I tried rebooting, and no go. It didn't identify the right hard disk.So I repaired the boot with macrium reflect recovery disk.I booted to windows, and after five minutes, I get a BSOD complaining of the failure of a critical file. It was unable to create a log.I restored my system from a macrium reflect system image, and so far so good. normally I would blame it on the electricity flickering on and off, but my pc is powered through a UPS, so a flaky electricity supply shouldn't be an issue.
Lately I have been facing this problem of not being able to create new folder. The "New" option in the right click is missing and I am not able to create anything new.
After updating to windows 10 i'm having problems creating snapshots (Volume Shadow Copy Service?) when creating backups. Before I updated to windows 10, I was able to do this on my Windows 8.1 installlation: URL....But after windows 10, I'm no longer able to do so. I get the follwing error code: 0x80042306
Also I have Acronis True Image installed on my PC. It also worked pefectly before update to windows 10 but now when I try to backup my files i get an "Unable to create snapshot"-error. The offical Support: URL>.. The only link I can find between Windows System Image and Acroniss is VSS, but I cannot figure out what causes the problemes.
This worked for me a few weeks back. Today I am looking to try to reload Windows 10 on one of my desktop PC's that has just never been right after upgrade from Windows 7. I figured, trying a clean install is in order. The trouble is, as of today, the MediaCreationTool is not working for me. I get the same error on all 3 of my Windows 10 computers: "Setup couldn't start properly. Please restart your PC and try again." I can say that the mediacreationtool worked splendidly a few weeks back, but I have already repurposed that jump drive so the media is no longer in tact.
Specifically, the tools on this page are not working for me: [URL] ...
My PC's have always been real smooth, but now all three are just not quite 'right'. Mouse disappearing hear and there while I am dragging it. Pauses before I can type, etc. Just weird random anomalies that are far from normal.
I did the free upgrade offer to Windows 10 from a Windows 7 Ultimate Dell T7500 with an Xenon motherboard. I am unable to create the "RecoveryDrive" USB from the utility: recoverdrive.exe.
I have google searched for solutions with no "direct" solution. I have upgraded 8 other windows 7 PC's to Windows 10. About half will NOT create the recovery drive. What is the recoverydrive.exe looking for, in order to declare a failure?
Finally, I find on this forum steps to download the windows 10 ISO, using that ISO to build a bootable USB. You are directed to have a Windows key. QUESTION: can this key be the one I have with the Dell Windows 7, to be used with a Windows 10 ISO?
have a new dell inspiron 15-55580 with win 10 installed at factory. unable to create a recovery media drive using usb drive (16 or 32 GB). receive error message: a problem occurred while creating recovery drive."
I am having a problem trying to get Windows 10 Build 10041 installed on one of my computers. I am getting an error message(see screenshot) trying to create the account on install. I do not have this problem on build 9926.
While trying to create a recovery dish I get message that an error occurred and unable to create a recovery disk. If I uncheck backup system files to recovery drive it,creates the drive. Not having the system files will I still be able to use it to boot my pc if I need to. Originally Windows 7.
As with many I have upgraded to Windows 10 today and it is going well except for the fact I am unable to save any files or create new ones in the Documents and Pictures folders or any sub-folders within these folders. For instance, I tried to save an image created in paint and attempted to save it in the Pictures folder, it gave me the error message seen in this picture below:
Note, I am the only user on the system, and also the admin account so I do not know why it says this. Clicking Yes on the box does nothing and the same thing still occurs afterward. In addition, bringing up the right click menu and going to new only allows me to create a new folder, and the windows admin shield icon appears next to it. Deleting files also prompts me to ask for admin permission but in that case I can simply click the continue button and it goes through.
I just assembled a new PC. It has a single 4TB hard drive. During Windows 10 installation, I created a 200gb partition to install to as the C: drive. It auto partitioned my drive into a 500MB system reserved partition, my C: drive, and two unallocated spaces of 1852.69GB and 1678.02GB respectively. The 1852GB space I can create a partition on, but the 1678GB space I cannot do anything with: Cannot create a partition, and cannot combine it with the rest of the unallocated space.
I would like to combine the two unallocated spaces to create a single partition from the remaining unallocated spaces, but cannot figure out how. I contacted Microsoft tech support via chat, allowed them to remote in to my machine, but they could not determine the issue either.
I am currently running Win7 Ultimate service pack 1 and am trying to create an installation of Win10 on a flash drive before I replace some parts inside my PC that will require an OS refresh. Unfortunately I am stuck at this screen.
I am sure my OS version is activated and I have extracted my windows key via Magical Jelly Bean finder but it rejected that key.
