BSOD :: Slow Copying From / To Pen Drive
Aug 11, 2015
I have noticed a bug in windows 10 home.Copying any file from/to a pen drive connected to my windows 10 PC is very slow. Transfer speed is 5mbps maximum.Same file is transferring at normal speed(20-25mbps) when I transfer it within local drives(i.e. D drive to E drive) Hence I can say, transfer is slow in case of PC and Pen drive ONLY.
P.S:
1) Same pen drive is working perfectly in another PC having windows 8.1 running.
2) Drivers are up to date.
3) I upgraded(not done clean install) from Windows 10 insider preview to Windows 10 home.
View 6 Replies
Similar Messages:
Jul 23, 2015
I am using Win10 10240. I have a problem copying a large number of big files. The setup is a bit tortuous.
The source is an old WD Cloud NAS on ethernet via my ethernet connected router. The destination is an external hard drive on USB3.0
Using file explorer, I drag a bunch of folders to the destination and copying begins but either stalls soon after or indeed never starts. When it works the speed is around 10Mp/s but why does it stall at random places?
I've tried just copying a single folder too. Single files are OK. I've looked at the resource monitor and so on and can't see anything odd although I'm no expert there.
I don't know of any other way to get these files across. The WD Cloud software is hopeless and not fit for purpose in my view. Would a command line xcopy batch file be better? Or third party stuff?
View 5 Replies
Mar 16, 2016
What's the difference between using the backup facility on windows 10 to a usb, to simply copying the c: drive to a usb?
View 2 Replies
Mar 21, 2016
Since I Upgraded my Laptop from windows 8.1. File transferring from Pc to any USB drive becomes very slow. Like in windows 8.1 the speed was 25 Mb/s to 70Mb/s, but in windows 10 it never gone above 15 Mb/s.
View 1 Replies
Feb 5, 2016
I use a 2 drive set up, a small solid state for my operating system and whatever game I'm currently into, and a 2TB storage drive.
My storage drive (D:) bombed and I took it in for data recovery. The tech saved about 1.3TB of 1.6 used. He put the image onto my new drive and got it going again. However when I try to access explorer or anything pertaining to D: it hangs for about 45 seconds before giving me access. I ran CCleaner first off to knock out registry entries that lost their home but haven't seen any improvement.
What else should I do to get this thing back in order? I'm on Windows 10.
View 4 Replies
Aug 6, 2015
I'm using an Intel SSD 240GB 520 series. Always loading very fast, i.e., about 8 seconds from cold boot.
Since windows 10 is installed, boot time is about 20 seconds and desktop icons take some time to refresh and load their images.
Regarding the boot time: I've narrowed it down the an unexplained read/write access on my external HDD eSATA which is used for backups, though currently all backup process are stopped.
When I remove / turn off my external HDD, boot time is about 8 seconds. I can't figure out why all of a sudden it required this access to this HDD.
As for the slow icon refresh.. how to fix this.
View 4 Replies
Oct 5, 2015
I am using Windows 10, and I am trying to copy one folder to another folder using File Explorer. If I click on a file folder, I find that the "Copy to" and "Move to" icons are both greyed out. The only option that I find available is the moving or copying of individual files. I need to move folders with a lot of files and sub-directories in them.
View 3 Replies
Jul 18, 2015
Is it at all possible to take the OS, already installed, from your PC and put it onto a USB? I plan on getting Windows 10, but want to be able to revert to Windows 7 if I don't like it. (I don't have the computers disks, as it was a hand-me-down birthday present from my older sister.)
View 1 Replies
Sep 1, 2015
I have a gaming rig I bought a month ago. It wasn't set up right, so I'm formatting the drives and starting from scratch. I'm trying to copy 60GB of stuff to a external drive before I wipe it. It's been going for about 6 hours now and stuck at 99%. It says that there is 0 bites remaining, and 25 seconds. It's stuck there and won't change. Should I just cancel it, because 0 bites are remaining I assume everything is there.
View 1 Replies
Aug 10, 2015
I have just upgraded to Win 10 but now when I try to save pictures from my Nokia it says access denied, even the Nokia suite does not sync? I tried to use snipping tool to capture the dialogue box but I can not save that either, tho I have copied it below. I have lowered UAC status, but that does not work?
View 9 Replies
Jul 30, 2015
I got my free upgrade to Windows 10 and I tried installing it. But it got stuck at 24%, copying new files 83%.
View 2 Replies
Oct 20, 2015
Is there a rugged copy program that can copy a partially corrupted file (*.mpg) from a CD/DVD onto your H/D? What happens is that when the normal windows copy operation encounters that portion of the DVD that is faulty, it tries over and over again (endlessly, it seems) and then just hangs and I have to reboot, forcing that irritating wait for it to scan the C and D drives on reboot. This occurs with any program I try that attempts to read the entire file from the DVD, such as PowerDVD, windows explorer copy, Media Player, windvd, dos copy, etc. I assume it is because a cluster with a faulty cyclic check is encountered, and the windows read operation can't just accept the data anyway and proceed, but, instead, keeps on trying to reread and getting the same cyclic error over and over again.
