I have installed a clean windows 10 installation, and i keep having these different BSOD every time my computer is making a cold start = i shut the pc down in the evening and in the morning BSOD starts the day.. the computer restarts, and it works all day long, resetting and turn off and quick turn on again no BSOD.
I have attached my .zip file
BSOD happens only when the computer cold boots from a prolonged inactive state. If the PC is off for several hours and is turned on it occurs. Computer typically blue screens, sometimes it freezes at the bios splash screen where they Windows 10 circular loading icon appears on this Gigabyte. I've seen multiple reasons for the occurrence such as bad pooler caller and irql not less or equal. The BSOD happens once then after the computer functions as normal with no other issues.
Power supply, graphics card, and SSD were both pulled from a previous build with zero issues in that build. New to this build is the motherboard, processor, and RAM.
Ran Memtest86 with no errors for 8 passes but I just realized it was after the initial cold boot BSOD and not going from the inactive state to the test directly. Will be swapping out the RAM at Microcenter today just to eliminate that possibility.
Windows 10 was a clean install but it happened on the previous install, BIOS is flashed to the most recent release.
I got a custom built pc for christmas and it has been getting BSOD's since it was built and they have only been happening on cold boots, and the file that is having problems is ntoskrnl.
View 9 RepliesIt has been doing this EVERY time I restart or start up my computer. It is very annoying as it clears some of my apps. It also says it is putting me on a temporary account or something like that.
View 1 RepliesI have a custom intel/nvidia mini-itx build with win 10 that has been consistently BSOD on cold startup with various error codes. Its a really annoying problem. No drivers have been identified by who crashed.
The system is completely stable once I am able to log in to windows, even through intense gaming and maxed heaven benchmarks. Nothing is overclocked and all drivers/BIOS are up to date. I have tried disabling Intel smart connect in BIOS at suggestion of another BSOD thread here but did not solve. I have clean installed win 10 from tech bench multiple times to try and fix the problem. Windows SFC finds no integrity violations.
Gigabyte z87n wifi w/newest F6 BIOS
Intel i7 4770
Nvidia GTX 560 Ti
DESKTOP-CVKNMNQ-Mon_02_22_2016__92933_59.zip
Whenever I shut down my computer, I always have this problem. The Windows 10 insignia and the loading circle beneath will appear, then the screen will fade to black, and then my monitor says it can't detect my computer. I then have to unplug my computer from the outlet because I can't shut it down by pressing the power button. When I start it up again afterwards, it will start perfectly fine. And whenever I try to change the boot configurations, it automatically resets itself to the previous version.
View 9 RepliesWhen performing a cold start, the windows logo appears but nothing happens. If I reboot (Hold in the start button) and wait a few seconds, then repress the start button, Windows-10 loads. Why is this?
View 3 RepliesEach time I click on the tile for the start menu a message comes up saying critical error and will try to restart going through the same process over and over. I am able to get online using my security password program but cannot use any menu options and cannot get into setting to restore .
View 1 RepliesSo I want to lock down a user account in a specific time or anytime that he'll not able to access the PC until morning, cuz my cousin been using my PC until midnight like there's no end and he'll just use it until 1am or 2am then sleep after. I have Windows 10 btw
View 1 RepliesI've tried all the generic ways, using powershell, using Tweaking WIndows Repair Etc.I don't want to keep restoring windows 10 everytime it happens. I remember I fixed this once by using regedit.
View 1 RepliesWhen I log in, I want to go directly to the start screen rather than the desktop and having to click the windows icon/button.I have tried right clicking on the taskbar->properties->Navigation Tab and the only option there is the option to replace command prompt with windows powershell.
I have tried setting the group policy User Configuration->Administrative Template->Start Menu and Taskbar->"Go to the desktop instead of start when signing in" to both disabled and not configured with no effect.how to get the other options to show up in the Navigation Tab of taskbar properties or how to set the start screen as the default when signing in?I am on Windows 10 Pro build 10240, upgraded from 8.1 Pro and am logged in with an administrator account.
I'm wondering if there is a way I can add Control Panel to my start menu in the same area where Settings is currently located.
View 4 RepliesRandomly when browsing the internet I'll get bluescreen's 10-20 minutes in. I haven't tested many things but I have updated a couple of drivers in spite of what I thought may have worked..
View 1 RepliesAnyway to make start button list all my applications without having to to click all apps and remove the abc categories?
View 2 RepliesI'm loving Win10 so far! Real improvement on Win7 (and most certainly on Win8, which I hated so much I went back!)