P.S. any PC stats linked to this account are a different piece of hardware
When I click on save button the contact page closes, but the contact is not created in the contact list. I am able to create it from people.live.com and sync it back. Hard reset is the only way? Soft reset doesn't work.
I recently installed Windows 10 from 8.1 on my HP pavilion laptop (I got it just over a year ago, not sure the exact model). All I did was go through the free upgrade process.
Everything seemed to work fine in the first 24 hours, but now I encounter a blue screen with grey lines when I try to boot. Eventually, after a few attempts (on its own) at rebooting, I get to the repair/restore screen. System restore hasn't worked in the few times I've attempted it, and I can only boot up in safe mode without networking.
I have no media disc for Windows 10 or anything like that, and I'm relatively inept in programming.
I keep getting BSOD and random freezes that make me unable to use the computer, so i have to restart it and hope that won't happen again. Happens randomly, there is not an specific trigger to this. Leaving the minidump file to make it easier!
Upgraded Win 7 Pro Dell laptop to Win 10 Pro. Screen resolution changed on first win 10 boot and other resolutions greyed out. Windows update says unable to update Intel HD graphics drivers. Downloaded win 10 drivers from Intel site and installed. On reboot get continual bsod as above. No restore point since upgrade. Can't boot to Windows. how to get past the bsod
I have a dell inspiron 7000 and recently reinstalled windows 10 into my laptop after I received a system thread exception not handled error with a bootable usb. After painstakingly spending a whole day (10 hours) I succeeded in restoring my laptop with windows 10. Nevertheless, I accidentally restarted my laptop while the bootable usb is still in the usb drive and now my laptop does not even load/boot. The screen just freeze trying to load up the OS as in the spinning dots when the windows first loaded up, after 3 dots loaded, the whole screen freezes. in addition, when I try to load up windows repair, it'll load up an extra dot and freezes at 4 loading dots; I can't even load into the hard-drive through BIOS. The good thing is that I can still access the BIOS and do diagnostic test and all the stuff from BIOS. Other than that, I'm unable to access my computer.
Due to corrupt windows files my pc is unable to start. i am able to go into the bios, but after that it will freeze on the windows logo during start up. i have made a usb windows 10 installer and tried to start the pc up using that as my hard drive (went into bios and changed it to use that as my hard drive) but it still freezes on the same screen. I even unplugged my hdd and booted up but the same thing happens so I don't believe the problem is with my hd.
I want to set up another calendar. I have a Microsoft account. Can I have multiple calendars on a single machine? When I read the instructions they say to click her or there but the options are not available.
I have been using windows 10 on my Acer Aspire since Microsoft first offered it. Today it has come up with a bit of a surprise. I no longer have the ability to create new folders on my desktop or anywhere else. Previously I would right click on the desktop and in the popup window select "new" then "folder" et voila a new folder. Now if I right click I get no such options.
Since windows 10 has been launched and it has already been downloaded on my PC and installed. I wanted to know how to create a boot-able DVD so that I can also install it later, you know like doing a completely fresh installation and having the windows staying activated. Cuz windows was upgraded to 10 from 8.1 and Microsoft didn't gave me any key, so if I install it again on the same device will it remain activated?
I have a handful of questions and issues with "Create Recovery Drive"
1. How dose Windows 10 Recovery disk work? When I first tried to create a recovery drive, it specifies the drive size I would need. One said I would need a USB that would take up to 8GB, the other specifies 16Gb. Since USB drives come in it's denominations of 4,8,16,32,64,...., I got 16GB and 32GB respectively.
2. Does Recovery USB Drives need to be recreated once in a while as an update since system files are added to the USB?
I have three Windows 10 PCs I need to create Recovery Drives on each of them with system files inclusive.
3. New Del Desktop, arrived with Windows 10 (64Bit). It asks for a USB that would take 16GB, I inserted 32GB but it created a recovery drive that is 8+GB only. Why? I wish it would have asked for 16Gb so I don't have to spend to get the 32Gb USB. By the way, when I inserted a 16GB USB, it would not continue.
4. Dell notebook XPS, upgraded from Windows 7 (32Bit) to Windows 10 (32Bit). When I tried to create a Recovery USB drive, it asks for 16Gb USB. When I continued, it stalled at a windows that would not highlight the "NEXT" button. This button is grayed, so I cannot create a Recovery USB.
5. Third PC is a HP desktop I upgraded from Window 7 (64Bit) to Windows 10 (64Bit). The Create Recovery USB with system files did not work. When I started the recovery, it just kept chunning and chunning for a very long time and will not stop.
