BSOD :: Multiple Error Messages - Corrupt Files Can't Be Fixed By SFC
Jan 9, 2016
I keep getting blue screens randomly with different messages, including KERNEL_INPAGE_ERROR, CRITICAL_PROCESS_DIED, and more. It doesn't seem to be associated with any particular app or thing that I do. This morning, I woke up to find that is BSODed in the middle of the night for apparently no reason.
I have tried SFC /SCANNOW (corrupt files can't be fixed), DISM restore_health, reinstalling Windows, check disk... You name it.
View 5 Replies
Similar Messages:
Jan 22, 2016
I fnd that I have the same error message appearing at about 10 second intervals (on one occasion over 21000 were logged). Details below:
Log Name: Application
Source: ESENT
Date: 22/01/2016 15:32:30
Event ID: 490
Task Category: (1)
Level: Error
[Code] .....
View 1 Replies
Jan 14, 2016
I have a fresh install of Windows 10 Home on a factory built PC (Chillblast) that was running OK under Windows 7, but is now Blue Screening on Windows 10.When I boot the PC from cold about 1/3 of the time it will blue screen. The messages vary. Sometimes it will say IRQL Not less or Equal, or Page fault in non-paged area, or Memory Management.
The messages always happen pretty much at the exact second that you would normally get the logon box up. It never Blue screens when I'm actually using the computer, even if I'm hitting it hard with games. It also never blue screens on a reboot. Only when it's booting from power complete power down.I suspect that it's software rather than hardware, maybe a driver?
The only message in the logs is that the computer as recovered from an unexpected shutdown. It rarely creates Dump rile.I thought that it might be bad RAM. I have two 8GB chips. Both are the original chips that the computer was sold with. If I try with one chip in it runs perfectly. It doesn't matter which chip, or which slot the chip is in. It runs perfectly with all combinations. If I put them both in 1/3 of the time BSOD.
I've run Memtest86+ and it didn't find any problems. I've also run the System File Checker and it didn't find anything.As this is a fresh install I don't have much loaded. It started blue screening with only the basic software needed to run my hardware, and an Anti-Virus (Avira) loaded.
Windows 10 is installed on a totally new disc, straight out of the box (Sandisk SSD).Other than the hard disk and a soundcard, the PC is pretty much a factory build, with a factory configured motherboard. It's not overclocked, and I haven't tinkered with it.Before I installed Windows 10, I occasionally had a Stop 0X000008a error, but I don't know if that's relevant or not as it was a different OS on a different hard disk.
View 9 Replies
Aug 3, 2015
I ran "SFC /scannow" and got an error saying the System File Checker found errors but couldn't fix them. Afterwards I ran "DISM /Online /Cleanup-Image /RestoreHealth" and DISM threw the error 0x800f081f saying that the source files could not be found.
I then ran "DISM /Online /Cleanup-Image /RestoreHealth /Source:H:Sourcesinstall.wim" to direct DISM to my windows 10 disk, but this also didn't work.
I don't know what to do short of reinstalling Windows, I've attached my CBS and DISM logs in a .zip file below (the CBS log was too big).
View 2 Replies
Oct 3, 2015
I am running Windows 10 on a desktop computer about a year old. Custom built by Hard Drives Northwest. Dual boots Windows 10 and 8.1. Windows 10 is the default, which replaced Windows 7 that dual booted with Windows 8.1. Windows 10 seemed to run quite well at first. Recently, maybe for a week or so, I have found my mouse slowing to a stop, restarting for a while, stopping again and repeating this cycle for a while, then the BSOD with various messages including :
DPC_WATCHING_VIOLATION ; CRITICAL_STRUCTURE_CORRUPTION and FAULTY_HARDWARE_CORRUPTED_PAGE
Those are the messages I catch. Often the computer just restarts when I am not around so I don't know the error message. I am writing this is safe mode as the computer is nearly unusable in normal mode. Windows 10 is fully updated, I have checked drivers for graphics card, mouse and monitor and all are up to date. Attached is my data log ZIP file.
View 4 Replies
Dec 12, 2015
Lately I have been getting hard lock ups on my desktop. I had no real software or hardware changes but I did notice the crashing was only happening during GTA 5. The locks up would never have an actual BSOD or error message just a hard freeze requiring me to restart or the system would restart itself.
