB HDD + WD 2TB HDD ( the one i wanted to add)
I am using Word 2013 on my laptop. Windows 8 was operating system. Recently upgraded to Windows 10. When I save Word documents now, they are saved as Wordpad documents. (.xml files) Wordpad does not recommend some of the Word formatting and alters the documents.
How do I correct this? I want the save as Word documents, as I did in the past.
I've trying out the new preview, 10240. Everything works fine except for the default documents folder (and the same for Images). As my screenshots reveal, by default the documents and images folder are the ones with OneDrive. (My system is in Spanish, but it seems self-explanatory, I believe)
After some examination, I located the "Storage" section in the new settings window and I see that the default folder for Documents is OneDrive. However, after I set to "This PC (Drive C)" it doesn't do anything, as as soon as I close the window, the option reverts back to OneDrive.
I actually like and use OneDrive, and I had no problems with it with Win8.1. So I don't want to disable it.
I had a series of BSOD's today. It's something with ntoskrnl.sys and ntfs.sys according to the minidumps attached.
It all began after installing Google Photos Backup and refreshing my graphic drivers but I am not sure they have anythig to do with it.
Recently, my Windows 10 installation started to give me BSOD's. Never after a fresh boot, but always (some time) after the PC has been in sleep mode.
Please see the attached files......
I have a problem with my Asus S56C, I have frequent BSODs, but they only occur after few seconds or few minutes out of the Stand By mode. It does not happen after restarting restarting or turning on the PC. I have already tested the RAM and Hard Drives. Updating to Win 8.1 and then 10 did not change the problem or the way it happens. Since it might be a driver problem, I have tried to play a little bit with Driver Verifier but the drivers are so many that I was not able to identify only one and then I stopped because it was really too time consuming. I updated all thedrivers manually from the Control Panel, but it did not change anything. For the rest the computer is fine, I sent it to the ASUS Service when was still under warranty and they replaced RAM, HD, DVD-ROM, but not the 24 Gb SSD. It also came back with a clean Windows 8 but it had the same problem after installing just Avast, Chrome and Mozilla (I have already uninstalled Avast and no improvements).
View 1 Replies[Desktop Dell Inspiron 560 4gb RAM; high speed cable; MS Windows10
64bit; Windows Live Mail 2012; MS Word Pro 2003; Mozilla Firefox; Avast
AV; Windows Media Player; Adobe Reader; Adobe flash Player]
After a long struggle to import my pix from the camera to Win10 and finally succeeding, I've now another mystery
1. How to put the imported 10 or so photos into a folder? I did it with another bunch of imported photos and now I can't remember how I did it though I tried and tried..
2. How can I pick out the ones I want to send (and how to send them by email?) as I prefer not to delete the ones I won't send, to avoid later regrets. I don't even know how to delete any individual photos....
MS keeps everything a secret - no links to choose photos, or delete them, or send them, or change the order in which they are arranged, etc. I had come to learn photos in Win7 with "Photo Gallery" after a long time - now I'm condemned to the same torture on the new windows!
I upgraded from 8.1 to 10 and had no problems for a while until I began using sleep mode. About every night or two when in sleep mode, my system shuts down. I'm not here when it does so I don't see a blue screen and appear to have no other problems. I used WhoCrashed and get this info every single time I check it.
crash dump file: C:WINDOWSMinidump100815-12343-01.dmp
uptime: 14:28:45
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFE001FD59D710, 0xFFFFD001F6446990, 0xFFFFE002062B69E0)
Error: DRIVER_POWER_STATE_FAILURE
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.his appears to be a typical software driver bug and is not likely to be caused by a hardware problem. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
I can build computers but I suck at figuring out problems like this. All the drivers are up to date and since this started, Nvidia has had 3 driver updates that I've tried that make no difference.
When I close the lid of my laptop, put it into sleep mode, or put it into hibernation mode, the laptop basically shuts down. The power light flashes on and off, but when I reopen the lid or press the power button to turn it back on, the screen flashes grey and reboots.
What I have tried:
Changing all of the advanced power options
Resetting my laptop (to before the issue started occurring)
Restoring my laptop to factory settings
Redownloading windows 10
Disabling the UEFI (BIOS) setting that allows the computer to be turned off to save power
Updating the drivers that were suggested on the windows eight forums
Downloading the chipset driver from Asus
Downloading the ACHI Link Power Management and trying all the settings
What I've done in the command prompt:sfc /scannow then Dism /Online /Cleanup-Image /RestoreHealth.I also tried the chkdsk command but there were no problems found
When I started noticing the problem:After I downloaded VMware's player and created a virtual computer with Ubunt
My brother has a laptop (~4 yrs old). The battery went bad a couple of years ago, and so it now need to be plugged in all of the time. The laptop was asleep when he unplugged it to move it, and when he opened the lid again, it had shut down (very likely because it died). Upon starting it, he got the BSOD and 0xc000021a error code.The startup repair couldn't fix his problem. Two restore points he had on the system from installing DirectX a few days earlier didn't work. I tried entering safe mode, no luck. Now thinking I was at a last resort, I tried to refresh Windows, keeping his files but removing all the installed programs. I got a message at around 60% telling me Windows encountered a problem and couldn't complete the procedure. Same deal with the full reset. At this point, a reboot greeted me with "No operating system could be found".I got a large USB and made it into a recovery drive, checking the box that said to include OS files or something (can't remember the exact wording). I tried again using startup repair, then reinstalling windows
View 3 RepliesMy Asus T-100 hybrid tablet/laptop won't wake up from hibernation. It tells me to swipe to shut down computer and nothing happens. I ran down the battery, plugged in and then recharged. It's still stuck on hibernate and won't let me into windows at all.
View 2 RepliesI recently installed Windows 10 from 8.1 on my HP pavilion laptop (I got it just over a year ago, not sure the exact model). All I did was go through the free upgrade process.
Everything seemed to work fine in the first 24 hours, but now I encounter a blue screen with grey lines when I try to boot. Eventually, after a few attempts (on its own) at rebooting, I get to the repair/restore screen. System restore hasn't worked in the few times I've attempted it, and I can only boot up in safe mode without networking.
I have no media disc for Windows 10 or anything like that, and I'm relatively inept in programming.
I installed windows 10 about a week ago and all was working fine until I decided to try sleep mode a couple of days ago. I activated sleep mode but noticed after powering off that my PC was turning back on for a few seconds before powering back off in a loop. I didn't think to much of it and powered it off at the wall thinking that would clear any sleep errors. Well I've come back to use it after a couple days and it's still is stuck in a power loop of starting for 3 or 4 seconds before powering back off again in a continuous loop!
No chance to go into the bios, no sign of windows, just an endless power cycle!
I have a custom PC build and I have experienced 3 BSOD over the past maybe 2 months all being "UNEXPECTED_KERNEL_MODE_TRAP. I have done some "research" (by that I mean googling) and lots of people say its Drivers. My system is fairly new (<1year). But I tested the memory when I got it with memtest and being DDR3 it failed the hammer test which most people say do not worry about. I have had some trouble once due to a weird error while installing an NVIDIA driver.
View 4 RepliesIn order to force a safe mode start in Widows 10, I used the msconfig command in the Run Box. I clicked the "networking" radio button; unfortunately, that UNCLICKED the "minimal" radio button. Now I am unable to boot into anything. I have created a Repair / Recovery Disc from a similar PC, but it does not work with my HP ENVY.
View 10 RepliesEvery time I try to boot into safe mode or advanced options I get the same BSOD ERROR: CRITICAL_PROCESS_DIED.. Is there any other way for me to accomplish this?
View 1 Replies