BSOD :: While Turning On Computer - Multiple Minidumps Accumulated
Jan 19, 2016
I've gotten two BSODs in the last month since I've built this computer (most recently today; last one about 3 weeks ago). But when I went to use bluescreenviewer, there's been over 10 minidumps in the last month. So I've uploaded my stuff here....
As a note, the BSOD seems to come on as soon as I turn on the computer, right after the blue windows logo comes up (I'm on Windows 10). I haven't gotten a BSOD while I've been using my computer or doing anything else.
View 9 Replies
Similar Messages:
Aug 29, 2015
After maybe 10 minutes, I get a complete freeze and I need to restart my computer. After many attempts of restarting, it usually works fine if it doesn't freeze in the first half an hour. I attached the log.
View 9 Replies
Aug 4, 2015
After shutting down my computer every night, at some point during the night the computer is randomly turning itself on. I have not changed anything that would indicate that this should occur. It didn't happen when I had Windows 8.1 and now that I have Windows 10 it does happen.How to fix it?
View 1 Replies
Aug 13, 2015
So ever since I updated operating system to Windows 10, my HP Pavilion computer has been shutting down with no warning. And now my computer won't even turn on.
My desktop does not overheat, the CPU and the Memory does not go over 50%, have not installed any new programs since we've been using Windows 10. Right when I try to turn the computer on it goes to the HP logo screen and it turns off automatically.
Computer: HP PAvillion p7-1449 Desktop PC
Model#: H4A14AA
Serial#: MXX2430CQZ
Processor: AMD A10-5700 APU with Radeon HD Graphics 3.40GHz
RAM: 10 GB
System type: 64 bit OS x64 based processor
View 1 Replies
Jul 28, 2015
I have a weird error using Windows 10: I cannot change / adjust brightness at all. I have the latest updates for every drivers, programs and all, not sure why the system does this. Sometimes the screen brightness is 100%, sometimes just 50%. Not sure if the Catalyst Control Center is to blame, but I really need a quick solution, and until now I found none.
View 3 Replies
Aug 4, 2015
I've set up screen saver to show my pictures. It works fine during the day. If I turn off my computer at night and turn it on in the morning the screen saver does not work.
View 3 Replies
Jan 1, 2016
When I turn on the computer windows won't start. It starts to load then I just get a permanent black screen, which doesn't change until I boot the system, then it happens again.
View 11 Replies
Feb 29, 2016
I bought my Razer Blade around November last year, and I automatically upgraded it to Windows 10. Since then, I've encountered the occasional glitch wherein I would run a game (usually either Heroes VI, but it does this with other games as well) and I would end up with a blank black screen. The keyboard is lit, and sometimes, not always, there is no audio playing. Ctrl+Alt+Del doesn't work and I have to spend 5-15 minutes hard restarting my computer because when it restarts, it puts me back in the same state.
This went on maybe 2-3 times per week, until today where it happened to me again, but it took me around an hour to get it started up again. At first, I figured that it might have been my fault, and proceeded to download all the new drivers and uninstall, then reinstall all programs such as Nvidia, Intel and C++, but the problem persisted, throughout each mandatory restart. (Yes, I have seen the black screen on start up error, and it's not related to mine. I see no mouse. One thing to note is that my keyboard lights up when I turn the computer on, blacks out for a second, then lights back up again during the times that it does NOT display the Razer symbol upon opening.)
I'll attach my dxdiag.
I got it to work finally. What I did was go to Geforce control panel, went to 3d settings then manually routed everything to use the Nvidia, instead of using the generic setting. It fixed itself after doing that.
View 4 Replies
Aug 14, 2015
Recently i've updated my pc to Windows 10 and now it keeps crashing/hanging quite often and mostly while im in games.
Basically the "shutdown sound" plays, PC freezes, monitor goes black, keyboard and everything else switches off but apparently the pc continues working since i could hear teamspeak in the background once. Nothing else works and the only thing i can do is hard reboot. Unfortunately because of that no minidump is created and nothing is mentioned in windows event journal (except unexpected shutdown). Its almost as if PC switches off videocard and monitor and all peripherals but doesn't reboot.
I've run several hdd tests (crystal disk info, hdd tune pro, acronis disk doctor, western digital hdd tool) and 2 of those (crystal disk and hdd tune pro) showed 1 bad sector in a non system drive while the other two showed healthy/fine disks. My system is on ssd drive which is healthy according to all 4 tests.
I've also tested RAM on memtest86 and it did not found any errors in one full pass though i realise that it might take several passes to show errors. I've also run driver verifier and checked all non system drivers but again did not get any issues.
Additionally i've encountered some other issues after updating to Windows 10 which might or might not be related to the issue above:
1) Videos in media players as well as in flash/youtube sometimes stutter. This never happened before and it seems to be related to higher CPU or disk usage, even though previously videos did not stutter even under load.