One thing I have noticed, that I can't seem to change... is how you set it so that icons in the start bar, go full sized once you open them? I liked that feature in Win7, as it was quicker to view what was open (without having to "read" the icons to work out what was what)
(I've attached a pic of what I mean)
Here are minidumps of the past several bluescreens, and a full memory dump of the most recent one. I've been getting these for various reasons - I already fixed a few problems with programs chewing up hard disk and causing crashes due to this, but I recently started getting them again at random times and I can't figure out the root cause. Attached is the official folder of stuff from the tool. The event log will include additional unexpected power losses because occasionally it completely freezes and I have to hard reset. I'm hoping it's not hard-drive failure because it often fails for different reasons.
View 9 Repliesit has given me several reasons for BSOD, such as: unexpected kernel mode trap security check failure and others...
I am running in safe mode now without problem for quite a while so I guess it is a driver problem, I hope?
here is my debug thing
I recently bought a HP Probook and within days I started getting BSOD - I had it replaced by HP and the same model replacement is now also giving BSOD. I deliberately didn't install anything on it apart from Chrome. I'm getting BSOD all the time now when browsing - it doesn't matter which browser I use. I have the minidump files but don't know how to read them. I've uploaded them...
View 2 RepliesMake an APP start at boot no splash screen in systray, I don't mind editing my registry as i have done for many other reasons in the past...
View 4 RepliesWhile playing a game on my computer I get BSOD IRQL_NOT_LESS_OR_EQUAL, it happens EVERYTIME I go onto the game and try play it..
View 1 RepliesSo now after continuously getting about 8-9 BSOD's back to back while connecting my phone as usb modem , it has started to bother me too much
It occurs only after i connect my 3g phone as an internet modem.
I have included the dump files using dm_log_collector
ABHAY-07-12-2015_203503_72.zip
I recently upgraded a Toshiba A300 laptop (2009 model) from Win7 to Win10. I use a 125GB Kingston SSD as primary and a 280GB Hitachi as a secondary internal hard disk, in place of DVD drive, inside a cradle. This is a single OS installation, no dual boot. When I cold boot (from power on) and after the Bios logo, the "MBR Error 1" appears on screen and stops booting. To bypass I do a warm restart (Ctrl+Alt+Del) and the second (warm) boot loads Win 10. Also booting is ok from a Restart. Again error message appears only after a cold boot.
As a teaser I have to mention that, whenever I remove the cradle with the secondary Hitachi hard disk, the error does not appear during cold boot !!!. That is the error message appears only if the second hard disk is installed. This is an annoying situation only and does not affect any other operation, except booting.
I have updated the files for the BSOD logs. It is a Kernal_Security_Check_Failure about 99% of the time. Sometimes they will happen when I launch a game, when I start playing music, or even when I am away from the computer without anything running. I am unaware of any connection to them. They happen between 5-10 times a day, and it is VERY annoying.... (updated again[and again][and again])
View 9 RepliesEvery since I upgraded to windows 10 and boot my desktop machine I get a BSOD with Bad Pool header. It keeps looping and rebooting with the same error. The only way around it is to go into the bios and save changes and then it allows me to log in. I have disabled fast reboot and still no joy. Attached is a log file with all the relevant info
View 3 RepliesMy Win10 laptop flips out on boot with a blue screen, right before/after you can see the mouse. It never reboots when it says it will. And it seems to blame my graphics card for this, as Catylitst Controll on logging claims that there is no AMD driver or thats its malfunctioning. I have to reinstall it to get my computer working better than a snail's pace, and for Catylist Controll to reconise it.Will get a dump of the error, just gotta restart a few times, as i accidently deleted the error dump and used disk cleaner.
Edit: Error is: , And the dump: W10LAPTOP-Sun_02_07_2016_134851_47.zip
The computer seems very stable right up until I let it go idle. After 4 minutes I get the REGISTRY_ERROR bsod. The system is not over clocked. CPU temps are low. Memtest86(+) runs fine for 8 passes with 0 errors. Disabling the two .NET tasks that start on idle in Task Scheduler made no difference (as per the post with a similar issue). CHKDSK /R requires a reboot and no messages are present on the screen while running but there is no log file generated in Event Viewer / logfiles / application. I ran sfc /scannow and got errors. A reboot and retry did not correct the error. I ran Dism /Online /Cleanup-Image /RestoreHealth and it successfully repaired the system. Subsequent scans with SCF indicate no issues or problems. Not sure if it is relevant but the system has a Samsung 950 SSD as the C drive.
View 9 Replies
