I came home from shopping and turned on my custom built desktop PC and it gave me a BSOD. On the screen it said "system thread exception not handled". This only happened once
DIN-PC-10_10_2015_190348_82.zip
System Spec
Computer type: PC/DesktopSystem Manufacturer/Model Number: Custom built OS: Windows 10 64 bit Home CPU: Intel i7 3770k (not overclocked) Motherboard: ASUS P8Z77-V Memory: Corsair 16GB
My PC is crashing nearly every 30min but Bluescreen view has only showed a problem with an USB driver which I already updated and now Bluescreen view doesn't log anymore Bluescreens but my System is still crashing.
My PC is Overclocked and has a 750w power supply.
I already tried reinstalling Windows 10 but it didn't work.
After leaving my computer alone for a few minutes my computer restarts with a REGISTRY_ERROR BSOD. I have disabled ".NET Framework NGEN v4.0.30319 Critical" and ".NET Framework NGEN v4.0.30319 64 Critical" and also ran sfc/scannow with no integrity violation. I uninstalled and reinstalled my graphics drivers and also reseated the card.
My two and a half year old pc, after switching graphic card, started to get BSOD about two weeks ago, saying Whea uncorrectable error. I did some research, and tried resetting CMOS, updating BIOS, and memtest86 to see if my rams are done. I also used some intel tools to check if my cpu has problem, but there was no signs. I thought about updating my drivers, but nothing worked. I did not oc my cpu, and it was at safe temperature while gaming, around 50-65.
I got really confused, so I decided to reinstall os, I cleaned out everything with a fresh install. My pc worked well with no BSOD for a week. I did not copy any of my backup files on my external hard drive to the reinstalled pc, and now while I was playing game(assassin's creed syndicate this time) , it happens again, still WHEA UNCORRECTABLE ERROR. I am confused that it does not seem like driver or software issues, so would it be hardware issues?
How to read dump files or anything and can't seem to solve it.
I run Win10 under Parallels at MacBook. Few days ago it started to crash about 30 minutes after boot. I don't need to do anything, just wait and it will die. Usually it's REGISTRY_ERROR, but sometimes another error.
sfc shows some errors, but they don't look dangerous.
I've talked to Parallels guys and they claim it's Windows issue, not VM. Checked Win7 VM and works fine.
I am having this problem with my computer, where I am getting random BSOD's when i have been playing any game for about 5-10 minutes. The BSOD is either the IRQL_NOT_LESS_OR_EQUAL or the APC_INDEX_MISMATCH
I have attached my debug files here : debug-DESKTOP-DQ0658B-23-09-2015_190058,20.zip
Basically what happens is, I get BSOD errors when my computer is idle after about 5-10 min, pretty consistantly. It doesn't happen after a windows complete re-install for about a week (give or take) then I start seeing symptoms again. Ive also been getting, what seems to be the same 3, not in ay particular order.
They are: SYSTEM_SERVICE_EXEMPTION, MEMORY_MANAGEMENT, and PAGE_FAULT_IN_NONPAGED_AREA. After doing a lot of homework and trial and error (not installing Norton Internet Security, Not updating Chipset Drivers...etc) ive resulted to the professionals. FYI Ive ran MEMTEST 86 at least 8 cycles with no errors.
My computer started to crash every X random minutes,It started yesterday. I didn't install or uninstall anything.Using "Who crashed", it claims that something is wrong with my Intel Gigabit Ethernet card. I've update it to the latest available from Intel, but the problem persists.
The computer seems very stable right up until I let it go idle. After 4 minutes I get the REGISTRY_ERROR bsod. The system is not over clocked. CPU temps are low. Memtest86(+) runs fine for 8 passes with 0 errors. Disabling the two .NET tasks that start on idle in Task Scheduler made no difference (as per the post with a similar issue). CHKDSK /R requires a reboot and no messages are present on the screen while running but there is no log file generated in Event Viewer / logfiles / application. I ran sfc /scannow and got errors. A reboot and retry did not correct the error. I ran Dism /Online /Cleanup-Image /RestoreHealth and it successfully repaired the system. Subsequent scans with SCF indicate no issues or problems. Not sure if it is relevant but the system has a Samsung 950 SSD as the C drive.
