BSOD :: ( Preparing Automatic Repairs ) Then Screen Goes Blank 3-5 Seconds Later
Feb 10, 2016
I purchased a hp pavilion laptop a few months ago with Windows 10 pre-installed.
I haven't used it for a few days, turned it on this evening and I got a message on boot up saying
"preparing automatic repairs" and then my screen goes blank 3-5 seconds later.
I do not have a cursor and have tried various keys and different ways of trying to bring up some kind of option. I also tried plugging my laptop into my TV to see if it were perhaps the screen that was going wrong.
View 3 Replies
Similar Messages:
Sep 13, 2015
I have tried changing the boot order and using a disc and a USB drive to get Windows to reinstall but it isn't working.
View 1 Replies
Aug 2, 2015
So I upgraded to Windows 10 and I was using it and shut down my computer. Now my computer turns on but won't load anything. It shows the windows loading screen for about 5 seconds and then goes blank and sits that way till I turn it off and restart.
View 1 Replies
Sep 30, 2015
Recently I got a new gaming PC which came with windows 7. The day after i upgraded to windows 10 and it was working fine. Yesterday i was using my PC and then the task bar disappeared so i decided to restart the computer to try and fix it. When the computer turned on again it went through the normal startup process but when it got to the windows logo it said preparing automatic install and then kept looping through startup and the windows logo. I have tried doing the system repair but when I press F8 nothing happens, so right now all i can do on the computer now is access the BIOS.
View 3 Replies
Oct 24, 2015
I have had this loop for 4-5 hours now, and I have not found any fix for it. I am using build 10240. I have tried reverting back to windows 7, and that failed. Tried start-up repair, that failed. Tried system restore and image recovery, those failed too. Even resetting my pc has failed. I have tried cmd commands, and those also failed. I have upgraded to windows 10 via online from Windows 7, and I do not have a disk or another computer to work with. Nothing has even caused this issue. I just booted my pc like any other day and I was sent into this loop. I have a Gigabyte USB 3.0 powered motherboard.
View 9 Replies
Jul 29, 2015
So I finally made a .iso file for W10 Pro x64 and started installing it. Everything went smoothly my PC restarted 2 times. But when it got to 81% (in total) while "Installing drivers and features" it resterted for the third time and then it started giving me the "Preparing automatic repair" and then "Diagnosing your pc" stuff. I was able to launch the automatic reapair and roll back to W7.
View 2 Replies
Aug 12, 2015
I just recently got a new pc it had windows 8 but i upgraded to windows 10 it was good for a week until today, I tried to boot it up and its stuck at the windows logo and then it says "preparing automatic repair " and it keeps on beeping. I tried to find bios but i couldn't find it, i pressed every key but no bios. I then put a windows 8 disk but it doesn't have an option to boot from cd/dvd. Msi motherboard ...
My specs:
msi white gtx960 2gb <- gpu
MSI 760GMA-P34(FX) <- motherboard
View 1 Replies
Aug 11, 2015
I just recently got a new pc it had windows 8 but i upgraded to windows 10 it was good for a week until today, I tried to boot it up and its stuck at the windows logo and then it says "preparing automatic repair " and it keeps on beeping. I tried to find bios but i couldn't find it, i pressed every key but no bios. I then put a windows 8 disk but it doesn't have an option to boot from cd/dvd. Its an Msi motherboard ....
My specs:
msi white gtx960 2gb <- gpu
MSI 760GMA-P34(FX) <- motherboard
View 1 Replies
Jun 16, 2015
I've been trying to update to the latest build for some time now, I'm currently on 9926. The update downloads fine and it also goes through the process of installation fine, up until it's time to restart the computer for the final step, that's where the problem begins. It gets stuck on a boot up loop, it loads to the windows logo and says preparing automatic repair and restarts the computer again and again with the "preparing automatic repair" message. I made an installation disc for 9926 so that's how I'm able to reset the computer but I've also made one for the latest build but I still get the same boot up loop problem. I really want to be on the latest build and I'm worried that I won't even be able to install the official release.
View 1 Replies
Aug 30, 2015
When starting up the screen seems to reboot. windows menus/ bottom menu and program icons mostly dissapear and re-appear.
In the mean time windows is practically unusable. Hard to start up any program.
No error messages appear on screen.
View 19 Replies
Aug 6, 2015
After successfully installing Win 10 it ran without any issues for about 1 day then Edge refused to launch, the splash screen opens for about 10 seconds and then disappears. The only change made to Edge was to import bookmarks from IE. Unsure where to start looking for an answer.
View 13 Replies
Oct 6, 2015
I installed windows 10 in my laptop. But everytime i open it. It will show the desktop icons and all of my apps for few seconds then it will go blank. I cant do anything from my laptop. Its just plain black
View 6 Replies
Feb 10, 2016
I notice that after i run these commands in powershell or cmd:
sfc /scannow, DISM /Online /Cleanup-Image /RestoreHealth, Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)AppXManifest.xml"} .
and run sfc /scannow again, I always get this. It seems like my windows is always corrupted and I think that is causing my to get start menu, search menu, and task bar issues after stand by. What's wrong with my computer?