Now it started happening even without running GTA 5. My cpu temps were a bit high (98 was the max) with GTA 5 so I thought that was the issue, but when idling + my hyper 212 evo, I get 30 deg temps and still crashed.
Interestingly I also crashed when using the dmp application to make the mini dump I uploaded to analyze.
View 9 Replies
Feb 1, 2016
I have a Sony VAIO laptop, model SVE14A290X, which had Windows 8.1 installed on it. I waited until late December 2015 to upgrade to Windows 10, and followed all of the instructions and driver downloads given on the Sony website.But since then I've been having regular freezes and BSODs, once or twice a day, sometimes more, with varying error messages. I took my computer to the local Microsoft store and they said I needed to do a clean install, which they said would solve my problems. So they did that for me, but since then I've been having the same problems, with the same kinds of error messages. I have followed your instructions and attached the zip file.
View 9 Replies
Oct 12, 2015
I installed Win 10 on my home server and it keeps crashing all the time with random BSODs (with a bunch of different error messages). Before that, it was running fine on Win Home Server 2011.
I tried a bunch of driver combinations (the default ones, the ones from ATI, the ones from Asrock, ...). Unfortunately, nothing solved the issue. Memtest is OK.
The hardware is an old-ish ASRock A780GXH/128M motherboard with a Phenom CPU.
View 4 Replies
Oct 17, 2015
Have tried finding a solution on the internet but so far no luck.. I keep getting BSOD when downloading (and only when downloading) files. L1C63x64.sys ...I have attached the dump files.
Everything seems to point at my network adapter driver. Which is from Atheros. Alas they do not have drivers for Windows 10. Anything I can do here? I already tried driver verifier and it doesn't seem to be a 3rd party problem. Also did a memory check and it's not that either..
Uploaded the correct zip ....
View 3 Replies
Mar 10, 2016
My new build is restarting randomly, and unlike with windows 7, there are no messages telling me what happened. What's the best way to view system logs that might have information about crashes?
View 1 Replies
Oct 25, 2015
Earlier today while playing Dying Light, my PC randomly blue-screened with the error "page fault in nonpaged area cpuz136_x64.sys" - After running a malware scan, nothing was found. After that I cleaned my registry with CCleaner. I haven't played Dying Light since then, but a few minutes ago I decided to run sfc /scannow - and It came up with a few files that were corrupt.
CBS.log:
Spoiler
2015-10-25 17:05:02, Info CBS Session: 30478193_851218210 initialized by client WindowsUpdateAgent, external staging directory: (null)
2015-10-25 17:05:02, Info CBS Failed to internally open package. [HRESULT = 0x800f0805 - CBS_E_INVALID_PACKAGE]
2015-10-25 17:05:02, Info CBS Failed to OpenPackage using worker session [HRESULT = 0x800f0805]
2015-10-25 17:05:02, Info CBS Session: 30478193_851228178 initialized by client WindowsUpdateAgent, external staging directory: (null)
[code]...
View 1 Replies
Feb 25, 2016
since i upgraded from windows 7 to 10 i've been getting these random restarts, after fixing the geforce experience the restarts have been happening alot less though.i haven't made any physical upgrades to my pc since windows 7 so i'm asuming this is a software issue or something.
View 1 Replies
Jan 15, 2016
After almost every update, if I run sfc it reports corrupt files. Sometimes it cures them, sometimes I have to run dism, and this time neither work.
View 1 Replies
Nov 1, 2015
I have run SFC /SCANNOW and a large number of files have been found to be corrupted in Windows 10, and cannot be repaired by SFC. The CBS log is too large to attach, but I have extracted a list of all corrupt files attached.
After looking at similar posts, I downloaded SFCFIX.exe by Sysnative and ran that in an elevated command prompt, but the message I got was that source file could not be found. I have also run SFC in safe mode and also run DISM, but neither solves my problem, and the corrupt files persist.
CBS Extract.txt 27.04KB
View 3 Replies
Nov 7, 2015
I went into the CBS log as stated by the cmd, and these were the only things I could find that were not fixed.