I have been monitoring for several weeks to try and find a pattern. After startup (fresh) or from sleep by Pc works fine for a several minutes or hours then just freezes!! I thought it was the sleep issue but now i notice it does it from a fresh start.
I have also tried using different browsers no different. It can happen when dragging to another monitor but it also happens when doing nothing it just freezes the mouse. I cannot recover i cannot activate Task Manager. I have reboot via pc power button.
I have latest drivers i think also Event viewer report not shutting down properly not sure if that is the crash or what. I keep loosing lots of work I am on.
The search bar, lower left on the task bar, does not allow input for searching. It blinks, and does not allow for a question to be entered. Perhaps I've turned it off, but would like it back on.
I recently updated my pc software frm win 7 to 10.nw when I switch on pc after win logo display the screen remain blank fa abt 30 mins then it goes to sleep. This problem is happening after update to 10.
After the upgrade from 8.1 pro to 10, i noticed system protection was turned off. I went ahead and turned it back on and moved the slider back to ten percent.
I've been trying unsuccessfully to use Windows Update but keep getting the error code 0x800705b4. Windows Defender is turned off, and both Windows Firewall and Norton Anti-Virus has been temporarily disabled, but it still won't work. I don't know what's wrong.
I always used to set the turn off display after 2 or 3 minutes, everything was working fine with my old PC but after the new PC whenever the screen is turned off i can't turn it on again buy using the mouse or keyboard.
This problem was while using windows 8.1 and after installing windows 10 pro the problem is still there.
Tried turn off hibernate solution but with no luck.
Connection with monitor is throw HDMI cable with the internal Intel 4600 VGA Card
I fixed some issues on my of and now when the pc is off the USB ports remain on. Is there anyway where I can turn them off without ungplugging them ex: I have some USB lights for my pc and they are always on now same for my mouse lights.
My pc used to be on windows 8.1 and I never had this problem. Ever since I installed windows 10 I have noticed that it has been randomly starting up. I shut it down and then wake up the next day finding that it had randomly turned on during the night. It shows the log in page as usual with no signs of being locked, standby or anything else. it shows as if i shut it down and turned it back on again manually but i haven't. This only started to happen after I updated windows 8.1 to 10 so i dont think it has anything to do with the motherboard.
recently upgraded to win10 and that went well.. However on the last update (I think) that went bad. My pc now looses all apps when turned off. When restarted, I have to reload windows live mail and re-enter my email account. All my contacts seem to have been lost as is my email history.I use google as my web browser and I have to re-enter all my settings here also.
When turned on, my pc loads quickly but after logging on, it goes to "preparing windows" which takes some time before it is usable.
updates installed around the time of problem are;
kb3081448 kb3081449 kb3081452 kb3081444
..this is the update after which I think the problem started
I have windows 10. When I turned on my laptop it says that it updating and it stucks in 87% then I turned it off and after that I opened it it still updating?? Is it normal with windows 10 ??
Yesterday, I inserted a flash drive on my PC and it was loaded with trojans. I managed to clear them with Kaspersky but after that I noticed that all the hidden files in my C drive have turned Un-hidden. (Including desktop.ini's)
So I was doing a system restore on my newly upgraded Windows 10. It was stuck at 46% so I restarted it (which was a stupid thing I know). After that the laptop won't go beyond the black screen. Whenever I boot the laptop the lenovo logo appears and the black screen after and that's it. I'm really worried now.
Somehow not sure if a update did it but cortana got turned off and so did my location stuff, so what the defaults are as i never played with it much, but want to reset it to default?