What I need is a read option that "accepts" the error, transfers the bad cluster as it came across (errors and all), and then continues until it reaches end of data. I get this when some of my home-recorded mpg movies hang up somewhere in the middle, but, if I know in advance and skip over the bad part, the remainder of the movie plays just fine. I need a program that will ignore the cyclic error and just go on. I know we had this back when I did mainframe programming (the ACCEPT option), so I wonder if there is any windows program that does the same for mpeg files on CD's or DVD"s.
View 5 Replies
Jul 30, 2015
I had reserved a copy of windows 10 and i was able to download it through windows update. once it is downloaded i was asked to restart for updating. copying files stuck at 0% for 5 min and windows 7 ultimate x64 rolls back.
I can even see an error message in windows update page shows Windows 10 Pro installation failed error 80070006
View 4 Replies
Nov 5, 2015
Even though I had only 1.3GB used on a 32GB SD card, I could not copy a 7GB file from my C-drive stating there was not enough free space. Why and what to do.
BTW - the sd card was NOT formated in FAT32 and was formated in the NTFS.
View 3 Replies
Jun 14, 2015
Followed the tutorial, extracted the iso. Ran set up. How long should I let it stay at 0%
View 3 Replies
Jan 5, 2016
I'm recently upgraded form windows 7 to windows 10. I'm facing the annoying issue that windows explorer steals the application focus after it finishes copying files and comes to front. Any option to disable this behavior?
View 1 Replies
Jul 30, 2015
I tried updating my Win8.1 to Win10 twice.
The first time, it hung at 26% total, 89% copying files. Then it bricked my system completely so I made a clean install of Windows 8.1. There was nothing else installed than Windows & Updates.
Tried to update it with a stick made by the Media Creation Tool --> Stuck at 23%, 77% copying files.
I tried everything: Disabled Network Adapter, pulled all Cables (only mouse left) out, I also detached my second HDD.
I am trying to install Win10 on my SSD (Samsung 830 Pro, 130GB). I am running a Z77 Chipset.
I'd love to install completely new with the Image but that doesn't work because of the activation later on..
I'm stuck with a fresh Windows 8.1 install now, that's not really what I wanted. I'd love to update to 10 since I had it as a Insider too.
View 1 Replies
Dec 17, 2015
I have made several attempts to upgrade my desktop from 8.1 to 10. Each time the install freezes at the "copying files = 3%" point. When I reboot the system returns to my 8.1 setup and shows the above code with this explanation. "Installation failed in SAFE_OS phase with an error during APPLY_IMAGE operation"
View 9 Replies
May 20, 2015
First time running into issues with my SP3. Was able to download the latest build without any issues. Restarted and the overall install is 18% (blue ring has disappeared) and the Copying Files step is stuck on 63%. Been like that for 15-20 minutes or so. Should I wait it out or try to shut my Surface off?
View 5 Replies
Sep 8, 2015
[URL] .... To make it easy I have made a video showing what the problem is. See description for more vital info.
View 1 Replies
Jan 4, 2016
With Windows 8, if I copy files or folders from one disk to another, a window appears which shows the progress. This is very useful. Windows 10 does not show this window. Is there a way to make it appear?
View 3 Replies
Jan 28, 2016
With Win7 I used to open one external drive, then through My computer locate the other drive. I would have each drive on its own window. I could then select relevant files on one drive copy and paste into the other drive. With Win10 if I click on File explorer I can open one external drive, where can I locate the other drive to put in a separate window. If I click on the other drive, it just opens it in the same window. Win7 and previous versions used to be so simple.
View 5 Replies
Jul 29, 2015
Windows 10. I'm at the "Upgrading Windows" screen and it's been stuck at 25% (copying files 84%) for over an hour. Is this normal?
View 7 Replies
Dec 1, 2015
Recently I had to reinstall Windows 10 on my laptop. Earlier I had downloaded and installed many apps from Windows Store. I have a copy of C:Users{user}AppDataLocalPackages with me.
Is it possible to get back the apps by copying the entire folder to my machine? Is there any option to get back the apps? Or should I download and install them once again?
View 1 Replies
Jan 20, 2016
I just got a new 8tb external drive and this started happening. 2.5 gb file mkv..It'll have a burst of write speed completing 60-80% and then slow all the way to 0 and just trickle the rest, even though it fluctuates from as low as 5 up to 30-50mb until it's done.
View 2 Replies
Nov 12, 2015
Windows 10 In Windows Explorer, I right-clicked on C: and went to Properties and then selected the Security tab and edited the permissions to Allow Full control and it ran for a long, long time. When I re-booted the computer it works fine until after the Sign In screen then the screen goes black. I have a cursor and if I hit Ctrl-Atl-Delete I can select Task Manager but then the screen goes black again. I can boot into Safe Mode with Networking and I can get a Command Prompt in Safe Mode. I have looked at ICACLS but I'm not sure how to use it to re-set the permissions back to normal Windows 10 settings.
View 4 Replies