2) Some software like lcdhost, logitech gaming software, aida64 behaves strangely - sometimes applications hang, sometimes they do not load, sometimes they unload. I've actually had one BSOD related to AIDA64 which produced minidump but it seems to have been fixed with the beta release.
3)Windows event journal mentions some issues with winnit and service control manager/_session1.
4)Nvidiabackend process keeps taking up to 40% of CPU power occasionally. Before updating to windows 10 i've never had that issue. Killing the process results in "nvidia geforce experience" not loading and then the process restarts anyway.
Im not sure what to do next since i've checked and tested just about anything.
View 9 Replies
Sep 15, 2015
I edited the BIOS settings to try and enable my keyboard and mouse and wake my computer from sleep, however now I am having the problem that moving the mouse/using keyboard also turns on my computer when it is powered off.
Is there a way to get my computer to wake, by only click or typing any key (not moving mouse), but at the same time, keyboard and mouse not affecting anything while the PC is turned off (only being able to press the power button on the PC tower to turn it on from shutting it down)?
Here is a photo of my BIOS settings currently. When I have "Resume from S3/S4/S5 by USB Device" enabled, the computer turns on (from being shut down) by moving the mouse/clicking/hitting any key on the keyboard. When it is turned off, the mouse or keyboard don't do anything while the computer is off or asleep.
View 9 Replies
Nov 9, 2015
I've experienced multiple BSOD's in a while now. It occurs several times every day. I thought it was an issue with my graphics card, since it often occured using Adobe Illustrator and other GPU needing applications. Today I replaced my graphics card and I got a BSOD a few minutes later.
I've attached the BSOD file.
KELLMANN-CRH-09-11-2015__83443,81.zip
View 1 Replies
Jan 19, 2016
I purchased a new NUC6i3SYK last week. I have installed a 250gb Samsung evo 850 M.2 HD and 1 8gb stick of Corsair PC4-17000 DDR4 Ram.
Windows 10 is a fresh purchase and install downloaded direct from MS.
The Nuc worked fine with both the HD and Ram being recognised and W10 installed fine. I loaded the drivers from the Nuc support page and then updated Windows. Everything still fine. Then I proceeded to install other programs and went to bed.
Next morning the PC had crashed and failed to restart. After searching the net for possible cause I decided to reinstall Windows 10. This time i didn't load any drivers and the PC was NOT able to connect to the Internet because I thought one of the updates may have cased the crash.
PC was still unstable and crashed often to the point it was in a BSOD loop. I then reinstalled Windows 10 again and this time I installed the LAN driver only and Windows 10 updated itself. It stayed on for 12 hours and has now gone into a BSOD loop again.
The BSOD error message changes but the main ones seem to be
Memory_Management
irql_not_less_or_equal
0xc000021a
Throughout this process I have:
Run Memtest86 for approx 20hrs with no errors
Performed a disk check
Installed samsung magician to confirm HD firmware is the current version
Updated the BIOS to current version
View 9 Replies
Dec 16, 2015
I've had a look at some of the forums which seemed to have the same problem as me (perhaps for different/same reasons). Since updating the BIOS manually 3 weeks ago, I've been having multiple BSOD and each time the reason appears to be different. However, there are only 4 recorded BSOD in minidumps (I've had a lot more than that... but I don't know where it's gone).
View 3 Replies
Aug 5, 2015
I upgraded my (ageing) Dell Studio XPS laptop from Windows 7 to 10 on day one and have had multiple BSOD issues ever since. They have included:
IRQL_NOT_LESS_OR_EQUAL
MEMORY_MANAGEMENT
DRIVER_CORRUPTED_EXPOOL
SYSTEM_SERVICE_EXCEPTION
...and many more. I have attached the requisite zip file below.
I have conducted the usual Google searches and tried a couple of suggested solutions. Uninstalling Norton 360 seemed to reduce the frequency of the problems; as did deleting an unknown printer that was showing up in Device Manager. But although the crashes are less frequent, the problem clearly still exists.
I would ideally prefer not to have to do a completely clean install, given the volume of data I would need to temporarily shift off my machine.
View 9 Replies
Nov 15, 2015
When im playing dota2, i m running marvel heroes 2015 as well, then BSOD came up, the error message was WHEA_UNCORRECTABLE_ERROR. Attached is the file needed. Not sure why the dump file cant be uploaded.