View 3 Replies
Mar 27, 2016
Does SFC /Scannow really work? It always finds corrupt files in all of my systems regardless of the age of the OS install. Out of curiosity, I installed a pristine Windows 10 Pro on a clean, formatted, erased and empty(?) hard drive with no apps installed on a spare laptop . Ran SFC /Scannow and it reported corrupt files.
View 2 Replies
Jan 27, 2016
Randomly when browsing the internet I'll get bluescreen's 10-20 minutes in. I haven't tested many things but I have updated a couple of drivers in spite of what I thought may have worked..
View 1 Replies
Nov 13, 2015
Why am I getting script error messages now I changed to Windows 10? Often when on the web and facebook
View 2 Replies
Oct 21, 2015
Every time I open the Store and look for a video app called Pressplay and click on it, the Store will simply close down and then I'm back on the desktop. This happens everytime. Is this a common problem or could it have anything to do with the specific app I'm looking for?
View 1 Replies
Aug 19, 2015
I've received 5 files from 5 sources, both Excel and Word. Every time I try to open one I get an error message "File is corrupt and can't be opened." I can work on my own files, but not downloads.
I tried the Windows 10 "workarounds" but these didn't work. I've tried to download using both Firefox and Edge, no difference.
View 1 Replies
Dec 19, 2015
As the title says, the start menu wasn't opening so I ran SFC /scannow that found corrupt files but was unable to fix some of them. I then ran RestoreHealth but I got a message saying, "Source file cannot be found". I restart, Start Menu works again but still have corrupt files after an SFC scan. I recently did a clean install of Windows 10 after some non-related issues. CBS log is attached. I'm having trouble determining the problem from the log file.
View 4 Replies
Sep 4, 2015
I ran sfc /scannow in an admin command prompt, however when it completes I receive this message:
"Windows Resource Protection found corrupt files but was unable to fix some
of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For
example C:WindowsLogsCBSCBS.log. Note that logging is currently not
supported in offline servicing scenarios."
I think that it may be somehow related to a few errors happening on my laptop--such as live tiles not working, and the inability to use some apps without crashes.
View 9 Replies
Nov 15, 2015
can some of you do an sfc /scannow and check your results with the November update installed? I always do this when i finish installations, and on 3 computers and 4 installations on them, 2 on one computer just to be sure i am getting corrupt files and struggling with my anger to not go back to windows 7 and get rid of all win 10 problems and MS ignorance. here is my results, many corrupted files in the log.. but is long so i don't post it...
Microsoft Windows [Version 10.0.10586](c) 2016 Microsoft Corporation. All rights reserved.
C:WINDOWSsystem32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log. Note that logging is currently not supported in offline servicing scenarios.
View 9 Replies
Oct 18, 2015
Any way to eliminate the error messages below when my neighbor opens Word, Excel or Powerpoint.
Background: I upgrade from Windows 7 to Windows 10. All went well and there were no problems. They had Office XP with Frontpage (yes that is old) loaded on Windows 7 and it worked fine. When you opened it there were no error messages after the upgrade was completed.
About a week later they wanted a clean install on the laptop because it had been awhile since they ever did that. I do a clean install, Windows 10 Activated successfully so now it was time to reload the applications.
After we loaded Office XP on the machine we started getting theses messages at the point it was loading. Eventually you would get to the application and it was fully functional.
I put the screen shots in the picture included in this post......
View 3 Replies
Aug 14, 2015
It has happened twice since I installed windows 10 in the last two weeks.
I have the default blue desktop in 10 and I also have a rather old ATI Radeoon HD 4600 graphics card, though the driver date in device manager is January 2015.
Whilst browsing facebook on two occasions the screen has just gone a totally blank blue colour, no error messages or anything like that. I have to hard restart, as task manager won't come up, and windows 10 starts fine again, doesn't go thorugh CHKDSK or anything.
WIndows 7 works perfectly on my other partition so not a hardware or monitor problem just specific to windows 10.
View 2 Replies
Nov 13, 2015
just wanted to know what should one do if one gets the error and how does one troubleshoot it properly?
I looked up the log on my system but it's just a really big lump of text.
View 5 Replies