I have to do a clean install apparently, also the command broke my apps.
Get-AppxPackage -AllUsers| Foreach {Add-AppxPackage -DisableDevelopmentMode -Register $($_.InstallLocation)AppXManifest.xml}
View 9 Replies
Aug 27, 2015
I recently updated my HP to Windows 10. During setup after I logged in, I got the BSOD. I thought there was nothing wrong until I logged in and found out that I didn't have Start Menu access. About 10 seconds later, the BSOD came up again. Now every time I log in, about 10 to 30 seconds after login, I get the BSOD.
View 6 Replies
Oct 27, 2015
it has given me several reasons for BSOD, such as: unexpected kernel mode trap security check failure and others...
I am running in safe mode now without problem for quite a while so I guess it is a driver problem, I hope?
here is my debug thing
View 3 Replies
Oct 27, 2015
Since I've updated from windows 7 to windows 10, the computer occasionally freezes for about 10 to 30 seconds and nothing but the mouse pointer works.
It happens every now and then but mostly a few minutes after the computer has started and then every now and then. If it freezes in the middle of a download for example, the download simply continues after the freeze ends.
I have scanned the PC with numerous anti virus applications such as ESET NOD32, Malewarebytes and Norton.
View 10 Replies
Jan 18, 2016
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
View 2 Replies
Aug 7, 2015
Have the above laptop and when trying to upgrade from Windows 10 I get the dreaded black screen problem.I get to 85% after I few reboots and it hangs at that point. No cursor on screen,clt alt del not working nothing,just blank screen no hdd movement. I tried plugging laptop into TV by hdmi still no screen. Power of laptop and previous version of windows reinstalled.
View 1 Replies
Sep 10, 2015
I am currently running windows10 on a HP tablet. I have it in a docking station, which has a second larger screen attached.
Last night set it up, perfect movie playing on external, able to browse ect on tab. Removed it today, re-docked, no display (blank screen) on external. Reset duel settings, making tab the primary screen.
Now neither screen shows a display, both blank.
View 3 Replies
Aug 4, 2015
Windows 10 installed beautifully and seems to run fast on my Toshiba laptop but the screen flashes every 30 seconds. When it flashes it looks like a small window opens and closes immediately. Any dialogue box open is reset, and there is disk activity. 2 tasks pop up to the top of the list in Task Manager: dwm.exe and explorer.exe. It happens all the time, whether there are any applications open or not.
View 10 Replies
Aug 7, 2015
I have upgraded from windows 8.1 to Windows 10 The upgrade went well and i was able to use my computer initially. After i restarted my computer, i am stuck in Automatic repair loop.
I have downloaded a copy of windows 10 iso image and made a windows 10 USB boot drive. I tried repairing the startup issue as suggested in some of the forums but no joy.
Its a new PC setup three months ago. Sad there was no hardware or app compatibility check before upgrading.
Config: Intel I7 with 16GB RAM. dual boot with Ubuntu
View 10 Replies
Jan 7, 2016
I am facing a problem with my laptop hp probook 450 G1 after upgrading to windows 10 ! After waking up from sleep I found a small blank white window in the left-up side . It last until the next restart pc ! I have updated windows update from setting>update & security > update windows. I have also downloaded the latest version of drivers from hp website.
View 1 Replies
Aug 12, 2015
I'm using Windows 10 and I changed all of my When Computer Sleeps settings and my screen still goes black after about 30 seconds of inactivity. Not really sure why this happens because I changed all of the settings for the screen shutting off to never.
View 6 Replies
Dec 9, 2015
Recently i installed Windows 10 Pro on a Laptop Compaq Presario c700 with an Intel Celeron M530 and Intel GMA 965 express graphics card,when the laptop is idle and my screen turns off after 5 minutes,the Automatic System Maintenance starts right away and for the limited graphic chipset i think, the laptop remains unresponsive, the keyboard doesn't work, so I can't do ctrl+alt+del, the mouse pointer also disappears, the only thing i could do is a hard turn off, losing all my job....
View 1 Replies
Oct 9, 2015
Every time I try to join a wifi network, my computer crash within a few seconds. It says "system service exception" igdkmd64.sys in the bsod. So I just cant connect to the internet anymore.. im on my phone right now.
Windows 10 from win7
Intel core i7-3610qm
Intel centrino wireless-n 2230
View 6 Replies
Jul 31, 2015
I just installed Windows 10, but every time I start up the computer, it will show a black screen before getting to the login screen and then the computer will restart by itself after about 5 seconds.
It does this over and over again.
Some things I've tried:
- I have multiple monitors, so I tried disabling the other in BIOS. Didn't work.
- I tried booting from the integrated GPU rather than my NVidia GPU. Didn't work.
- I unplugged my second monitor. Didn't work.
- I updated my NVidia driver through safe mode. Didn't work.
View 4 Replies