View 9 Replies
Mar 5, 2016
Windows 10 Pro 64-bit
Nvidia GTX 570
ASUS P8Z77-V
Intel i7-3770k 3.50 GHz
Starting Monday (I think) I started getting artifacts all over my screen then my computer would crash and restart (sometimes the artifacts would persist during the boot screens, which would force multiple restarts before I could even log into Windows). I was not in any situation with heavy loads on either the CPU or GPU. This happened multiple times. Eventually, it started giving me a BSOD and one of these three codes: "DCP WATCHDOG VIOLATION", "TRD VIDEO FAILURE", or "DRIVER IRQL NOT LESS OR EQUAL". Of all the dumps I got, the consensus from WhoCrashed is that it's the Nvidia kernel driver nvlddmkm.sys (in some cases it was dxgmms2.sys). My drivers were up to date at that point.
Two days ago I was told by the Nvidia chat "support" to use Revouninstaller and roll back my drivers to those from December, which I did. It took a lot longer, and it didn't actually crash, but I got artifacts again, the screen froze then flickered and came back, and then an error message came up saying that my Nvidia kernel driver had stopped working and recovered. At that point, I turned off for the night and went to bed. Yesterday I was able to use my computer for several hours without any problems, but just as I was about to turn in, it artifacted and crashed with a BSOD and one of those three codes above (can't remember which).
I ran a full scan using Windows Defender. It got about halfway done, then stopped. I couldn't start it again (gave error 0x8007139f). After a restart it would scan, but I'm convinced it didn't finish again (I was working on my laptop while it was scanning so I wasn't paying complete attention, but what took 30 minutes to get halfway before, "finished" in less than 10 minutes). I'm not convinced it's an infection yet, but I guess it's another things to check for if it turns out WinDef isn't cutting it.
NLGR-2012-Fri_03_04_2016_224348_10.zip
View 7 Replies
Jan 7, 2016
My PC has recently started to freeze and reboot itsself randomly, I can't figure out what is causing the issue since there are no error messages etc after.
View 4 Replies
Oct 29, 2015
I've been getting a lot of BSOD errors recently but always within a minute or so from starting my computer up from sleep. The messages seem random, but one time I noticed graphical glitches before the BSOD so I have a suspicion that it may be related to the graphics card/drivers. If it doesn't crash within the first few minutes, it seems to be fine.
View 1 Replies
Aug 9, 2015
I started my windows 10 update around 10:00 last night. For awhile it seemed stuck in suspend mode (black screen, monitor light orange, computer light still on etc) and I was worried but eventually I got the update screen and it went from 30% to 56% in around 30 minutes or so.The bottom screen said my computer would turn off and on again multiple times. But then later it went back to the "suspend mode" again right before I fell asleep and now 9 hours later it's still stuck like this!! No update screen no nothing. Just sitting is a suspend mode (I think!) And not allowing me to do anything.
View 3 Replies
Feb 9, 2016
I recently built a computer about two weeks ago. Everything had been great up until today. These are the following error messages that occur about 10 seconds after seeing the windows 10 desktop and all the way until the starting of windows.
Bad pool caller
Bad pool header
System service header
Dpc watchdog violation
Kmode exception... (I couldn't get the rest)
I have about 10 seconds of desktop before a error message or a freeze. I've tried safe mode and it locks up, ive tried trying to repair windows from the boot disk and it loads forever or locks up. Maybe the two week old hardrive has failed?
View 1 Replies
Dec 22, 2015
I got multiple times BSOD with info Kernel Security Check Failure. I work on laptop with additional usb mouse, usb keyboard, usb cooling pad and second display. I noticed that if I have connected my second display than Windows fall in random time (often after waking up). I saw into records in Event Viewer and there are pack of critical events and all about Kernel-Power (Event ID 41). After disconnected second display it seems to be ok. Second display is LG Flatron L1972H. What can I do with it.
View 6 Replies
Oct 2, 2015
I know it says to install and run the program in the sticky but i can't get into windows
PC has been running fine until recently. I have been getting occasional random BSOD errors over the last few days which I didn't think much about, but today I started getting a lot of them, occurring a few minutes after boot. After a few restarts I then started getting a black screen with cursor when the login screen should appear. The jingle still sounds. Some of the BSOD errors I wrote down.
Bad pool header
PFN corrupt
Memory management
0xc000021a
The black screen will not respond to CTRL ALT DEL etc. I tried following steps on some posts to enter password blind by pressing space /ctrl but this does not work for me. The screen stays on indefinitely.
I have also tried chkdsk on C drive. No errors. I tried system restore, but it says I have no checkpoints. I thought I did have it switched on but I guess not.
I tried start up repair but it says it cannot fix the problem. I don't have a system image either (I know, I'm a fool). I tried safe mode and low res mode. Same black screen just with a larger cursor.
Apart from reinstalling windows again, i can't think of any other things to try.
View 9 Replies
Jan 9, 2016
I keep getting blue screens randomly with different messages, including KERNEL_INPAGE_ERROR, CRITICAL_PROCESS_DIED, and more. It doesn't seem to be associated with any particular app or thing that I do. This morning, I woke up to find that is BSODed in the middle of the night for apparently no reason.
I have tried SFC /SCANNOW (corrupt files can't be fixed), DISM restore_health, reinstalling Windows, check disk... You name it.
View 5 Replies
Aug 3, 2015
Essentially, ever since I upgraded, my computer (which has had its issues in the past, admittedly) has been crashing repeatedly, multiple times per day, exact amount varying with what I'm doing. The most common error according to WhoCrashed is Video_TDR_ERROR, followed by DPC_WATCHDOG_VIOLATION, and HAL_INITIALIZATION_FAILED.
I've noticed it crashes more often when playing a flash video or similar streaming, followed by media players, and then even sometimes when just browsing the web. The majority of the time, it will freeze first, repeating a sound loop varying from a split second to a full second or so until it finally bluescreens.
I've taken the following steps so far to try fixing it, after some google searching:
*Rolling back Nvidia drivers to .30
*Completely removing the nvidia drivers with the uninstaller utility, and then reinstalling them again
*Reinstalling sound drivers and wifi drivers.
*SFC checks, and DISM even when nothing was found
*Hard drive repair (Check disk and seatools)
*Virus scans
But no luck so far. I'm assuming it's driver/software related based on what I know of the errors and the timing of it all.
As a side note, I can't change back to 7 right now, it's a long story that basically comes down to the files getting deleted when they shouldn't have been. I'd also prefer to avoid Restoring, as that removes all programs (Effectively, I don't have any from the Store), which defeats the purpose of upgrading instead of doing a clean install, unless someone knows of a 'repair' installation option like Windows 7 had, that keeps ALL programs installed, but I can't find anything like that.
Attached the generated archive.
View 9 Replies
Sep 5, 2015
I recently built the PC I am currently experiencing this issue on. I have built several gaming PC's in the past, but never have I experienced any consistent issues such as this.
The PC Speccs are as follows:
CPU- AMD FX-9590 Vishera 8-Core 4.7GHz Cooled with a: CORSAIR Hydro Series H75 Liquid CPU Cooler 120mm
MOBO- ASUS M5A99FX PRO R2.0 AM3+
GPU- 2x EVGA GeForce GTX 970s in SLi (4GB GDDR5)
Power Supply- COOLMAX CUG-950B 950W ATX12V v2.3 EPS12V v2.91 SLi Certified
RAM- 16GB HyperX DDR3 SDRAM
HD(s)-1x Western Digital 1TB 32MB Cache, 1x Seagate Barracuda 1TB 7200 RPM 64MB Cache
OS- Windows 10
I built the PC in mid February of this year, 2015. This particular issue started happening consistently (daily basis) in June. While gaming, my PC will all of a sudden, at random, lock up completely. I try Alt+f4, Ctrl+Alt+Del, and Alt+Tab, but nothing responds. The PC just stays like this until I'm forced to do a hard-reset at the tower.
I've tried just about everything I can think of to resolve this problem. I thought since it only happens when I game that perhaps it's a cooling issue and my system is overheating. However, I've ran a slew of programs to monitor heat and none show anything abnormal.
Many articles suggested malware or spyware might be causing the lock-ups. So I've chosen to clean my system daily but the issue still persists.
At one point I was able to eliminate the problem completely for nearly 3 weeks by changing my power settings from 'Power-Saver' to 'High-Performance'. Unfortunately, the issue came back. Asus Suite II regularly reports power fluctuations which leads me to believe it might possibly be a failing Power-Supply but I'm just not sure.
Windows Event Viewer lists a myriad of different application and system errors each time it happens. Recently however, it is always showing errors from Microsoft.Windows.Store, DistributedCOM, and Service Control Manager, all coinciding with the exact time the system locks up and becomes unresponsive.
It's worth noting that this system started out running Windows 7 Home Premium and just recently upgraded to Windows 10. The problem existed regardless of OS.
View 1 Replies
Feb 10, 2016
I am using Dell inspiron laptop (pretty old one) which started acting weirdly. Upon examining, there was a problem with HDD so I had it changed.
As soon as I got new HDD installed and installed Windows 10 on it, computer started acting weird again - slow startups, random freeze etc.- but it was running ok and I was fine with it. But earlier today, it suddenly displayed BSOD and crashed when it was idle. Now to the main and the funny part, it does not boot anymore. To elaborate, blank screen appears after BIOS screen (right when the logo of windows should be displayed) and it remains blank for several more minutes before the logo and spinning dots magically appear, it doesnt disappear thereafter.
I figured, I could run startup repair or some other tool to solve the problem by booting from the DVD of windows 10. Now for this one, the logo appears with the spinning dots which disappears after a while like it should. And after it disappears, blank screen persists thereafter. Dumbfounded, I tried booting from a USB stick of Windows 8 I had which gave the same problem.
View 1 Replies
